Skip to main content

Tagged With "Uploader Tool"

Everything
Topic Featured

Just Getting Started With DMX or Lighting? Read here first

Jingles8302 ·
If you are a beginner you may be finding yourself having a hard time with understanding how your light fixture works or how your controller works? You may be asking yourself, “What the heck are DIP switches?” and “What in the heck is DMX?” and you’ll most likely find that the user manual of your product does not explain this to you. This is because the manuals take assumption that you already know what DMX is and what DIP switches are for and thus proceed to explain the operation of your...
Topic

Saved Profiles Don't Work Correctly

madtroy ·
I was working on a project file. I had been saving the setting via the disk menu to my local hard drive as I had been experience random crashes of the program and losing my work. So when I tired to reload a previous saved file, my cuelists are still present but they no longer trigger the lights. I tried rebooting everything mulitple times. But again when I reload the xml settings file the saved settings and trigger a cue, it does work. I can manually trigger the lights, so I know it is not...
Topic

Probs with Magic 260

frankschlender ·
Hi guys, Greetings from sunny Berlin. We're using a 260 board with 16 Futurelight PHS 710 and PHW 710 heads. Nice Board, easy to use, nice design. Well... The joystick does not work at all. I checked with the Elation Dr. DMX - Tool (very nice tool indeed, btw.)- no DMX Output, when using the joystick. Strange. Same with the build-in presets. No function, nothing, no DMX output either. I'm stuck with this glitch. The joystick was an important reason to aquire the 260. Anybody out there with...
Topic

iPad Support

goldmatte2000 ·
I guess this is more of an idea than a request. I know that there is support through the rigger remote for iphone and such, but is there any way we could get better support on the ipad? I just bought one and would really like to make the large touch screen a useable tool. The internet based riggers remote is often slow depending on the internet connection. Maybe Elation/cuelux could design an ipad app that allowed more than just playbacks ie programing cues, controlling fixtures without cues.
Topic

corrupted signal

charlienext ·
my dmx controller operation pro isn't responing. Three week ago in a club i desconnected for 3 hours and then i swith on but the signal to start to dissapear, in fact now it doesn't work. I called to elation tool free but nobody answer.
Topic

rgb values

djwalmart ·
Is there a way to switch the rgb values in the program so that they represent a true 255 scale vs the 0-100 scale or is there a conversion tool to do so?
Reply

Re: Quick Color Assignments for LED's

matchless1 ·
Yes, Serra, what you are describing would be incredibly useful...especially the position pallets. Man, talk about a time saver when you get to the gig and realize your stage isn't exactly like you planned. Instead of physically adjusting EACH X and Y for EACH head in EACH scene, the palette tool seems way more efficient. Jingles, the quicker copying method (shift key) you describe helps, but still does keep me from having to re-create those colors initially for each scene. The palettes seem...
Reply

Re: Using Compu switches inside scenes

serraava ·
That would be a palette system. With a palette system, you save all your positions, beams, and/or colors. Then any scene or cue record using that palette will update automatically with that palette. For example, if you had scenes and cues that used the same focus for drums, you can create a position palette called 'drums' and use that palette for drum cues and scenes, then record them. Now when you go to another venue, simply update the focus on the 'drums' palette, and it will automatically...
Reply

Re: Midi foot controller to run DMX Operator via midi? Please Help!

greglawrence ·
Most pedals only transmit Program Changes and not Note Numbers - Here's how to get around that: I just got the MIDI Solutions "Event Processor" box. ($119 US) It works like a charm! John, the designer at Midi Solutions (midisolutions.com) was very helpful and really fast replying to my several emails. Here's how it works: You first program it using your PC with a MIDI OUT port with a really simple easy programming tool (free) you download from their site. (You can do it now and test it out -...
Reply

Re: Midi foot controller to run DMX Operator via midi? Please Help!

digitaldave ·
Thanks Greg. Sounds like just the tool for converting those controllers without 'note-on' sending ability. I do have one which is very versatile (Digitech PCM-10) and allows sending the 'note-on' messages needed. Though most controller don't as you stated. The info is good to know if I ever have to use one of the other 3 controllers I own which only send program changes. I presumed all of these would, but most don't! One thing I have noticed is some inconsistency between the 5 lights I have...
Reply

Re: Losing control due to Fixture Channels resetting

elationpro ·
Also, I would recomend not using the beginner mode. i've never been a fan of it. Instead I would recomend closing windows that don't need to be there. Close output window, cycle window and even page window. Leave only those windows that have the scenes and cycles and you can even close all the tool bars.
Reply

Re: Empty boxes in easytime

Jingles8302 ·
Easy step can be very helpful in making scenes with more than one step. Or the Efx generator is also a good tool. From what i understand from your pics posted above the empty boxes mean that at that time that channel is not in use and has nothing programmed to it. Sincerely,
Reply

Re: HZ-500 Mini Review

studio42 ·
It simply comes down to the right tool for the right job. For your work, an HZ-500 is the ideal tool. For me, with light(ahem...) work, the HZ-300 fits the bill right. You're doing lots of events, while I'm a sound company handling a secondary task of lighting and lighting is not high on my priority list. I'm just glad you steered me towards a hazer instead of the fazer. I'm sure it would have gotten the job done, but I don't think I'd have been happy with the results. I can't wait to see it...
Reply

Re: midi time code

sunspotwendy ·
I got MTC working in Compu Live over a wireless network last night. When you click the "MTC in" button, you will immediately see a clock next to it, syncronized with your master's MTC (assuming it is running). I'm not sure how you'd do it with MIDI cables, but over the wireless network the first thing I did was check to see if my computer was receiving the MTC. MidiOx is a good tool for this.
Reply

Re: compu Short Coming

Jingles8302 ·
Jerry how come you just don't program a bunch of scenes with those pan and tilt settings where you want them. The function of the X/Y in page settings is to limit the area that the pan and tilt will go or not go. Another good option to have is if you have a scene that sweeps the dance floor and you get to a new venue and you want to adjust the size you can turn on the live toolbar button and that will allow you to set the size dimmer and speed of any of the scenes on that fixture page. right...
Reply

Re: Synching Music Pulse effect

mikebaierdesigns ·
disappointed to hear this feature is being removed... certainly something I would love to see be implemented. Given the feature set of the software... a more "in tune" audio synch tool would be very useful and powerful. Hope to see something more useful and responsive added to the software.
Reply

Re: OPTI16-4 CW/WW

studio42 ·
I ran into this YEARS ago and posted it on the AmericanDJ forum, because, well, at the time, that's all I had was ADJ gear, not that I'm complaining. I had a strobe plujgged into a dimmer pack, and yes, at dimmer value of zero, there was trace voltage coming out, and it was causing this inexpensive ADJ to discharge, but a a rate of less than 10-15 minutes(try 5-7 minutes, if even that long, felt more like 3-5 minutes). The nightlight solution worked fantastic, and I also came up with this...
Reply

Re: MIDIcon Mapping

studio42 ·
I'm no expert on the MIDICon, but I'm learning Compu SHow. It seems i can map just about anything I want to anything else I want. In my case, since I have a Korg Nanokontrol, but it's running a JLCooper CS102 profile, it's technically already incompatibible with the provided MIDI controller profile. Yet, it still works great! All MIDIOX is gonna do is help you clarify what is or isn't working, it's strictly a test tool. If your hardware is working and MIDIOX seems happy, that's as good as it...
Reply

Re: MIDIcon Mapping

gtejeida ·
I have the perfect tool for using Midicon with Hog PC3 an Grandma PC. It works perfect !!! If anyone is interested let me know. Best Regards !!!
Reply

Re: MIDIcon Mapping

yaneck ·
I am very interested in this tool gtejeida! I actually use GrandMA onpc 2 and i think that this midicon wouldjust fit my needs!
Reply

Re: Chase speed

elationpro ·
Whats up TAP. Every page has its own tool bar options. So you want to click on the top left hand corner of the page, where the page name is, and right click, or shift right click for a list of about 5 tool bars. You want to select the live tool bar option which gives you a size and speed fader.
Reply

Re: Compu 1024EC Question(im a noob)

dunn ·
i do know about the scene fade tool bar, but dont think it is gonna help me with what i want to do. Lets say i have scene a, b, and c. i want to fade through them all the first time with a 3 second fade. then i want to go through them all with a 1 second fade. Is there a way to change this fade time with out changing the fade time to each 3 scenes individually? i havent tried using the master page - how should i try that way?
Reply

Re: How do I make Colorbars show projected light in 3D

wheresjc ·
Like Jingles said, you can't get this to work correctly out of the box. However, if you're really just looking for the beamage, you can patch the visualizer with a different fixture to give you the beam. Make a 3 channel RGB personality. Make it a conventional type. Make it a Changer. Adjust the dimensions to get what you want. Patch 1 of these in for each 'pixel' of your bar and place them next to each other. The conventionals and the movers are the only fixture object types that show beam...
Reply

Re: Behringer FCB1010 midi map

Jingles8302 ·
It's HERE! https://www.dropbox.com/s/l19p...i6705n/behringer.xml and a syx file: https://www.dropbox.com/s/5p86...ehringer_fcb1010.syx The XML file should be copied to Emulation midi map folder. To make it work, the FCB1010 should be reprogrammed with the sysex (.syx) file. We did this using this tool: http://www.mtnsys.com/?path=faq-fcb/PCEditorBeta.htm The website & program also explain what keys needs to be pressed on the FCB1010 to put it in programming mode. After this the DOWN...
Reply

Re: Solutions for Wedding gigs

serraava ·
Hi and welcome to the forums. It sounds like you are looking for a palette system. Basically, you make palettes for your positions and program your scenes and chases using those palettes. Then, when you go to the next venue, you simply update your position palettes for the new room and everything else that is programed using those positions is updated. There are more than one type as well, so it works with colors, positions, groups, and gobo/beam effects as well. It is a very powerful,...
Reply

Re: MIDI to trigger and make changes.

JWPardee (Guest) ·
yes, correct that you have to assign everything, however, once assigned the midi is a very powerful tool. x/y requires either two faders or two wheels
Reply

Re: ART 1024 Calendar

Jingles8302 ·
Kind of an old post i know but, did you sync up the computers date and time to the art1024 panel? You can do so in the tool app in the art1024 folder. Let me know if you have any questions.
Reply

Re: Compu Show SD Standalone with Cycle

Jingles8302 ·
Hi Richard, welcome to the forums. It is actually not possible to use a cycle in stand alone function. It doesn't support cycles. Just scenes and switches. It's somewhat limited, but still a good tool. Let me know if you have any further questions.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated August 9th 2019 with new release.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated original post Nov. 11th, 2019 with V1.0.10
Reply

Re: Connect Pixel Driver 4000 to Chamsys MQ40

Zach.S ·
Hey @Drake , Your best bet would be try to add something that is Capable of Pinging within the network. You can then Ping each IP address to see if there is communication. Please make sure that the IP address of the Pixel Driver and the Controller are in the same range. If you have a PC, DMX Workshop is a great tool to have.
Member

tool

Topic

Rayzor 760 Firmware Updates

elationservice ·
Uploader Tool Required: E-Loader Rayzor 760 Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Reply

Re: SixBar 500 Firmware

elationservice ·
UPDATED LINK TO NEWEST FIRMWARE.
Reply

Re: SixBar 500 Firmware

Youri Gidding ·
any release notes or list of changes available?
Topic

SixBar 500 Firmware

elationservice ·
Uploader Tool Needed: C-Loader SixBar 500 Firmware V1.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

ACL Bar 360 Fixture Firmware

elationservice ·
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

DTW Bar 1000 Fixture Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader DTW Bar 1000 Firmware V1.13 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Wash Z350 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Wash Z350 Firmware V2.1.11 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

ACL Series Fixture Firmware

Zach.S ·
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 ACL 360 Matrix Fixture Firmware V1.18 ACL Bar Fixture Firmware V1.0.7 ACL Curtain Fixture Firmware V1.12 ACL Roller 360 Fixture Firmware V1.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can...
Topic

Cuepix Panel Fixture Update Instructions

Zach.S ·
Necessary upload tool: CUE Software Uploader Cuepix Panel Fixture Update Instructions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Fuze Par Z60IP Firmware V1.07

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

ZCL Bar Z 300IP Firmware

elationservice ·
Upload tool: C-Loader ZCL Bar Z 300IP Firmware V1.03 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...
Topic

Six Par Z19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Six Par Z19IP Firmware V 1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

DW Par Z19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick DW Par Z19IP Firmware V1.06 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
Topic

CUEPIX Panel Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader CUEPIX Panel Firmware V1.20 What's new: Changed the term Master/Slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic

Dartz 360 firmware Updates

elationservice ·
Upload tool: C-Loader Software Uploader Dartz 360 Firmware V1.2.17 What's New: Changed menu wording from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic

Paladin Cube Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Cube Firmware V1.04 What's New: changed menu wording from Master/Slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

ACL Par 200 & 200IP Firmware

elationservice ·
Upload tool: C-Loader or USB Stick ACL Par 200 Firmware V1.08 ACL Par 200 IP Firmware V1.03 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Topic

Cuepix Series Fixture Firmware

elationservice ·
Cuepix Batten Fixture Firmware V1.10 What's new: Improvements to the strobe timing. Cuepix Panel V1.18 What's new: Improved RDM information when using on a MA2 controller the RDM light will also flash. (More Cuepix series firmware coming soon) You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader...
Post
×
×
×
×