Reply to "Dongle Failure after firmware upgrade."

This morning I moved the DMX cable, after making a 5 to 3 pin adapter and for the first time got DMX down-line with the movers cycling at startup, which is the first time since the upgrade, however, still unable to send any commands.

Here is the strange thing... I shut everything down and restarted and no longer have DMX going down-line. The dongle lights have no consistency when it comes on line. In all cases the dongle come on-line with the 3 lights on the right, bottom red slow flash, middle yellow on solid, top green fast flash, and A01 in display. Sometimes when going to PC there will be a red light on the lower right corner on solid or slow flash, and sometimes there will be a red light on the left under the third button down either on solid or slow flashing.

Anyway still no control either on DMX1 or DMX2. I have a second dongle coming from B&H tomorrow, just in case. dB
×
×
×
×