forums.elationlighting.com  Hop To Forum Categories  DMX Controllers  Hop To Forums  Basic Programming    dmx operator 192 went dead!!!
Go
New
Find
Notify
Tools
Reply
  
-star Rating Rate It!  Login/Join 
Picture of jingles
Posted
hey all i was gettin ready to use my lights today and when i went to hook my usb led light into the unit(my dmx op 192) i tried to put it in but it was the wrong way and i went to take it out and the unit went black. turned itself off and won't come back on!!! i am prob. gonna have to send it in huh? my main concern is will my programming be gone if this is the case??


James D. Keeley
Elation Professional
Compu Live Tech Support.
 
Posts: 1102 | Location: wausau, wi | Registered: 07 January 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of jingles
Posted Hide Post
bump^^ jonny?? anybody??


James D. Keeley
Elation Professional
Compu Live Tech Support.
 
Posts: 1102 | Location: wausau, wi | Registered: 07 January 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
shorted out the fuse on the pcb.
 
Posts: 14 | Registered: 07 January 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
it would be burnt or blown, not shorted...

It doesn't necessarily have to be a fuse though. Have you check the power supply? Maybe something internally fried when you disconnected the light.

Most likely need to have it sent in.

-Homeboy
 
Posts: 16 | Location: US | Registered: 11 February 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of Elation_Pro
Posted Hide Post
What's up Jimbo, I can't believe this happened to you.
Frowner how did you put the USB light backwards?
Anyhow, you can open it up and take a closer look at the inards, just don't try to do a service job on it.
Take a look at what may be wrong, if anything is burnt, smell it and or look for a fuse.
If its burnt, you will need to send it in.


John J Lopez
Elation Professional
 
Posts: 543 | Location: Los Angeles, CA | Registered: 05 January 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of jingles
Posted Hide Post
i was a lil tired and i forgot which way the port was suposed to go in. im sorry man it hapens to all of us man!!! i will take a look when i get a chance and i will call u up or somebody from support. u think maybe as long i don't have to solder anything u can send the replacement parts and i can do it myself or with phone assistance?? u know i am capable jon. jingles!!


James D. Keeley
Elation Professional
Compu Live Tech Support.
 
Posts: 1102 | Location: wausau, wi | Registered: 07 January 2007Reply With QuoteEdit or Delete MessageReport This Post
Picture of Elation_Pro
Posted Hide Post
The problem is, once you try to fix your self, then no more warranty, However since you plugged in the USB backwards, most likley that is not covered in the warranty either.
But it may not just be one part, maybe its a few things that were damaged? Maybe its just a fuse? Its better to send it in.

Best regards,


John J Lopez
Elation Professional
 
Posts: 543 | Location: Los Angeles, CA | Registered: 05 January 2007Reply With QuoteEdit or Delete MessageReport This Post
Posted Hide Post
Jingles

If you get the board repaired I would label or mark the plug on the lite. so it would never happen again.

I hope its not too bad
If it is not under warranty
If the power supply is good.
The usb has two power pins they might have just got bent. Look in side the plug in the board. If you can see contacts and look for any crossed or missing ones.

C/ya
 
Posts: 20 | Registered: 24 January 2007Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 

    forums.elationlighting.com  Hop To Forum Categories  DMX Controllers  Hop To Forums  Basic Programming    dmx operator 192 went dead!!!

Copyright Elation Professional 2007 Los Angeles, California USA