Skip to main content

Reply to "DMX Operator 192 fade-time issue on tilt-channel"

Hello

Thank you for your quick answer.

I had did a lot of testing and believed that there was nothing more I could do before I found out one final way to do some testing and this solved the problem.

What I did was: I assigned the pan-high and tilt-high to the correct channels: channel 1 and 2.
My fixture does not have a fine channel and uses 5 channels, starting from channel 1.
I then assigned the pan-low and tilt-low to channel 9 and 10 which is not used by my fixture.

So the solution is: Not to assign pan-low and pan-high to the same channel. And the same with tilt.
But what is more interesting is that you need to assign a low channel even if your fixtures don’t have one.

Does it make sense?

Kind Regards.

One last note: my box is a “Botex” box but I bought it as an “Elation”. I believe it is the exact same box but Botex don’t have a forum so I asked in here instead because I was wondering if this was a general problem with these boxes, hope that is okay. Maybe the same "bug" is also on the "Elation" boxes ?
×
×
×
×