Skip to main content

Tagged With "Software Uploader"

Everything
Topic

Show Designer 2 Com port Fixture upload problems

pacosound ·
Dear Elation crew, I have a brand new Elation Show Designer which I want to upload some fixtures like Chauvet, Martin, ADJ by using a Null modem cable. I use this cable to upload new firmware for my Nexo amplifiers so I know this cable is working fine. But when I connect the cable (which is USB to Serial) and upload the fixtures profiles with SD Back Up tool, nothing happens on the Show Designer and the PC keeps telling it's uploading... It seems endless!!! What do I do wrong? Is this...
Topic

Power Spot 250 homing issues

krclighting ·
Hi all! I've recently picked up 6 power spot 250's (for a heck of a deal, might I say). Four of them were great, one was having a lamp striking issue that I've been able to fix. I'm down to my last fixture issue. When you power on this fixture (lamp off but case open) the gobo and color wheels spin as usual to find their home spot. The gobo wheel seems to be having a problem finding its home. The fixture will get into its home position as if everything is ready to go, but the gobo's...
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Hybrid Fixture Firmware

Zach.S ·
Upload tool: E Loader III Proteus Hybrid_V1.6.4 Final Only for V1.6.X units Proteus Hybrid_V1.5.3 Final Only for V1.5.X units Proteus Hybrid_V1.4.3 Final Only for V1.4.X units You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for...
Topic

DMX Duo - *.dat file

kbrown ·
Does anyone have information on the dat files? Are these ASCII based files? We currently have all our equipment in the field and do not have access to a component that can spit out DMX for us to record. The only thing I can think of is to manually create a dat file to upload through the RS232 port. Thanks!!
Topic

DMX Operator Pro question

jj ·
I have a DMX Operator Pro and I was wondering if anybody knew of a program that would allow me to program my scenes and chases on my computer and then upload that to the Opertor Pro and save it that way instead of manually programming with the board. I don't want to carry a computer with me to a show but I would like to be able to program on the PC and upload it to the board or save it to the flash card. Basically another way to look at it is like Line 6 Software. Guitarist can tweak and...
Topic

Martin SCX600 help

bige ·
I need to find the download for this light so I can upload the SCX500 to our new Showcase designer3
Topic

HELP! Crashed the Magic 260 trying to install profiles.

audiopyle ·
I wanted to install a profile for Colorado1, so contacted ADJ. Joel Chen sent me "FullFixttureFiles090408.wcn" to install on the Magic 260. I installed the Uploader program v1.09 and the U-Link driver onto a friends computer, followed directions for loading the file. As soon as the upload started, the Magic 260 display read "file error". Apparently it wiped all of the profiles out, becuase there are now NO fixtures available in the controller, and I am unable to load any using the uploader.
Topic

X-move profile for magic 260 not working

ltraven ·
Hi there i just tried to create my own profile for the X-move with the 260 software and everytime i go to upload it, it either says file error or my board just locks up havin me to turn it right off to do anything with it..if anyone has a proper profile for the x-move or can give me a hand would be much appreciated
Topic

Can I controll my Compu 2048 FC+ with a Showdesginer 2cf?

misebeam ·
Hello, I have been using a show designer 2cf for the past year for our shows. Is there a way to use the show designer 2 as "finger controls" to break out buttons, and faders for my new compu 2048 fc+? Also is there an easy way to "upload" my current scenes from the show designer 2cf to the compu?
Topic

Problems with 260

william ·
I am new to using the magic 260. I was trying to upload profiles for ADJ Vizi Wash movers. The result was that when I hit the Fixture button, the whole board lights up and will not let me do anything with the board.
Topic

Magic260Rev1.20: "Run-time error: '5'

joggl ·
Hi everyone! i am trying to create some fixture profiles on the magic 260. what i have is some of these: * adj MegaPanel LED * adj MegaBar 50 RGB * adj 64P LED PRO * adj REVO Sweep * adj Quad Gem DMX as i could not find presets for all of them on the website and tried to create them on my own. now i spent about one day and the software drives me crazy. i tried 3 different PCs (win7 x64, winxp prof, winxp home) with a fresh fixture edit, whenever i change a channel name (e.g. to 'Dimmer') and...
Topic

Looking for some .ssl files **Admin please read**

chromifier ·
Hi, I need a few .ssl files for my library because I cannot locate them. The lights are: Elation Opti Quad Par, Elation E-Led Zoom, Elation Opti Tri Par, and Source 4 Jr. If any of you guys can upload those for me that would be great.
Topic

Latest emulation releases.

Jingles8302 ·
Hey guy's a lot of our staff is out doing trade shows but i have the latest releases for emulation for windows and mac. Here is the change log with links to download from yousendit.com for mac and windows. New Features : - Windows 64 bit device driver for the CueCable - click on clock to switch from 12h and 24h mode - Playback faderstart - Stacklist will save Cuelists' intensity levels - improved support for the Midicon Solved Bugs : - Chase could keep sending out values after it was...
Topic

need your help ASAP!

hansman ·
was going to upload my magic 260....... in was in the process of uploading, after my son pull out the plug!its coming on but the screen is jus blank......... i need this up and runnin again? what to do ASAP!
Topic

AlsoSuite2-BC interface not recognized

ddorling ·
My interface isn't recognized any more. USB Suite2-BC I was running Compu Show, the June 7 release, and everything was working fine. I had an issue with the behavior of the size control for the Page Buttons and thought I'd try the latest beta Nov 29. The interface wasn't recognized and so I uploaded the firmware included in the beta version through the TOOLS program as suggested by the message. The interface was recognized by the TOOLS program and I hit the Load FIRMWARE as it did and...
Topic

loading scenes and shows from on 260 to another 260?

parker ·
Hello, I now have two magic 260's and want to get them to have the identical scenes and shows. I did load my latest fixture file into the 2nd 260 and matched the fixtures to the same function buttons. I have uploaded a memory file from the 1st 260 to my PC but, when I try to download that memory file to the 2nd 260, I get an error message and actually corrupts the fixture/function button settings. One thing to note is that the firmware on the 1st 260 is 1.07 while the 2nd is at 1.05. Am I...
Topic

File Error

joec29 ·
Hey Everyone, Joel made me some profiles for my M260, but when I try to upload it, the controller says File Error. I did exactly as the manual says, but still no luck. If anyone has any ideas on what I'm doing wrong, I'd appreciate the help. Thanks!
Topic

Please help-need profiles

fields ·
Hello, I want to say thanks in advance for any help I could get with this... I have a very short time to program my lights (before I bought the controller, it was my impression that it would be easy to find profiles online, but now my time is running out) I did email Joel last night, but haven't heard back so perhaps he is out today. I listed my fixtures and their manuals below. Does anyone know: -if I can find these profiles online? -or if there is a guide somewhere on how to create...
Topic

Compu Cue Basic Interface Firmware 1.04

speedy ·
Our company has about two dozen compu live interfaces, ranging from the 1024 EC to the newer Compu Cue Basic interfaces... We're married to Compu Live at the moment, but I'm having a problem updating the firmware on two of these interfaces (both Compu Cue Basic) ones. They are currently loaded with 1.07 version. The Firmware upload button is trying to write 1.03, but it fails each time. I noticed with the interfaces that work, they have version 1.04. How can I go about getting 1.04? When I...
Topic

Magic 260 Profiles Needed

chrisburkley ·
I am trying to update fixture profiles for the Magic 260. The Lights I am trying to update are: Chauvet Colorband Pix (7 Channel Version) Chauvet LED Par 56-24 (7 Channel Version) Chauvet Par 64-36 VW (4 Channel) Do you also have a profile for a basic 4 channel dimmer pack? I am also wanting to upload these lights to the board using Mac OSX. Can you send instructions for the upload? Thanks! Chris
Topic

DMX Duo & PC connecting and creating shows

antho1965 ·
Hello I am brand new to DMX and literally know nothing. I bought a P36 package that has a DMX Duo (American DJ) and I have a serial cable connecing it to my PC. I have the RS232 software and it seems to connect... My problem is how do I create shows to add to my DMX Duo? Without a controller connected to the Duo how do i edit the existing pre packaged shows? I am only looking for very simple shows to add....are there any existing shows I can add? I don't understand what the RS232 software is...
Reply

Re: CompuPro and Accu Spot 250 II

schadow ·
Cool, that worked for me too. I'll test it with my actual lights and make sure it does what its supposed to. When I finish the profile for this fixture to work with 9 DMX channels is there a way I can upload it for all to use?
Reply

Re: Magic 260 with hickups

frankschlender ·
Sergio, thx, but no cigar. The question still lingers. HOW are the channel names in the uploader program beeing created? The user only can change the channel names in the Channel Information Window when setting up a fixture. THIS order of Channel Names - given by the user - gets garbled in the upload and is beeing magically transformed into the listorder in the EditChBName - Form, which has no function at all, it seems. Except driving me nuts.
Reply

Re: HELP! Crashed the Magic 260 trying to install profiles.

audiopyle ·
Hmmm. Did it again as "fixture" upload and it took. I guess I will figure it all out eventually.
Reply

Re: Opti Tri Par

Jingles8302 ·
no polish option LED read out looks good il see I'll I see if I can snap a pic or two tomm. But won't be able to upload the pics till Sunday. Sincerely,
Reply

Re: DMX Dimmer/Relay Pack question

jeffjams ·
:ey thanks a million for your help in resolving this issue I'm kinda new to dmx and learning as I go. I'm still trying to upload the video and that should kinda tell you more. I'm also thinking if - had the par 64 seperaty per channel to see if that might work. Well see
Reply

Re: Display Color of Buttons

Jingles8302 ·
matchless we all can upload photos to the forums. Just simply host them off site like on photobucket. www.photobucket.com its not just the elation people. BTW. i am looking into the color of the buttons question ill keep you posted. Sincerely,
Reply

Re: magic 260

denman ·
Sorry for the late reply, but I had to work all weekend. I have both, the original disk that was included with the unit, and also I downloaded the same program from Elations website(U-link software v 1.09) I have read the manual on how to upload the fixture profile but for some reason nothing seems to work. All I get is a message that reads "file error". I wonder if first, I have to re-load the firmware in order for it to work. Note: The original problem is, Magic 260 crashed on its own. I...
Reply

Re: Configuration SD3

elationpro ·
Hi Audio pip. A few things to start you off. simple flash will not work if you are not using a profile. you have to upload a full version profile simple flash feature works. You can control X/Y from jog wheels, joy stick or flex faders. however if you use Flex faders for X/Y control then you can not use flex faders for conventional. You can select 3 flex fader models. 1. fixture channels 2. conventional dimmers 3. More Play backs. If you want to use Flex faders for conventionals then you...
Reply

Re: need 2 profiles please

Jingles8302 ·
no problem. Again sorry for forgetting to send that one. I was more focused on making the new profiles. sonic you should really join my shared folder on mydropbox.com you can have access to all my elation and adj and etc files 24/7 and get updates as soon as i upload them.
Reply

Re: DMX Operator 192 fade-time issue on tilt-channel

droiddk ·
I have upload a video of the faulty movement here: http://www.youtube.com/watch?v=Tefz7KYm-8Q
Reply

Re: Personality Lists

danash ·
Hi James, Thank you for providing the personality profiles for the lights. Unfortunately I am still learning how to construct shows etc and did not have everything working as it should for an important event last weekend. However, I have now attached my Martin Wizard and it would appear that not all of the functions work correctly the barrel rotation does not work. I have hecked the jumpers in the unit and am able to confirm the jumpers are correctly set. Could you please revisit the profile...
Reply

Re: Firmware lost !! Magic 260 NEED Help

studio42 ·
In such situations, and as much as Elation Support DOES read this forum, this is a situation where you just gotta pick up the phone and call them up. Suggestion for ALL: Whenever doing a firmware upgrade, please have as much as possible the following options: 1: UPS battery back-up for all involved elements, generator or other hot-switching solutions to ensure no disruption in power. Read the instructions TWICE before even trying a firmware update. First read: familiarize Second read: Take...
Reply

Re: How Do I Lock Movers for SPOTS on the SD3...

plusvibes ·
Ken I hear ya. I just don't have the time (or access to the club) to create my own scenes & chases so I constantly feel like I am using someone else's pre-sets and just "pushing buttons". Is there an easy way, maybe via the SD card, to create stuff at home then upload it to the SD3?
Reply

Re: Emulation Build 26 for Mac

Jingles8302 ·
Yes we are testing it before we upload. give us a day or so to test. Sincerely,
Reply

Re: Hello, Profile please.

tote ·
Compu Show Beta Oct 15 2010, Should i Use the one dated Sept 24 2010? I also tried to open it with Scan Library Editor and get " Cannot open Library:Bad SSL Format" Maybe the file was corrupted on the upload? Can you use the file if you download vs the original locally on your pc. Thanks Tony
Reply

Re: SD3 Profile

Jingles8302 ·
NewEarth, Here is the link to my Shared folder on dropbox. http://db.tt/6q9QkL you will find profiles in the folders named "Profiles for compu live and my dmx" and "Profiles for Art1024 and Compu Show" Grab the profiles you need anytime day or night 24/7/365 I upload profiles as i make them. If you need one made let me know. also these profiles are just for the above mentioned programs these will not work on the SD Series consoles or any other program/console. Just letting you know. Sincerely,
Reply

Re: Moving head ACME Genesis move 50 profile

ce2000 ·
Compu live 1024 EC and for the fixture pdf i can't upload anything??? i do have them
Reply

Re: Stage Ape Hampster n DP415 n Colorverge

Jingles8302 ·
ah right the guys from cheap lights do the profiles. Been awhile since I talked to them. got confused. If you wanna try a profile for that led 86, Let me know. it is a simple easy profile would take me 5 mins to make and upload and post the link. no joke. Sincerely,
Reply

Re: Profile for Martin Roboscan 1220 CMYR

angel ·
No, please send the steps to upload on a Mac Thank you
Reply

Re: compu live update now available!

elationpro ·
Hi Steve, So there was an issue with a chinese bootleg somewhere, and thus created an anoying lock out for the English version.. This is going to be corrected soon and we will have a better upload on the website in a few days. However anybody using an chinese version of XP will still have this problem. Best regards,
Reply

Re: Profile Issue with ProPar56 CWWW

Jingles8302 ·
Seems to be a bit of a profile bug or error. The first color temp macro on channel 3 somehow was specified as the default preset which is directly linked to the ON and any preset switches that show up in the program. I can fix this and upload it and you can replace it on yours and I am hopeful haha that if you simply try the re-generate pre-programmed switches function it should re generate the "ON" and not cause it to do that anymore. download this:...
Reply

Re: Blizzard F5

Jingles8302 ·
upload the Blizzard Lighting XML file and I will take a look at it. Been a while since I've done an emulation profile. Sincerely,
Reply

Re: Firmware version 1.09

rockinlighting ·
I asked the same question about a month ago and no one ever answered me. I called and they told me it was about $100 to up day and would not tell me what it fixed or changed. now I just tried to upload a new profile to my Magic 260 and it locked up. I guess I have choice but to send it back and pay for it. It sucks because thats what I asked the question for to them for. now I will be without a board for a month.
Reply

Re: Compu 1024EC dongle with compushow

Former Member ·
what version do you have installed? it should give you a date when it starts up. and the profile that you are trying to upload, is it an SSl file? or an SSL2?
Reply

Re: Downloading/Saving Fixtures Magic 260

alwayslost ·
Thank you for the reply Sinaloakid. Unfortunately, I do not have the mff files containing the originally loaded fixtures shipped with the magic 260 controller. I was attempting to download the fixtures off the box into a compatible mff format; however, I can only download the memory and fixture set files as a whole. I was able to build a wcn file containing the new fixture I developed, but I do not have the additional fixture mff to upload as a set. Do you know of a way to download the...
Reply

Re: Downloading/Saving Fixtures Magic 260

alwayslost ·
Hi SonicNRG. I was able to get past the "Format Error" issue by selecting a channel label that existed in the default list. (ie.. Pan, Tilt, Red, Gobo) As for writing the file to the device, save the .wcn file and then execute the upload using the USB cable. Get the controller setup to receive the file and then send the wcn through the sync program they have. I would agree that the program needs some updating as it appears to be VB 6.0 (1990's). It has been about 6 months since I've messed...
Reply

Re: Sort Scenes on Master Page

philld ·
Is it possible to upload pictures to this site? I thought that had to be hosted elsewhere.
Reply

Re: Behringer Eurolight LD6230

ymbtxneil ·
I was able to upload your file and see the new manufacturers and models but it did not have the behringer profile. At least it proved it should work. Not sure why the export I create won't show models for the behringer though. Maybe doing something wrong in the builder?
Post
×
×
×
×