If I read the manual correctly, when using the PlayBack Master Faders in the HTP mode the bump key can be used as a "GO" function. When the fader level is zero (from a previous scene)and the "Bump:Go" button is pressed, all non dimming circuits will fade up, after which you can up the fader to light the scene. Is this correct?

Could I then have a scene where the fixtures profiles (gobos, colors, etc) will go to the preprogrammed level, before I bring up the dimmer level?

Can I program the "Bump:Go" button to "snap to before" (by creating a scene with 00:00:10 fade time) and turn on the SOLO button to make sure that the scenes don't track into one another?

Then I can PrePosition my fixture attibutes before I light the scene .

This message has been edited. Last edited by: jim m,

Good question.. i'll work on it.

Any chance "HTP" will be added to the show designer 2? Just wondering... Have a lot of LED fixtures that need to dim.

Jim, that was the purpose of that feature. Just play around with it and see what happens. I would use a scene with 0 fade time to set the non dimming channels up using the bump button. On the latest software update, the playback operation can now be set up individually for each playback.

For the SD2, I'm pretty much out of room in the memory to add any major features like that. Sorry.