Skip to main content

Reply to "Elation DP-415 DMX Dimmer Problems‏"

I know for sure that the LED RGB strip still works (turns on in my old configuration, below). I am looking to control the RGB of the LEDs, so I believe switch mode is not needed. Using my desk lamp connected to the DP-415 did not do anything (flash than nothing). I don't have a "foot controller", unless it was included with the DP-415, sorry I'm unfamiliar with these parts and the terminology. I've read DMX 101 and my manual several times.

Regarding your statement that "you absolutely cannot dim an LED fixture with the DP-415", how do other things like light strip/LED par cans work? As far as I know, it should be possible.

Here's a parts list of my previous set up that works:
https://www.dealextreme.com/p/...-type-110-240v-15989
https://www.dealextreme.com/p/...t-strip-dc-12v-14965
https://www.dealextreme.com/p/...t-strip-dc-12v-14964


And here's the new part replacing the old control driver with remote control:
http://www.holidaycoro.com/product-p/361.htm

Hope this is enough information.
×
×
×
×