Skip to main content

Tagged With "Chorus Line 16"

Everything
Reply

Re: scene setter 24 dmx channel addressing

Carl N ·
Luis, I have tried that numerous times. Granted , it has been about 10 years since I have used DMX lighting. My last controller, An Election was a breeze to address. This is my second Scene Setter 24 in four weeks. The first one my salesperson and I assumed was defective. Now, for many years I have used XLR mic cables and I am learning that they may not work with todays new lighting components. I am assuming there is quit a difference between XLR and DMX cabling... So, I presently have...
Reply

Re: scene setter 24 dmx channel addressing

Luis ·
Carl, If the steps provided did not work, I suggest reviewing the instructions found printed on the bottom plate of the controller to verify that the steps provided match the "DMX CH. Assignment" setup, which is what you are trying to configure. Also, although XLR cables are physically an exact replacement of DMX cables, we do highly recommend using DMX cables, strictly for lighting. As far as addressing these lights, considering that the Scene Setter 24 is only a 24-Channel controller, it...
Reply

Re: SD1 increase fixtures

sdman ·
You can have more than 16 fixtures as long as they will all fit into 512 DMX channels. Look at the multi-fixture section in the manual.
Reply

Re: Roller Rink Wash with LED?

Jingles8302 ·
mikey wassup man? long time no see huh? how ya been. ok down to business. i would look at the design led 36 moving heads and a bunch of octo strips. what is ur budget? also look at the ELED blinder and the design panel and also the trackpod 81. jingles! and how i would mount em is put the heads towards the center of the rink and line the outside with either strips or trackpod 81's. my opinion. jingles!
Reply

Re: Compu Pro 06

mikelights ·
The program should not be crashing, we have used the new version for days on end without hiccups, let alone a crash. The latest update is Oct 16, also make sure you are using the suidi5 driver, as it is designed for the newer interfaces. Conflicts in PC's are very common, if your problems persist, send me detailed info about your system and I will look into it. Oct 16 version and new drivers
Reply

Re: Compu Pro 06?

Jingles8302 ·
ok first of all when u got to ur "pages" page and u see the 3 little boxes? make sure all ur lights have a mark in the box that looks like a king crown. that will link all ur lights to work in the "master" page. now that all ur lights are lined up to work in the master page u can click on the master page abnd hit the new scene button and then click empty. and then when you edit it you will find that all ur fixtures are lined up ready to progrma all together for one nice synched effect. yes...
Reply

Re: Compu Pro 06?

Jingles8302 ·
ok i got it! what u want to do is put a 5 sec fade time in the second blue time box. the one with the solid blue line going up and then u want to put the last time (fade down) in the last red time box. the one with the solid RED line going DOWN! ok? try that and let me know!
Reply

Re: Need help w/ DMX Operator

elationpro ·
Hi DJ, Yes it could be bad. If the DMX driver chips are damaged, then they will still work sound active. Try using your friends board and a light also to see if both your lights and controllers work. If it is DMX drivers, then you will have to send it in for service. No other way around it. Elation makes this device. DMX Branch 4. It is created to supress over voltage to the DMX signal. Once overvoltage goes through the line it takes everything out. However most people don't sell this or...
Reply

Re: Help w/ DMX addys

homeboy ·
The first pack should have only the first dip switch up and the second should have only the first and third up. This will make the channel 1 for the first and 5 for the second, thus covering all 8 channels you want. No, you can't separate the two plugs so you get 8 channels out of each pack, its strictly 4 channels. However, yes you can add more packs and "piggy back" or "daisy chain" (which ever term you prefer) off of the DMX outs from the last dimmer pack. You should already be doing this...
Reply

Re: Compuware04 and SCX500's

Jingles8302 ·
do ur lights have 8 bit or 16 bit pan/tilt resolution. maybe u havw that feature turned off on the 1st 4 fixtures?? we are talking about the martin scx500's right?? if so check what dmx mode u have all the lights in. this is ali can think of right now. don't think it is the software. peace! jingles out!!!
Reply

Re: Rookie needs help with terminology

mrlights ·
Let's see if I understand... I can have up to 6 pages, each having up to 6 scenes. "On" each page, I can have up to 16 chases. If that is corrrect so far, does that mean that I have only 6 different settings (scenes) that I can use in those 16 chases? Each chase is not unique - correct?
Reply

Re: Rookie needs help with terminology

Jingles8302 ·
ok. u have 16 "pages" which hold 6 scenes per page. and each chase is blank till u put any of the scens from ur 16 pages into it. so u havea total of 96 scenes to progrma and record and organize into ur chases. understand now?
Reply

Re: What's a good laptop config to run Elation Sofware

franco ·
Thanks for your assistance and emails... with your help I found the perfect computer Acer Turion 64 2 gig ram with 512 vram. Now if I can just get everything to work. I'm using a wireless remote to trigger Easyshow from my pocket that goes to the audio system with video from the time line going to 2 monitors. The remote systems come from Wirelesswizardry.com. Next is integrating the lights into it all! Franco
Reply

Re: eNODE 4 different firmwares

Zach.S ·
The different Software shouldn't be an issue, but we do always suggest you update your enodes the the most recent version. Do you have the enodes running in line? I would suggest testing it individually just to check to see if you get a different reaction.
Reply

Re: pics of my designs on compuware.

Jingles8302 ·
hey flash i was just messing around with like 16 of those demo moving heads. you know the one that load up when you first install the software. i just love those. and i got another 16 performance scans spread out across the stage as well as over 10 (forgot how many lol) par 64's flash let's see some of your renderings my brother!! LOL. i am curious to see others work on compu. peace! jingles!
Reply

Re: Stupid Question but help

Jingles8302 ·
hey delerious! elcome o the forums. i am pretty much the exact same way you are except im trying to make a job out of it. i suggest u download compuware. you do not need dmx for it. but you do however have to understand how dmx works. here is a link to the software. COMPU LIVE 06' and download the april 16 2007 edition ok. and for this software you can do exactly what you just describe with it and more! i'll let you take this in and then you acn get back to me. i can help tach ya too. p.s.
Reply

Re: Design Spot 250 Fade Issues

Jingles8302 ·
hey and welcome to the forums. now when u create these scenes are you using the scene fade toolbar or are u just adding a fade when u edit it in easy step? if ur using easy step u can turn off fade times per channel. it is the little box with a red line in it all u do is click that and apply them to he channels you do not want to fade. u can use thst i believe in conjustion with the scene fade toolbar. also make sure you are putting ur fade times in the right boxes of the scene fade toolbar.
Reply

Re: dmx stregnth

Jingles8302 ·
do u have a terminator on the end of the line?
Reply

Re: Compu Live Questions

Jingles8302 ·
well does it affect the actual light when programming? like when it is in the home position on ur real life stage does it move to where the head is positioned on the visualizer? also to edit a scene in init u need to turn on the fader. cause in init everything is locked down. so to edit ur init scene so that way ur heads are the same as u would on stage u need to click on init so that way it is on then hit ctrl and then hold down alt at the same time then left click ur init button. (you can...
Reply

Re: Compu: RGBMix colorwheels disappearing!!

level10 ·
wish elation had a 24hr tech support line! or at least till 2am HINT HINT
Reply

Re: Stage setter 8 question

surgeprotech ·
I assume that you're using dimmer packs. Are you exceeding the maximum load? How many packs are you using? If more than 1, do you have them on separate circuits? Is the dmx line terminated
Reply

Re: Stage setter 8 question

waynek ·
Thanks for the response. We use 2 elationdmx20l dimmer paks on separate circuits, 4 par cans on each, and to the best of my knowledge the dmx line is terminated properly. I don't believe we are exceeding the maximum load as the lights worked fine all last year.
Reply

Re: Comp U Pro questions

gfuller2000 ·
John, Thanks for your help,apparently there are several issues running Compu pro on Vista,Bottom line.........too much "hassle for me" The good news is The re-sale value was great & my Brand new Magic 260 meets my needs & learning curve etc VERY WELL !!! Thanks again GARY
Reply

Re: compu 2006

evolution78586 ·
Thanks jingles.First of all I have 6 Power Spot 250 and 4 Power Wash 250..Is there anyway to edit that one fixture when I'm creating the page for the spots? you know, after it ask me to enter the DMX address and the # of fixtures then it takes me to the next step that asks me if all the fixtures are on and facing up. My concern is, if i edit just the center button once the page is created,the fixture s still gonna be out of sync with the other pre set cycles/scenes. The fixture giving me the...
Reply

Re: Help with buying the best controller

elationpro ·
12 par 64, 4 trackspots and 3 martins, puts you at 19 intelligent fixtures and 16 conventional fixtures. It sounds as if you buy the operator, you can get away with using the operator and nsi 6128 and not use the universal controller. Or if you want to go with one board, you will need the SHOWDESIGNER 3. If that to big, you may want to consider Compu 1024EC. Not many consoles offer controll of 16 par cans with moving lights.
Reply

Re: Design 36 LED

pulighitng ·
i have alos just noticed that the unit has a 7 chanel DMX asignment sheet on line and the manual says it is six chanels How am i to know which i have ? This may help as the first chanel of the seven looks like it now addresses my issue
Reply

Re: Compatibility Issue solved.

Jingles8302 ·
mike do u have a DMX line tester? if not se if u can get ahold of one and test the signal goin in to the dimmer and then the signal goin out of the dimmer. just a thought. the dimmer really shouldn't be doin that though. peace! jingles.
Reply

Re: Compatibility Issue solved.

elationpro ·
Hmmm.. It sounds like you are having data issues. This means that either one of the cables is not working well. or 1 light or dimmer has a bad output. Here is what I recomend. Try connecting one thing at a time. 1 dimmer, then 1 light, 1 dimmer then 1 light I think you will find the problem this way. As you connect each dimmer, make sure you bring intensities to 100% before you connect the next light. When you find the problem, change the cable. And if all the cables are good, then change...
Reply

Re: Two BCF2000 controllers with CompuPro??

gfuller2000 ·
Maybe try the "Learn feature" on the BCF2000.If you have both in line ,you can assign most scenes & Shows to which ever board & knob you would like..... Good luck....GF
Reply

Re: Compu DMX In problem

Jingles8302 ·
are you terminating the last fix. in the line? stupid question i know but i got nothing! lol. if anything tomorrow when you get a chance call our service department and see if they can help you. i have never tried hooking my 2048FC+ up to my dmx operator yet. sorry. jingles!
Reply

Re: Compu DMX In problem

schadow ·
Nov. 9th is what is says on the website. I didn't look at what it says in the software. I posted on thier forum and was told to open the _global.ini file and change the line LOADFIRMWARE=YES to LOADFIRMWARE=NO. It helped clean up about 90% of the flicker but it still does a little bit. Thanks.
Reply

Re: Replacing my controller

dan ·
Forgot to mention, for now it would be controlling 6 mac 250's, 24 par 56's and 16 pinspots. In the near future all the pars are being replaced with LEDs.
Reply

Re: I Can't Decide!!!!

choirboy ·
This is in a chruch and I will be running all the house lights this way as well as any concert or theatre type lighting up front on the stage. There are 12 rows of house lights, each 600w per row. I want to be able to dim them individually so they will stay broken into the same sets they are now, just putting a dimmer in the line. I also have 4 can lights for the stage that are 1000w each. I looked at the Elation DP-DMX20L last night at the store and I was surprised that right on the front...
Reply

Re: Dmx basic positioning and termination

Jingles8302 ·
hey drew! 1) no you can have it all mixed up if you want you just have to address them where you want them is all.so you can have like 2 scanners and two moving heads and have it go scanner head scanner head instaed of feeling like you have to go scanner scanner and then the 2 heads. 2) try putting the hazer as the first in line or maybe try going from lights to haze then back to lights in your line. understand? peace! jingles.
Reply

Re: Octopod 80 with Magic 260 profile?

Jingles8302 ·
hello lemon! welcome to the forums. i think the problem your running into is the magic 260 controls only 16 channels per fixture. so if u want to run all the octopods as individuals you would have to buy more pixel drives in order to achieve this. because to control one set of octopods individually u would need a console that allows up to 48 DMX channels per fixture. u see the pixel drive and all 8 pods are considered (as far as your controller is concerned) as 1 fixture in the DMX line.
Reply

Re: Hey Guys!!! I'm Back . . . again

tylerherron ·
Hey John, James told me to tell about this. It is a quick story that I experience on tour. Our lighting guy is 16 (yes they put a 15 and 16 year old in charge of all that equipment, scary huh?) He really isn't a lighting guy he just knows how to run the software. He really just wants to play in a band. Anyways for awhile I have been learning from him, but now it is different. Since I've been on these forums as well as the ADJ forums I have learned ALOT. Well at one of our shows we had the...
Reply

Re: COEmars and elation fixtures on the same control???

ybravo89 ·
I forgot the exact model of the controller, but i know for a fact it is a universal controller. The coemars are 16 channels each and the Elation Focus Spot 250R are 11 channels each. Can you tell me how i can set them up? Thank you very Much
Reply

Re: COEmars and elation fixtures on the same control???

Jingles8302 ·
well how does your controller block the channels? like one fixture button holds like 16 or 32 or 48 dmx channels. let me know then i can tell u how to address them. sincerely,
Reply

Re: Magic 260 Issues

elationpro ·
Hey guys, when you talk about auto correct, are you reffering to position correction? the feature that brings the light back to original position? If so let me know, I've never heard of such an issue from being used outside or with a specific lighting console. Doesn't make sense to me. From serra's original post if it works fine with a 16 channel generic and not with the profile, I will point to the profile for the problem. let me know
Reply

Re: A couple of questions about design spot functions

Jingles8302 ·
actually steve why dont u give me a call and i can go over it with you. i might be in and ouf of my office throughout the day but if u leave me a voicemail i will get back to you a.s.a.p.! call the number for tech support and ask for either james keeley or the compulive tech support line. sincerely,
Reply

Re: Magic 260 Issues

elationpro ·
Serra, My guy tested out the profiles with our fixtures, and everything worked just as good as if they were using 16 channels. What we found is that the profiles also work fine, and he informed me that he believes its a bad joy stick. The joystick could be sending bad commands that cause the lights to react. When your on 16 channel mode the joy stick is not active.. so it works perfect. When you use the profile, Joy stick is engaged and you have issues. If you just bought it you should be...
Reply

Re: Octopod 80 disaster

ben ·
I was the customer rely on professionals and paid for. It is the installers first duty to care what you now want to say. It is the manufacters duty to describe his product e.g. "depend on certain invironment conditions". Your product is offered with guaranty and is to build into the ceiling. The ceiling always has different invironments. These lights were delivered to Florida, what would you expect in Florida at the coast line - dry air like the dessert or cold like Alaska or even rainy as...
Reply

Re: EasyShow

Jingles8302 ·
Hey nick! im not too sure if thisis what you mean but you can copy and paste scenes in the timeline. just right click on the scene you want to copy and then move the red line (the counter) to where u want to paste the scene and then right click and select paste at current time. let me know if this is what you needed. thanks! sincerely,
Reply

Re: EasyShow

nickcarbone ·
well, i have about 100 scenes of a crazy variety of lengths throughout each song... i was wondering if i could select all the scenes and their locations for each song, cut and paste them wherever i want, for instance if i insert another song in the middle of the setlist, i have to move the last few songs down a couple minutes to line them back up.
Reply

Re: DMX Operator Pro

Jingles8302 ·
OK WELL THE PRO BLOCKS THE FIXTURES IN 16 CHANNELS EACH. THAT MEANS THAT FIXTURE BUTTON ONE CONTROLS CHANELS 1-16 AND FIXTURE BUTTON CONTROLS 17-32 and so on and so on. so if you wanted to put 1 led one each fixture button they would need to be addressed as follows. (assuming they are 6 ch's) led 1:001 led 2:007 led 3:017 (that would be on fixture button 2) understand where im goin with this? if you have dip switches here is a helpfull tool DIP SWITCH CALCULATOR Sincerely,
Reply

Re: black lights

serraava ·
I apologize in advance for the very long and off topic post I am about to post. SCR dimmers work by chopping the sine wave of AC. This is how they 'dim'. AC is a wave. DC is a line. Now when power is created, is is created by a magnet spinning in a coil at 60 times per second, thus 60hz AC. This is how and why the wave is created. The little sine wave above, the start as 0 degrees, the first peak point as 90 degrees, the next mid point as 180 degrees, and the bottom peak point is 270 degrees...
Reply

Re: Demo Download?

ebaclights ·
Hey Jingles, Nice stage! I am wondering if you can design me a stage, that I can import into compu? I would have you build me one with lights and all, but I am looking at doing several different things with the stage, so I will add my own. I don't care about adding all the details, if you could just do the shape and layout it would be great! The stage is 45' wide, 16' deep, the ceiling peaks at 18' and goes down to 10' on the side walls. The only rounded shape is the front lip of the stage,...
Reply

Re: Design 36 LED - Initializing Problems

elationpro ·
Hi Matchless1, Ok here's what came back from service. MAIN PCB! (#LED025,LED026) GOOD IN STOCK So if your fixture is still in warranty, which it should be becuase it has a 2 year warranty, you can send it in for service. Or you can call the service dept and buy the main pcb and attempt service yourself. Elation service line: 866-245-6726 ext 593. Best regards,
Reply

Re: Chauvet LED-PAR83 Profile

djheydt ·
Jingles: My email address is dheydt@westriv.com so if you want to try and email me a profile at that address, that would be fine....but my home computer is not working very well....but give it a shot, if not I can have you email it to my work place or my computer man...I think I emailed you on one of the other forums last summer, I had some questions concerning programming and the easy show time line program (dragging and dropping scenes) which I will work on later...Thanks...Dennis
Reply

Re: SS8 Question

serraava ·
The problem sounds like the chase is effecting the channels your strobe is on. You need to edit the chases so they only include the PAR channels. Not sure how to do it on the SS8. Look at your manual. If you still can't figure it out or you are confused, drop another line and I will try and help you out. A strobe isn't really an intelligent fix, just easier to control with an intelligent controller is all. Should see some of the crazy things I have to do. For example, I am running an all LED...
 
×
×
×
×