Reply to "magic 260 and SP4led"

hobsonMember

Some say not to plug any fixture with a transformer into a dimmer box. But I've used the M260 connected to a DP415 (in switching mode) to turn on and off both an Agressor and a quad phase with no problems.

The M260 manual does not say use channel 264. It says that the Aux buttons use channels 261-264, e.g., Aux1 uses ch 261 and Aux4 uses channel 264. When an Aux button is on it sends out a 255 DMX signal (Full ON) on its assigned channel; and when the Aux button is off it sends out a 0 DMX signal (Full OFF).

So: (1) put your SP4 in switching mode, if possible (if it is not then dimming mode - although this might be riskier), and (2) set the DMX receive channel to 261.

Each Aux button will then turn on and off one of the four outlets.

6/28/127:07 AM

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...