Hey. New to the forum. I need a profile for the Irradiant Mini move. it's 4 channels. I dont have a link to the values, but i can type them if needed. Anyone know where i can get one or can you make me one? I'm using Compu Live software and have already checked the online catalog with no luck. Thanks

If you can type the values that will be great. Otherwise I really cannot make a proper profile for you.
Welcome to the forums.
Sincerely,

Okay here is what I have. Hope it is what you need

CH1 0-255 Vert Movement (270 degrees)
CH2 0-255 Horz Movement (360 degrees)
CH3 0-36 Blackout
37-71 Blue
72-107 Green
108-142 Red
143-179 Blue and Green
180-215 Red and Blue
216-251 Green and Red
252-255 Blue, Red and Green (white)
CH4 0-255 Strobe fast to slow

Hope this is what you need. Thanks a million. Will the profile have movement macros and presets or just the basic operations? You're a life saver
Phoenix

Hey Jingles, never heard back if this was what you needed to create my profile? Do you need anything else?

Yes. Sorry. The day just started for me. But yes that is all I need. Thanks.
Also let me verify this, That fixture has tilt as channel one and pan as channel two?
And yes the profile will allow the software to generate pre set movements.
Sincerely,

Yeah, i know, its wierd. But how it is above is just how it is layed out in the manual. I really appreciate it. When do you think you will have it done? I would like to use them in a show this weekend, so wanted to program tomorrow or Thursday. Thanks again

I can have it for you by the end of today for sure.
Sincerely,

Here you go.
http://db.tt/8XU4BX7
Sincerely,

Well, I downloaded it and installed it but it is acting very crazy. None of the channels were working properly. So i hooked it up to my old DMX board (DMX 55) and addressed it as fixture number 1. It seems that this may actually be a 5 channel fixture. Maybe the manual is wrong?!? CH 1 does nothing at all. Then the remaining 4 channels operate the fixture just as described. I hate to ask this, but can you make another one with updated channels? So CH 1 would do nothing(???) and then CH2 would be Vert Move, CH3 would be Horz Move, Ch4 would be the color Macros and CH5 would be strobe. Sorry for the mix up, maybe I got the wrong manual?
Thanks

http://db.tt/thihK3P
try that one.

It s closer. The movement macros are not working properly. Nothing seems to resemble a "heart" or "square" and no control with the mouse. The Blackout and first color (red icon) do nothing. The Green icon turns on Blue, the Blue icon turns on green, the Red/Green turns on Red. 1st color macro is Blue/Green, 2nd is red/blue, and the one marked COL 1 is red/green. No Red/Blue/Green. Also the beam flickers all the time. Anything?

Also there is a "mode" section to select DMX, Auto or music

Well the only think I can think of is for you to write down the values preset for preset. since the manual is not correct I have nothing to go off of and you have the actual fixture and can test more quickly than I ever could.
Or you can learn how to create your own profiles. It really is not hard at all once you understand the basic concept behind it.
Sincerely,

I actually have programmed some basic stuff in the past. Could try it. I'm not sure how to get the movement presets in the page. I can handle the others i think.

Could the movement problems be due to Vert on Ch1 and Horz on CH2?