So, I just got my X moves, and I am using the DMX Operator Pro controller. I have assigned my lights to channel 1 on the light to correspond to fixture 1 on my board. My pan and tilt (sliders 1 and 2) are working fine, however according to the instructions with the lights, 3-8 shoulld be controlling color, gobo, brightness, etc., and I am having no response. I have tested my lights using the test feature built into the lights, and everything is working fine, so Im totally stuck at this point. According tothe instructions, everything should be working at this point. It seems like to simple of a problem to be this stuck on. Help please!

Headyhiker,
Please make sure that the X-Move LED is not in stand by mode. There's an option in the menu that reads "BLND", make sure it's set to "NO".

Let me know if this works

Sergio,

After many headaches, my problem ended up being a fader issue. With the lights I am using, fader 5 controls the size of the shutter (open closed strobe, etc.) and fader 6 controls the dimmer 0-100. For the lights to work, fader 5 must be at 255 and fader 6 must then be up to 255. It basically took trial and error to get it goin but we are up and running now!!! Thanks for the help!!!

Looks like someone didn't read the manual. haha. I am just joking. Glad you got it figured out.