Was wondering if I might be able to get a profile for a Martin Mac 301?

I've heard there are a couple different modes and I need the 16 bit profile.

Thank you.

There are four different modes and mode 4 has 16bit RGB and all have 16bit pan and tilt. You looking for mode 4? It'll be kinda tricky as Compu live's ssl files only support RGB and not fine RGB. But I think I can tweak it.
Sincerely,

Here this is mode 4. 15 channel mode and fine RGB control: http://db.tt/cLSrKSU
Let me know how it works out.
Sincerely,

Yeah I think that is the mode I need. However I cannont get the beams to show up on the visualizer. I have them at Center. I clicked the dimmer fader, I opened the shutter. Ive clicked around just to see if I missed something an I cant get anything to show up on the visualizer.

You need to pick a Color from the color picker.
There is no light source unless there is a value on for the RGB channels.
Sincerely,

Yeah I did that as well and still no beams.... Ive clicked every button on the profile page and cant seem to get it...

me either. Weird. I'll have to get some help on this matter. I can have an answer for you tomorrow. Sound good? What release date is your Compu Live program?
Sincerely,

2006 i think...

No I mean like when it loads it says the date in the spalah screen. For example nov 4th 2008 or June 8th 2010. What date is yours?

sorry... its Nov. 4th 2008

Ok well we have a much newer release date available for download for free. But before I tell you to do that what model interface do you have? Also if you are happy with tour release date that you have, like it is not buggy or anything you don't have to update to the latest. It your choice. Let me know.
Sincerely,

COMPU 1024 EC

I have had this version for almost 2 years now.

Its shut down a couple times on me but hasnt for a while since I put the software onto a new PC.

The couple times it does shut down is when Im on my Behrenger Control Surface and it says that the controller is not responding.

Im all ears for what you think is best as far as updating but it might have to wait till after the weekend. The reason why I need these profiles is because Im doing a set at the All Good Music Festival this weekend and would hate to change things up right before this big gig.

Ok, We can talk about updating your software after you're gig. I think the reason you are not getting any beam output is the fine RGB channels are messing with the beam output as it is not a supported function of Compu Live. I opened up a mode 3 profile and the RGB beam works fine. Let me try a few things.
Sincerely,

ok I fixed the profile. it was the general control channel that was messing with it. Any icon you can use now and you should get beam output except for the one in the pic below that is crossed out with red.

Here is the new profile. check it out and let me know.
http://db.tt/cLSrKSU
Sincerely,

James,

Im really sorry, but this didnt work either...
My screen looks just like the picture you took of your screen and the fixtures still wont produce an output...

If you have any other suggestions please let me know...

Thanks