Hello, I have done multiple searches on this website and the internet to try to find some answers, but cannot find anything. So, if this a repeated question I am sorry. My problem is that we cannot figure out how to separate the lights. We have a Scene Setter 24 and 2 Optima Lighting OPDM-20 dimmer packs that are linked together. The problem is that all of the lights turn on with the 1, 2, and 3 sliders or faders (whateveryou call them) and we have about 14 lights, 8 that are pointed at our stage and 6 lights that are colored and are on the wall behind the stage. And, some of the color lights turn on with a couple of the lights pointed at the stage on the 1st channel slider. And then the rest of the lights pointed at the stage are on the 2nd channel. And the last two color lights are on the 3rd channel. Is there any way to separate these? Would the problem be most likely on the dimmer packs or on the light board? Thanks in advance for all of your help!

hi tommy,
its on your dimmer packs.
the console has to work 1 channel at a time, so your dimmer packs have to be addressed accordingly im not familiar with your dimmers so you need to contact optima.

cheers