Skip to main content

Tagged With "profile"

Reply

Re: New profile for SD3

rc ·
Your profile request was received. Please note due to amount of requests we receive it may take a few days before your request is completed. If you have any further questions feel free to email service@elationlighting.com
Reply

Re: Elation Satura Profile G5UFan1 Er

Zach.S ·
Hey @Michael Dimsey , I would check number 5 board. That board would be the PCB with 7 Drivers Located towards the LED Source. It should have a sticker labeled HY1324/5U01, or the board should have a PCB1127-0-C. That fan should go to that board and connected to 5JB1. I would just follow that connection to the fan.
Topic

New profile for SD3

truwrshp ·
How do I get a fixture profile for a new one I have. I have attached the user manual. I want to use the 16 channel set up.
Topic

Blizzard HOTBOX exa Profiles

John Leonard ·
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic

R2x beam and spot profile needed

Scott H ·
i need a profile for both rouge r2x beam and spot for compu live please!
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Needing two profiles to add to Emulation software.

Brown Note Tech ·
Needing profiles built for Chauvet Intimidator Spot 110 10 w and Blizzard Lighting Lazer Blade G. I have attached the manuals with the information. Any help would be greatly appriciated!
Topic

Fixture Profile for American DJ Focus Spot 3 moving light

phillipmaz ·
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic

Elation Satura Profile G5UFan1 Er

Michael Dimsey ·
Hello, Can anybody help me locate g5UFAN1? My fixture is showing an error and I would like to try to replace the fan. Thank you!
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated August 9th 2019 with new release.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated original post Nov. 11th, 2019 with V1.0.10
Reply

Re: Fixture Profile for American DJ Focus Spot 3 moving light

ELA GINES ·
greetings please send profile request for the show designer 2 to support at elationlighting.com
Reply

Re: Fixture Profile for American DJ Focus Spot 3 moving light

Jingles8302 ·
Hello, we actually do have a profile online for this fixture, you can download it here: https://www.dropbox.com/s/9vwp...a/FOCUSSP3Z.sdf?dl=0 This profile is for 18ch mode.
Topic

Colour 5 Profile Fixture Firmware

elationservice ·
Upload tool: E Loader III Colour 5 Profile Firmware V1.0.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Profile Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Fuze Profile Firmware V1.09 What's new: When moving black out, DMX Value for Pan/Tilt is above 240, the unit will not output Improved sensor detection which would cause pan or tilt error previously Remove “max not resettable” led temp from menu Improved timing between zoom and frost. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader...
Topic

Fixtures for GrandMA3

Jan Wyden ·
Hi Our event hall buys Fuze Profile, Fuze Wash FR and Fuze SFX. We have a GrandMA3 Light, Unfortunately I have not found any fixtures for the MA3. Does anyone know where I can find some? Thanks a lot Jan
Reply

Re: Fixtures for GrandMA3

Rainschn ·
You can use MA2 Fixtures and convert them via Export to MA3 Fixtures. I think there are some Videos in the Web who are explaining how that works.
Reply

Re: Fuze Profile Fixture Firmware

ELA GINES ·
shoot me an email with your info.. gines dot gines at elation lighting dot com
Reply

Re: Fuze Profile Fixture Firmware

Rainschn ·
Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded. Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.
Reply

Re: Fuze Profile Fixture Firmware

ELA GINES ·
make sure you are using a 2.0 usb. also where there any issues prior to the upload? any errors
Reply

Re: Fuze Profile Fixture Firmware

Rainschn ·
I'm using a USB Stick plugged into the lamp. No Hub. One of the lamps had the same error before the update. Now another one has that empty Module 6 to and the Zoom and Focus doesn't work either. The two other lamps are working well as before, after the update.
Post
×
×
×
×