Skip to main content

Tagged With "1.20"

Reply

Re: ELED

studio42 ·
Excuse me for getting low tech and wanting to help you get the job done: 2 suggestions: Power strips/bars and extension cords. If the fuse won't handle the load, it depends where the fuse is inline, and clearly it's in the inbound portion. I thought it would be elsewhere. Use 4 per "daisy chain" and burn 10 or 11 outlets via power strips and extension cords. I mean, if I was under the gun like you are, and I did the math like you did, I'd have come to the same conclusion after about an hour,...
Reply

Re: DS 250 case

studio42 ·
Sorry, I fail to see why one would rely on a web forum instead of getting on the phone for making a business purchase decision UNLESS you're in active online conversation with a vendor, VAR or retailer. Nightraven's answer could have easily been had in 15-20 minutes or less total time if a phone call had been made. A company called Hybrid Cases has cases for the products you want. Look them up online. I an reminded of them because I just got an insert included with my copy of Live Sount...
Reply

Re: Bored, so I figured I would post some photos

serraava ·
I am from a place called Washington Township in New Jersey. its about 20 minutes directly south of Philadelphia, hence South Jersey (North Jersey and South Jersey should be different states with how different they are, you wouldn't know its the most densely populated state living in Southern Interior, nothing but trees and farms). Anyway, thanks for the complements. Been a few years since we were down your way. Last time we were down there, it was at the Desert Ridge Marriott in Phoenix.
Reply

Re: new cyberpak, not at full power

studio42 ·
OK, an Altman 6X12 draws 750-watts each. 2 fixtures is 1500-watts. Source Four draws 575 watts. The Cyberpak claims 2400-watts total output, but that's conditional on 600-watts per channel maximum draw. There is an output limiter, but that's still not going to address your problem. The problem is you need a higher capacity pack. The Cyberpack isn't going to be the right gear for your situation. The DP-DMX20L is 10 amps/channel, 20-amps total draw. This might be more allong the lines of what...
Reply

Re: new cyberpak, not at full power

studio42 ·
I did quick research on the fixture models to get my numbers. It's not surprising that Serra Ava informs me that these fixtures come in a variety of wattages. It doesn't surprise me, these are some decent fixtures. I still think you need to ugprade to another dimmer pack. While you're getting 100% draw out of the dimmer pack, you're not delivering 100% to some of your fixtures(probably). If you're drawing more tahn 600-watts/channel, this is definately not the right fixture for you. Not...
Reply

Re: new cyberpak, not at full power

serraava ·
The DP-640B is 20 amp per 3 channels. Channels 1-3 are leg 1 and 4-6 are leg 2. Now, the new packs on them say 5.3 amp per channel max while the old ones are 20 amp per channel max. Now, I have put more then 5.3 amp per channel on the new ones with my reasoning being that the old ones can handle it (why make something that can handle less?), the new ones are UL certified, and they have 15/20 amp outlets on them. You can't put a 20 amp outlet on something that can handle 5.3 amps at the max,...
Reply

Re: DMX Operator Slider problem

studio42 ·
Well, now we apparently know the hourly rate they charge for repairs. Regardless, glad to hear all is better. Another thing to keep in mind when it comes to repair issues. But I'm not anxious to crack open gear for no valid reason in my environment. My recent similar thing was with my truck. Replaced batteries(needed it), still wouldn't start. Either a bad starter relay or solenoid. Got both parts for like $60, which was $20 less than the mechanic said the relay ALONE would be. Replaced the...
Reply

Re: LED fixture questions

mu0p ·
Good to know, the tri led fixtures you guys have though look more like the led mega bar pro, where its just about 20 led "dots". I'm looking for something like a wall washer like the led mega bar but with rgb leds. Since I have you talking fixtures, are you guys looking into oled stuff? I think it fascinating the things you can accomplish with it
Reply

Re: MIDI Time Code - Frame Rate settings?

mu0p ·
Just thought i'd share with you my setup. I've got ableton live running and have midi going out, then loop my midi out cable to go into my midi in, then create clips in ableton that play certain midi notes that I assign to compu live button. So if Im doing a club, my lights are always sync'd up with the music by adjusting the tempo in ableton. Then I have my g1 sending wireless midi to my ableton, so I trigger everything on the go! Here is a pic of my current setup: Id like to build a case...
Reply

Re: Magic 260 "GO" button

hobson ·
Sergio cleared this up for me. As the manual makes clear, the GO button allows you to manually step through each scene of a show. The manual is not clear (at least to me) that the scenes will play automatically even if the "Manual" setting is set to ON if the TAPSYNC button is activated (in which case the GO button does nothing). So if you wan to use the GO button, make sure that the TAPSYNC buttong is off. [Hold it down for 2 seconds.] Thhe AUDIO button overrides the manual setting in...
Reply

Re: Move Scene to another PC

Jingles8302 ·
Butters yes this should work. Once you import the .spa archive file then go to page settings and where it says channel say 1-10 just below that you can offset channels. Say from 20-30. Try that and let me know. Just hope it works for stuff programmed before the offset. That I have not tested. Let me know how it works please. Also save a back up copy invade this doesn't work or you make a error. Sincerely,
Reply

Re: Using NSI ND4600 with DMX Op Pro

elationpro ·
Studio is correct.. if you have only 2 packs then it makes sense buying new packs. this item is best used for installations that have about 10 - 20 packs.. then it makes sense buying just 1 converter.
Reply

Re: Magic 260

hobson ·
Getting the fixture profiles installed on the M260 is a good start. Hopefully you chose profiles that used less than 16 DMX channels. If you profiles with a higher number of channels you will need to redo the installation with profiles with 16 or less channels. If you want to keep things simple for now, I'd suggest that you use a low - maybe even the lowest - number of channels for each fixture. You mentioned 20 fixtures and said you had others. The M260 can control up to 24 fixtures or 24...
Reply

Re: DMX profile for Design Spot 575B

audix ·
I liked work this fixture in 20 channels.
Reply

Re: DMX profile for Design Spot 575B

Jingles8302 ·
you can download the Compu live profile you need from the link i pasted below. I will have Elation_Pro contact you with the show designer file aswell as someone from ADJ for the Magic 260 file for you. Compu live profile for DS575 B in 20 ch mode: http://db.tt/3TNlc0W Any further questions please let us know. Sincerely,
Reply

Re: Issues with programming CueLists in PC software

Jingles8302 ·
Gac-man. We have a unreleased Build 20 of V 1.03. That has the following bug fixes: Solved Bugs : - Playback settings like speed, intensity, attack and bundle were not saved and loaded correctly - Global blinder hotkey did not work - The virtual dimmer did not work correctly for RGB fixtures - Fixtures with the same shape settings are now synchronized. - Playbacks did not release during a 'break' - The Load and Delete could be enabled at the same time - Removing a target from a running...
Reply

Re: Issues with programming CueLists in PC software

bb ·
Hi there! Please, send the link for the new build 20, so I can test it to. Many thanks. Bruno, Emulation user from Portugal
Reply

Re: House lighting

elationpro ·
Hi Impedious, I hear and understand your situation. your still working on improvements in your facility. For your budget committee i would propose using the Moth theory. All churches want to get more people in the doors. Just as a light bulb attracts moths, so does a well lit church. the better lit up it is, the more people that will be attracted to it. If it is poorly lit then moths are not attracted to it. Given the fact you have in house electricians will save you guys tons of $$. that is...
Reply

Re: Which Software?

Jingles8302 ·
Hands down compu show software. It has a palette function that allows you to record focus, color, position and many others. Say you had a scene that put all spots on the drums. And you had 20 of those scenes. All you have to do is create one palette with the movers in position on the drums and save it. Then use that palette for any drums position. Now if you get to a new venue and the drums are not in their usual spot all you have to do is update that one drums palette and EVERY single scene...
Reply

Re: Plat 5r 17 chan profile help

cmb ·
Looking at the profile, channel 17 is 0-19 for color snap, 20 to 29 for split colors, and 30 to 39 for color gobo any. If I want the color to "snap" from white to yellow, I need to hit the snap button( 0-19) in my software program right?
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply

Re: How to decide on lighting controller

elationpro ·
Hi Maw, The console is pretty much the engine of your lighting rig. Its like buying a Porche with a hundai engine?? and yes there are consoles that are inexpensive but what you need to look at is you have 20 inteligent lighting fixtures dimmer packs = par cans haze machine Follow spot will not be on console That alone calls for a Magic 260 or better. Magic 260 controls 24 fixtures. I would go so far as to say that the magic 260 will be the least expensive console for your rig in our line of...
Reply

Re: Stage Setter 8 fuse blown

stevenragatz ·
Yep, that's what I guessed it would be, but blew through three 1A fuses to verify it... Checked the power supply and it seems fine for voltage and amps. Just ordered the replacement board for $20 so hopefully that will be the fix. Thanks for the link. Steve
Reply

Re: how to reset the factory record code and to operate the DMX controller.

joelc ·
Hello, To reset the record code for the Scene Setter, you must hold down RECORD, EDIT and the HOLD button. As you are holding these buttons down, tap these button in this sequence, 5, 10, 15, and 20. This should reset the password.
Reply

Re: SD2 Factory Chases resetting presets and channel values... Please Help

sdman ·
The short answer is no. But at 10-20 times the price you would expect more from those others.
Reply

Re: Beta

Jingles8302 ·
Hi strange. 1) If you are familiar with compu live then you are familiar with cycles. A cycle is like a stack list or a cue list. say you created 20 scenes, but didn't want all of them to play and wanted them to play in a set order and time. If you create a cycle and select your scenes in the order you want then you can play them back based on a set time or duration of each scene or you can have all of them or some of them trigger as a "GO" function. In the buttons tab click cycle and once...
Reply

Re: Edit a scene

rockinlighting ·
I use the first one in the row at a starting point in a song title. It lets me know what song I am about to pull up. If you have the master down you can use it to make sure you start on the correct scene instead of guessing or writing it down. I use abort 15 to 20 scenes per song and the band plays them in a different order every night. No set list, so I can call up a song before it starts. My shows are also done manually not programed or timed as a song because they may play it different...
Reply

Re: Need Profile ASAP- ADJ Duo Scan RG Laser

Jingles8302 ·
Yup. odds are red evens are green. should be 20 channels and 4 "fixtures". Bummer about the fire. Sincerely,
Reply

Re: how to install a fixture an dmx code the light

Jingles8302 ·
Ronald I removed the link in your signature as we do not allow any links on our forums too 3rd party websites or web stores. Sorry. Satxnate, you need to set each led pro to a DMX starting address. the fixtures uses either 6 or 7 channel I can't remember exactly. but by setting a starting address you are telling the par can which DMX channel to "listen" too from the DMX controller. And when you manipulate the correct channels the light will react according to the DMX traits programmed into...
Reply

Re: Design Spot with RDMX... How do we do it?

Jingles8302 ·
This was in the DS300 PRO user manual Page 34. http://www.elationlighting.com...ign-spot-300-pro.pdf Remote DMX addressing (RDMX) / Address Via DMX- This function allows the DMX address to be changed remotely from a DMX console. This setting requires special settings for both the controller and the fixture. RDMX is on by default. This function may be turned on and off, and is “ON” be default. Follow the procedure listed below to access the RDMX functions: Fixture Settings: 1. Access the main...
Reply

Re: HZ500 DMX OUT

serraava ·
I would say it is an output issue. Check to make sure the air intake in the back isn't block by anything. Also make sure to wait to turn it on after you fill it up with fluid. It takes a while for it to get through the sponge. You should also be able to sneak a DMX and a power cable through the slot in the lid, I have on many occasions. This video was shot about an hour after turning on a HZ-500 which is sitting just off down stage right behind the arch. Stage is 48' wide, 15' high, and 20'...
Reply

Re: Ficture File for GLP Impression Wash One

simon90 ·
Hi kann dir das fixure schon schreiben. Für den fluter kein Thema aber beim glp wird's schwieriger. Erstens du hast geschrieben du willst den Spot hast aber die bediehnungsanleitung vom WAsh hinterlegt. 2tens es ist nur der 20 Kanal Modus möglich bzw der 24 kanalmodus da beim 24 kanalmodus noch die movements mit dabei sind. Die frage ist ob du das brauchst. Der andere Modus ist nicht möglich da laut meines Wissens kein rot fein oder Focus fein geht. Bei den gobos is es auch schwierig da ich...
Reply

Re: FADER and SNAP controls

sinaloakid ·
Snap is where each value starts or ends. for example if channel 1 has different colors, then lets say white is 11-20. the color white will come up before you go into the value range of the color. so there is no delay. thats how snap before works.
Reply

Re: Introduction and basic questions

knownothing ·
I am assisting at a variety show at the local high school and the problem is that when lights are maxed out there is a high frequency strobe and when we dim to lowest level the strobe is way more powerful like a full strobe ( almost like a lightning theater effect. we have 4 of these (DP-DMX 20L) hooked in series and the indicator lights strobe on the lights that strobe. this is effecting 2 of the 4 modules. need help 48 hrs till showtime! all are on dedicated 20 A circuits. Please and thanks!
Reply

Re: DLED 60 Strip WA help!

michaeldrisk412 ·
They always have power running to them but we turn off the lighting board when we aren't using it so the lights aren't always on. We cannot kill power to all of our lights, we have just over 20 lights in our contemporary service and just under 90 lights in our sanctuary, so killing power to all of our lights is not possible nor logical as it would take entirely too long to kill power then turn the power back on when we need them. That being said, we have plenty of Elation lights in both...
Reply

Re: Overwrite Cues

philld ·
Ok, that is really close to what I'm looking for. Let me explain what I'm actually doing and you may be able to suggest an even faster way. I recently added 2 new fixtures to my compu show setup and I created approx. 15-20 scenes for each fixture and saved them in their respective fixture page. Now I go to my master page and load an exiting scene, and then go back to my new fixtures and load different scenes until I find one that works well. The problem is, I may need to change color, or add...
Reply

Re: x310 & x310-2

fslp1 ·
Thanks for getting back to me .If you run the unit on stand alone at 100% it outputs 50 to 60 % more then 100% DMX .The problem started about 9 weeks ago. I have a 3RD unit that works fine, befor that time all units worked the same. 1st unit 9 week ago 2nd unit about 7 weeks ago. Set them up on same DMX channel 1 works fine 2 unit 50% 3 unit 20% at 100% DMX
Reply

Re: Freeze ups and Lag

erniberni ·
hey there, I dont think that it depends on the laptop or any DMX limitations I got the same issue and can say a few things why I think that there is some code thats not ok. 1) I ran about 20 shows with the same (installed) setup, same laptop, same showfile, and with less than 32 fixtures (about 22 + 24ch dimmer and tour hazer) never got one single issue about freezing lagging or worse collapse. Exactly the first show after I updated to the release which included the 64bit drivers for first...
Reply

Re: Newbie question

serraava ·
Sorry for the late response on these question guys, I will try to explain DMX addressing now. The best way to describe DMX addressing is that it is like the postal system. First, you pick the address you want to send the letter to. Then the letter goes to the mail center, where it is sorted for delivery. Next, a mailman takes the letter and delivery's it to the address. The first step in setting up DMX system is you patch your console (Pick the address you want to send commands to). Since...
Topic

KL Fresnel 6 Reset.

ECSlighting ·
I just purchased a handful of KL6 and KL8 fixtures. They've been great for the last week but we just had one completely freeze at full on us. We've taken it down for testing and it doesn't respond to DMX or manual control. It can be seen through RDM and we can use the menu on the side just fine but the light just sits at full intensity. The other 20 we have are just fine. Is there a way to globally reset the fixture? Does it need a firmware update? Or is this our first (and hopefully last) RMA?
Topic

SD2 record new scene issue

incyoverhead ·
When I try to record a new scene after pressing "record" and then "scene", the lights will be reverted to the previous scene used before I can assign a number to the new scene. I have deselected all fixtures, presets and scenes before attempting to setup and record the new scene. This issue started a while ago and went away on its own, but now it is back and won't go away. The software is up to date (1.20). Any ideas?
Topic

Blizzard HOTBOX exa Profiles

John Leonard ·
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic

CW Profile HP Firmware

elationservice ·
Requires uploader tool: E-Loader. CW Profile HP Firmware V1.1.6 What's new: You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Artiste Van Gogh Fixture Firmware

elationservice ·
Uploader Tool needed: E-Loader III or USB Artiste Van Gogh Firmware V1.3.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Proteus Smarty Hybrid Firmware

elationservice ·
Upload Tool: E-Loader III/ USB Proteus Smarty Hybrid firmware V1.1.4 If your fixture does not include a USB Service Port which is used to upload software updates, click HERE to select the required uploader tool to update your fixture. Please contact firmware@elaitonlighting.com for further assistance.
Topic

Blackout activates automatically after20-30 secs..Scene Setter 24

PAjay ·
The blackout automatically activates after 20 secs..cant seem to find a way to stop it..Beside taping down the button ! Tried the reset codes found in this forum but no luck
Topic

Artiste Picasso Fixture Firmware

elationservice ·
Upload tool: None, fixture has a USB service port. Artiste Picasso Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Maximus Firmware

elationservice ·
Upload Tool: E-Loader III/ USB Proteus Maximus Firmware V1.4.1 If your fixture does not include a USB Service Port which is used to upload software updates, click HERE to select the required uploader tool to update your fixture. Please contact firmware@elaitonlighting.com for further assistance.
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
×
×
×
×