Skip to main content

Cannot change dmx channels on the Scenesetter 24

I purchased an Elation Scene Setter 24 about 2 weeks ago and I can't seem to program the dmx channels to each fader. I followed the procedure that is in the manual ie. Put into record mode by holding down the record button, tap the flash buttons 1,6,6 and 8. The record led lights up properly. I then press the Record button and tap the Flash 6 button three times while holding down the record button. The manual then state that I should use the Up or Down buttons to select the dmx channel. This is where the problem is, I can press the Up or Down button (s) and nothing appears to happen. Is there something I am doing wrong?

Any help would be appreciated.
Original Post
×
×
×
×