I have run into an issue in the patch section of emulation. As I am adding lights in patch It has only allowed me to add roughly 50 fixtures and i have a total of 78 independent lighting zones. Is there a limit as to how many lights you can put in the software. I was under the understanding that as long as you stayed with in 512 channels i should be fine and i am only at 333. If anyone could shed some light on this for me that would be great.

Thank you,

Well from the product page:
• Maximum 48 Individual fixtures, plus 10 sub fixtures each (e.g. 10 [3ch] RGB led fixtures can be regarded as 1 fixture)
Ya there is a limit. you might have to group or duplicate some addresses for some fixtures....

Do you still need the profiles? Let me know.

yes i do still need the profiles for those lights i mentioned in the other post. as well i just got out of a meeting and after discussing it with him, we had to do some reprogramming and im going to need the 16 channel mode for the mega pixel pro as well.

here are the links from the other post.

The american dj Atmospheric RG
http://americandj.com/pdffiles/atmospheric_rg_led.pdf

The american dj x-move led plus r
http://americandj.com/pdffiles/x_move_led_plus_r.pdf

The american dj Vio Scan 5 channel mode
http://americandj.com/pdffiles/vioscan_led.pdf

the american dj vio roll 5 channel mode
http://americandj.com/pdffiles/vioscan_led.pdf

thank you so much for your help it has been quite the lifesaver

mega pixel led not pro

ok I should have them all done for you within a hour or 2 tops.
Sincerely,

thanks james, i really appreciate it

OK, here you go. all are in here and all should work good. I did not test these on the actual fixtures but they look good in the program.
http://db.tt/GBYh1zR
for the x move LED plus R the movement macros on channel 8, the speed fader for them is in the position part. Any questions let me know.

Have fun.
Sincerely,

I had a light added today into the system for the American Dj royal 3d. And I can't find it in the profiles.

http://www.americandj.com/Prod...Id=2&Category=Lasers

Give me until morning? I am sure i can make it for ya sometime tonight before I go to bed.
Sincerely,

Here you go. once again it is the entire updated ADJ xml file.
http://db.tt/GBYh1zR