Skip to main content

i need a profile for a couple stage ape lights please

i need a profile for a couple stage ape lights please here is all the info i have

REEPER Instructions

DMX Mode: Operation
Slider #1 controls mirror A.
Slider #2 controls mirror B.
Slider #3 controls mirror C.
Slider #4 controls the mirror movement speed 0 (down) being fast, 255 (up) being slow.
Slider #5 controls gobo change for mirror A
Slider #6 controls gobo change for mirror B
Slider #7 controls gobo change for mirror C
Slider #8 controls gobo change speed 0 (down) being fast, 255 (up) being slow.

PYGMY Instructions

For DMX Mode:
On the fixture set dip switch #10 to the on position. Connect the controller to the fixture via DMX
cable.
Channel #1 controls the left mirror
Channel #2 controls the right mirror
Channel #3 controls the speed of the mirror rotation
Channel #4 controls the LED pattern for the left mirror
Channel #5 controls the LED pattern for the left mirror
Channel #6 controls the speed of LED pattern rotation for both sides
For MASTER / SLAVE Mode:
Connect the two fixture via DMX cable. Then set the dip switches on the first fixture to either sound
active or auto mode. On the second fixture set all the dip switches EXCEPT #9 to the on position. The
lights will sync up and do the same thing.


Thankyou very much in advance
Original Post
×
×
×
×