Skip to main content

Reply to "Newbie w/ Scene Setter 24"

Mattrix,
The T16F works a little different from the Dp-Dmx4B, so you'll need to assign each pack it's own address.

The T16F uses 5 channels of DMX and is automaticaly assigned to channel 1 when placed in slave mode. Raising slider 1 to value 255 will allow you to have control of the 4 channels on the pack using sliders 2-5.

The Dp-Dmx4B will need to start at channel 6 (dip switch 1,2 and 3 to the on position). You can assign the same address to the third dimmer pack and control them together or assign it to channel 10 (dip switch 2 and 4 to the on position) and control them individually.
×
×
×
×