Hi i have a problem with programing with a shape chase.I bring up the scene that Ive programed and then a simple shape chase and all is good but when i go to turn off the shape chase all the light's do not go to the scene focus they all go to the factory 50/50 focus in other words I'm just trying to have a scene and add the shape chase over it and then just toggle it off just the way you use the off feature on the Avo.
Can you help
Thanks Lenny

should work the same way.
What do you mean by factory 50/50 focus?

Ok wait.. I know what you mean.

The top buttons designate what the 48 buttons below are doing.

Are you turning off the shape chase while the top chase button is activated or while the top scene button is activated.

And also are you saving your shape chases?

This message has been edited. Last edited by: Elation_Pro,

I have tryed to turn it off both ways and i have saved the shape chase and also moved the sceen to a play back fader #7 and the shape chase to playback fader #8 and still when i fade down the fader the movers move to a 50/50 pan and tilt.

can you save your file and e-mail it to me?

support at Elationlighting dot com

attn: john Lopez

Envision, have you sent in your file?

Just sent the files.It has been along week.