Tagged With "V1.14"

Reply

Re: Stupid Question but help

tylerherron ·
hey del. dude i am exactly like you I'm 14 years old and LOVE lighting. no rig yet but i have the software and love it(im farily good at it to if i say so myself). I'm going to try to make a vid sometime and post it here. see ya jthtiger
Reply

Re: Design 36 LED

Jingles8302 ·
oh ya i wanted to go but couldn't. ya have your guy ask for mikey g or jon lopez, they are both cool dudes and should help you out. also have ur guy take pics! supposed to be a BIG elation booth. tons of lights. at least 14 impression leds alone!! peace! jingles.
Reply

Re: Compu Live Question

partime ·
July 14, 2008 Help! I am sending this to 3 or 4 people I hope can help. I have installed a lighting system utilizing the following components: 1. – Acclaim s-fade6 at the entrance door 2. – Elation Compu -1024c 3. – an A-B switch 4. – Elation RMD620 Arc dimmer for house lights 5. – 6 Elation Pro Bar 4 – for an assortment of pars and ellipsoidals. 6. – 3 Elation RGB LED at various points in the path - They are addressed as 101, 108, 115 Problem: When the x-fade is operational it controls more...
Reply

Re: How to program the ADJ Mega Pixel on Magic 260

Jingles8302 ·
you know if you want the most control try a 14 channel mode or something towards the larger numbers but not more than 16. also look Here For a DMX 101 Guide Sincerely,
Reply

Re: DP-DMX20L dimmer ... is it 20A or 15A max?

serraava ·
That annoying right angle plug thing. I have chopped off and replugged/bent straight more of those things then I care to count. The only real reason why it is there is because people try and do stuff cheap aka use 14/3 and 16/3 instead of 12/3.
Reply

Re: Looking for Par64 Replacements, sort of

serraava ·
Well, the Opti RGB would probably be closer to a 300w Par 56 lamp. As for beam sizes of Par 64 lamps, they are roughly as follows: VN: 12 Degree N: 14 Degree M: 24 Degree W: 50 Degree Keep in mind they are rough numbers. Also remember that Medium and Wide lenses spread in an oval, not a circle. Here is a Cheat Chart for Par 64s. Granted, it is for 1000w, but the dimensions are the same for a 500w lamp.
Reply

Re: PRO BAR 4 Help

studio42 ·
Well, with a situation like yours where you are doing repairs anyways, I think the best way is how you originally approached this: ordering te correct part so you can install it. Really, if you're doing repairs anyways, you know what you're doing. I'd say contact Elation support via email or make a well timed phone call to Elation to speak to someone in support and order the correct part. They'd probably ship it in a day or two and you should get it within 10-14 days. I'm just basing this...
Reply

Re: Buggy MAC version

rayco ·
Well thats is obviously another BUG !!! The link in the 'Options' window reports 'New new version available' and the auto check function must not be working. Sorry to be a bit pernickety but at over £300 for a cable and a software download I did at least expect the software to be reasonably well settled and tested. I have even offered to beta test the Mac version, been using Macs since 1984 and I can break anything. Then all you have to do is speed up the turnaround on posting updates. Will...
Reply

Re: Buggy MAC version

rayco ·
OK, ten seconds of testing reveals (as I stated two weeks ago above) when you start program, FOG-STROBE-BLINDER buttons are latched ON. This was in C***** Build.13 as well and reported to them. still not fixed in Build.14 Will look at more after I put little one to bed.
Reply

Re: Buggy MAC version

rayco ·
Select any fixture and click 'copy' and it crashes. Nice if you hit that by accident at a concert with 6,000 people watching a live band as we will have this Saturday. Very expensive for the pleasure of being a tester. PS - Your link says Build.14 and the program says b.12 in 'About' box it says; 1.02.12 (1.02.9) I think this is build.12 not 14
Reply

Re: Need profile: Chauvet Q-SPOT 260 LED

impactdisco ·
Forgot to tell you that I need it on Advanced Mode (14 channels).. thanks again!!
Reply

Re: Buggy MAC version

rayco ·
It is updated now, still shows B.14 when I think it is only b.13 Auto update still does not work. Strobe etc. do not latch now but still crashes. Really not too impressed....
Reply

Re: Need profile: Chauvet Q-SPOT 260 LED

goa2222 ·
hello james. can you send this fixture profile to me as well? i just have 4 qspot 260led. also for advanced mode (14 channels) thks.
Reply

Re: DMX Operator 192 - software

litesnsirens ·
OK I have downloaded the software although I haven't yet hooked up my Operator 192. I am just trying it in demo mode. The light pars that I have are new, they are by Microh, you can't even see them on the website, although there is a similar system that is exactly like mine except different pars. I have checked the online manual for the system that they have online and it is exactly the same and works the same way. The system is the LED Quadpar. It consists of 4 pars on a single tree. The...
Reply

Re: Intimidator™ Scan LED and SD3 not working

jscott388 ·
I forgot to mention we have 4 elation design spots 250. They work perfect. So the board is working. Why they used 4 design spots and 14 chauvet leds is very odd, I would of got 4 more design spots which are brighter. lol So its most likely the dip switch 10 not being on.
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply

Re: fixture profiles request

Jingles8302 ·
Ok sorry for the delay. Here is the GLP xml: http://db.tt/medTeYN The model you will want to use is the impression RGB 10 or 14 channel mode. showtec xml: http://db.tt/FLqn3VK The model your looking for is the LED Par 64 Short 18X3W I'll try to get the midi con dimensions tonight. Just got to bust out my tape measure. Sincerely,
Reply

Re: A Little Help with Fixture Program

Jingles8302 ·
Jaime, my apologies about the delay in response. Yes I remember seeing this fixture before. It is quite weird. I had to modify a profile for another customer who has the same ones. He said he had to block the fixtures as a 14 channel fixture. Very strange. would you like some online screen sharing training on Tuesday or Wednesday of next week? I'd be more than happy to give you a tutorial or just help you sort out this profile. Let me know. Again sorry for the long gap in response. Sincerely,
Reply

Re: Profile needed for American DJ Vizi LED Spot

ccawthon ·
Ken, I downloaded the profile and took a look at it in the fixture editor and noticed the profile and the channel listing in the manual don't match up. They differ as follows... Chan. Vizi Spot Manual - Profile (from elation website) 1 Pan Movement 8bit - Pan Movement 8bit 2 Pan Movement Fine - Pan Movement Fine 3 Tilt Movement 8bit - Tilt Movement 8bit 4 Tilt Movement Fine - Tilt Movement Fine 5 Color Wheel - Color Wheel 6 Gobos - Gobos 7 Gobos Idx/Rot - Gobos Idx/Rot 8 Rot Prsm/Gobo Macro...
Reply

Re: Profile needed for American DJ Vizi LED Spot

sdman ·
The manual you have linked to at the top of this thread is for a 12 channel light that matches the profile. You must be looking at a differet light that is 14 channel.
Reply

Re: Profile needed for American DJ Vizi LED Spot

ccawthon ·
Oops, sorry, I found the URL but didn't check to see if it matched up with my light. Here is the correct manual with 14 channel option. ADJ Vizi Spot LED Pro
Reply

Re: Why can't I get the profiles from the web library

lightsout ·
Thanks a lot! So far it looks like everything I need. The 14 channel minspot (13 and 6 were easy to come by), scorpion storm rg, and others all seem to be there. I will check out the compu show later I do t have my lap top on me. I would really like to use it I hope I can get it to work. I did load it on my home pc also to make sure it wasn't a problem with the laptop but it does the same thing. Anyway, thanks again for your help, it is very appreciated!
Reply

Re: Profile needed for American DJ Vizi LED Spot

djtucci ·
hi,I am looking for a 14 channel profile for an ADJ Vizi LED Spot for a compu live 2006
Reply

Re: Magic 260 Controller Failure

fwclightmc ·
We have turned it off and that nothing for us. The display comes up normal but I can not go in and add fixtures or select scenes. When I go into the menu to select fixtures, I can get all the way to where you select the fixture with Wheel #2, but the wheel does not respond. Also, we knew something was wrong when used the main fader and nothing responded. I could tell the board was trying to communicate to the lights because when I shut the board off the digital display on the lights would...
Reply

Re: DMX Partner

djserventi ·
Thanks for you assistance. I purchased a DMX Operator to take care of my needs. I have read through the user manuel, and have two questions: 1. Can sound mode (Audio Bank)be activated before I set up any scenes? If not, what is the quickest way to use the DMX Operator for a show with the fixtures I have (please see initial thread) 2. Is is better to set each fixture on its own scene, then develop chase patterns, or is it better to set them up in banks and then develop chase patterns bank by...
Reply

Re: Need Profile Please

Jingles8302 ·
14 channel: https://www.dropbox.com/s/n2te...LED%20350%2014ch.ssl 8 channel: https://www.dropbox.com/s/ldoj...0LED%20350%208ch.ssl Sincerely,
Reply

Re: Profile needed

rc ·
Truwrshp, Your profile request has been submitted. I noticed that there is a 14 channel mode and a 16 channel mode each requiring it's own profile. Which one are you running it in? That way we can work on that profile first. Also where can I email it to once it's created? Rafael
Reply

Re: Profile needed

dj-luis ·
Is this what you need ? Or you need the manual? How can I send you the manual ? It can also be used in 24 channels too. 1-Pan 2-Tilt 3-Speed 4-Lamp on at 130.139 5-Colors 6-Nothing 7-Gobos 8-Rotacion Color wheel 9-Rotation Gobo Wheel. Fine set up 10-Prism 11-Rotacion Prism . Fine set up 12-Frost 65.255 Cierra el open gobo 13-Zoom 14-Focus 15-Strobe 16-Dimmer.
Reply

Re: Fixture Profile for Talent SSL1

midistud ·
14 Channel Profile
Topic

Seven Batten 14 Firmware

Zach.S ·
Upload tool: CUE Software Uploader or USB Stick Seven Batten 14_V3.0.3 Final You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

New profile for SD3

truwrshp ·
How do I get a fixture profile for a new one I have. I have attached the user manual. I want to use the 16 channel set up.
Topic

Blizzard HOTBOX exa Profiles

John Leonard ·
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic

Can Someone make these fixture profiles for the elation magic 260?

DJ Shaggy ·
v par pack 7 channel ultra bar 6 7 channel venue thintri 38 8 channel mini wash moving head 14 channel Thank you
Topic

Spot Briteq BT-Theatre 60FC Black LED theaterspot

Technican ·
Spot Briteq BT-Theatre 60FC Black LED theaterspot I have got an demo. The spot Briteq BT-Theatre 60FC Black LED theaterspot is very good. We want to buy 10 of them but without fixture we can’t use them with Emulation. Can you do the job? If we have the fixture, how can we update Emulation with teh fixture, Best regards, Deschamps Koen.
Topic

Artiste Monet Fixture Firmware

elationservice ·
Uploader Tool needed: None, fixture has a USB service port. Artiste Monet 1.3.4 & 1.4.1 Firmware Please ensure you read the included release notes document in the zip file. What's new: Mute Mode for fans via DMX control or menu. Please read the included Release notes that comes in the downloaded Zip file. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic

SixBar 500 Firmware

elationservice ·
Uploader Tool Needed: CUE Software Uploader SixBar 500 firmware V1.14 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

SixBar 1000 Firmware

elationservice ·
Uploader Tool Needed: CUE Software Uploader SixBar 1000 Firmware V1.18 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

KL4 Firmware

elationservice ·
Uploader Tool needed: C-Loader KL4 Fixture Firmware V1.08 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP Firmware

elationservice ·
Requires uploader tool: E-Loader. CW Profile HP Firmware V1.1.6 What's new: You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Artiste Van Gogh Fixture Firmware

elationservice ·
Uploader Tool needed: E-Loader III or USB Artiste Van Gogh Firmware V1.3.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

ZCL360i Fixture Firmware

elationservice ·
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Smarty Hybrid Firmware

elationservice ·
Upload Tool: E-Loader III/ USB Proteus Smarty Hybrid firmware V1.1.4 If your fixture does not include a USB Service Port which is used to upload software updates, click HERE to select the required uploader tool to update your fixture. Please contact firmware@elaitonlighting.com for further assistance.
Topic

Paladin Cube Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Cube V1.03 Firmware Fixed manual adjust reset issue. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Paladin Panel Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Panel Firmware V1.02 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Rayzor 760 V1.1.1

elationservice ·
Uploader Tool Required: Rayzor 760 Firmware V1.1.1 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Proteus Rayzor 760 Firmware V1.2.2

elationservice ·
Uploader Tool Required: Proteus Rayzor 760 Firmware V1.2.2 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Smarty Hybrid

elationservice ·
Upload tool: E-loader or fixture has a USB service port. Smarty Hybrid V1.2.6 What's new: See release notes included in download. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

Fuze Par Z60 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic

Artiste Picasso Fixture Firmware

elationservice ·
Upload tool: None, fixture has a USB service port. Artiste Picasso Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
 
Post
×
×
×
×