Tagged With "beam"

greetings please visit our Obsidian support page for any profile needs. http://support.obsidiancontrol.../Fixture_Library.htm

i need a profile for both rouge r2x beam and spot for compu live please!

I need a profile for "ADJ VIZI BEAM 5RX" for M-PC. My version of M-PC has a profile for "ADJ VIZI BEAM 5R" but it does not work with "ADJ VIZI BEAM 5RX". M-PC Build 3.42.570.0 Please let me know where i can download it if it is already available. If not please let me know what i need to do to get it created. Thanks in advance.

Greetings do any of the arrow buttons respond? if not you will need to remove he display and reseat the connectors at the back of the display PCB. if not successful then you may need a new display.

Hey guys, today I was doing bulb replacement, in one of our Protheus Beams I couldn’t unlock the Menu because the button seems to not working... Anyone had this issue already ? thanks in advance... maurice...

Arrows are working... Thanks for the quick response I’ll check the connectors...

can someone help me , does anybody have this profile fpr beam 230 pls email me isaacrgc@hotmail.com

Hi, for which specific controller product do you need this for?

Hi, just looking at the information you provided for the DMX chart, this isn't enough to really make a profile off of. so email me and we can go from there. jamesk@adj.com

im sorry i forgot to post that, its for elation emulatio

just email you thank you

a gobo error can have multiple causes, first check to see if the magnet is present, also check the magnet /sensor orientation as well. also make sure the gobo is in its correct spot. if not successful check continuity from sensor harness to driver. if the problem persists check the PCB. lastly physically check the rotation and make sure the stepper is ok. regarding shutter, are you able to physically open the shutter (make sure the unit is unplugged) if not then the stepper may have seized

Hi y’all! I am working on some Platinum Beam 5rs, and I am getting an error for Gobo rot 1. Does anyone if that is isolated in the head or on the pcb board? Also, I can’t get the shutter to open, are these problems related. Just looking for a starting place. Thank you and God Bless!

I will try those steps. Thank you!

Hello! I am having a problem with my Elation Platinum Beam 5r ex. When I tell it to turn the lamp on from the screen it doesn’t turn on. Is this normal? I was not connected to DMX at the time of testing if that matters.

Hi sorry to see you are having issues, 1) Are there any error codes on the units screen? 2) Has the unit been working fine and then all of a sudden no lamp output or was there any kind of "trigger" (power outage, spike, lighting strike, etc) 3) How is the unit controlled/powered normally?

1. No 2. No events, but was working before 3. We are attempting to patch it into our system, and we currently can control p/t, but the intensity controls the gobos, the frost controls the intensity, and a couple of other weird things. Update: I got it to power on. It was set to have a power-up configuration with the lamp off. I am still working on patching it into our lighting system, though. We use LightFactory. Has anyone patched one of these before? I think we are going to have to build a...

Hello there i do hope all is well and you are doing okay. In regards to this, based on what has been discussed it sounds as if the LAMP simply needs to be replaced. However for further troubleshooting please reach out to me directly via the support email line support@elationlighting.com and we can proceed from there. Thank you

hello there i actually just saw the follow up that you got it up an running. Glad to hear that as for the patching on that software i am unable to assist. i would highly recommend to reach out "light factory" directly. Thank you

Ok I will reach out! Thank you for pointing me in the right direction!