Posted Jan 7, 5:57 PM
im running the compu 1024ec program

im using 4 roboscans 812

and 2 adj mega pixel led light

the robo scans are on a I rail about 12 feet high by 8 feet wide the roboscans are about 2 feet apart from each other and the adj mega pixel light are on the tripods here is a pic



notice on the wall i have them all lined up well close


but when i build it in 3 d the 2 light on the right in the pic blow i cant those 2 light to even up with the 1st 2



im trying to get everything lines up with each other

im trying to make a room 20 x 20 with a dance floor thats 20 x 20 with a i beam 8 feet long and 2 tripods holding the i beam that 12 feet high

is there a way you can help me with this please

That's simple. Adjust them in the 3D so that way they are lined up like on the actual fixtures. i can see your 3D pic. you do not have them all in a line or even connected to the truss like you do on the actual rig. Try it. p.s. check out the new signature.
Sincerely,

yes lights are hooked up on the rig and on ...

i tryed all that i can get everything to line up .. is there a way you could build me one and sent it to me pleas

nice signature ill one like that someday as soon as i get this all set up

Build you what?

a 3 d stage .. with the spec above

First let me show you something.

That red circle. You hit that to create a screen shot of your 3D stage. will look better than the one u had. lol Just letting you know.
Even if i built you a 3D stage it still won't line up right like your current problem. Why? Cause i am not there. i don't have the lights in front of me. Your close you just have to move the 3D fixture so that when your scanners are straight out on your real rig so are they in the 3d. It can be done. Try it.
Sincerely,

ok will try again it will be about an hour or 2 stay close by please

don't have to stay close by. i have an iphone and i can respond from ANYWHERE. long as there is wifi or data.

ok i got it made .. and it dosent look to bad

Well it won't be 100% accurate but will be close. Just program your positions when the lights are plugged in.
Sincerely,