Skip to main content

Tagged With "Fixture Firmware"

Topic

Seven Par 7IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Seven Par 7IP Firmware V1.14 What's new: Improved thermal protection You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...
Topic

Fuze Par Z175 Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z175 Firmware V1.07 What's new: Improved thermal efficiency. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please...
Topic

CuePix Blinder WW2 & WW4 Firmware

elationservice ·
Upload tool: C-Loader or USB Stick CuePix Blinder WW2 Firmware V1.18 New: Resolved freezing issue when using RDM. CuePix Blinder WW4 Firmware V1.21 What's new: Changed menu text from Master/slave to Primary/Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so...
Topic

Fuze Wash Z350 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Wash Z350 Firmware V2.1.13 What's new: Software Updates due to change in processor/ not critical, only needed when replacing main PCB/ Backwards compatible/ same functionality as previous. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our...
Topic

Six Par Series Fixture Firmware

elationservice ·
Update Tool: CUE Software Uploader SIXPAR 100 V1.15 What's new: Software Updates due to change in processor/ not critical, only needed when replacing main PCB/ Backwards compatible/ same functionality as previous. SIXPAR 100IP V1.17 What's new: Update Required due to change in IC Chip, Backwards Compatible. SIXPAR 200 V1.15 What's new: Update Required due to change in IC Chip, Backwards Compatible. SIXPAR 200IP V1.20 What's new: Update Required due to change in IC Chip, Backwards Compatible.
Topic

Fixture Profiles for Chauvet Fixtures

Joe@arbc ·
Can we find Profiles for Emulation ver 1.4.3 for these ChauvetDJ Fixtures? 4 Bar Quad 6 Spot Colorband T3BT Geyser P5 we've attached manuals Thank you!!!
Reply

Re: Fixture Profiles for Chauvet Fixtures

Jingles8302 ·
Hi Joe, unfortuetly we have discontinued Emulation a few years ago. but if you email me I can tell you where to find the most up to date software version as well as profiles. James.keeley@elationlighting.com
Topic

Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)

Marky181 ·
Hi - I'm using a Martin M2GOHD - which I understand is now supported by Elation who market the controller as the NX2? I am seeking fixture profiles for a number of Martin fixtures: Martin ELP CL LED profile Martin Rush Par3 RGB Martin Rush Batten 1 Hex I can't find fixture profile downloads on the Elation webiste or anywhere else? Any pointers please on this would be greatly appreciated ASAP as I am on a very tight schedule to get the show programmed and would rather avoid having to create...
Reply

Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)

elationservice ·
Hi, try the obsidian website. It’s all in the 4.4 download. www.obsidiancontrol.com
Topic

Fuze Par Z120IP Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z120IP Firmware V1.16 What's new: Superseded IC Chips. (Not a critical update.) You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

Fuze Profile CW Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Fuze Profile CW Firmware V1.0.10 What's new: Improved cooling. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Reply

Re: Fuze Par Z60IP Firmware V1.07

Yuuji ·
Hi I have one trouble about FuzePar Z60IP Firmware Update. I updated my FuzePar Z60IP Firmware, original V.1.03 to latest V1.07. I did it with C-Loader2, and got it successful, and It showed V.1.07 on fixtures display. but I operate with my console, each time move colors(RGBW) encorders up and down, FusePar flash, I can't get exact level and smooth fade. without console, I tried by manual mode, it also happened same flash. I wonder what I should do next. Could you advice me how to deal with...
Reply

Re: Fuze Par Z60IP Firmware V1.07

ELA GINES ·
Greetings would you be able to send us a video?? if so please send to support at elation lighting dot com
Reply

Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)

Marky181 ·
Thank you so much for the swift reply - really appreciate it. The M2GOHD desk I have inheritted is running M-Series software 3.70.885.0 which as far as I can tell is the last M-Series OS version released? I am extremely nervous about trying to change this to Onyx at this stage. We are a community organisation and were donated the desk 'as is' and don't have the funds or the knowledge to start getting into OS upgrades.😕 On the Obsidian Control website (great tip thank you) however I did find...
Reply

Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)

Jingles8302 ·
Hi, all you need to do is place the .EXE installer onto a USB stick, plug it into the console and run the fixture library update from the settings menu on the console. You cannot import individual fixtures from the exe, you need to let it update the whole library. This is the way it has always been done.
Reply

Re: Fixture profiles for Martin LED units compatible with NX2 (M2GOHD)

Marky181 ·
Thank you so much - managed to get to the Fixture LIbrary update via the Tools menu and worked a treat! Really appreciate the swift advice! Thank you too for replying to my other post re. training - will give the FB group a try. Cheers,
Topic

KL Series Firmware

elationservice ·
Uploader Tool needed: C-Loader Or USB KL4 Fresnel Firmware 1.09 KL6 Fresnel Firmware V1.10 KL8 Fresnel Firmware V1.10 KL Panel Firmware V1.10 KL Panel Release notes: IC changes due to supply chain shortages. Please note units with V1.10 cannot be downgraded, however earlier units can be updated to V1.10, however this is not a critical update. KL8 FC Firmware V1.05 What's new: Superseded IC chip. (Not critical update) USB Update Instructions You should not attempt uploading the firmware to...
Reply

Re: Fuze Par Z60IP Firmware V1.07

Yuuji ·
I tried V1.06 on your web already, but it didn't improve. If you have older version of firmware, V1.05,V1.04,V1.03, send me somehow. V1.03 is original I'll try them one after another.
Reply

Re: KL Series Firmware

william 2 ·
Hello, I keep getting an Error when the second GSD file is uploading I already try updating it with the USB and with the C-Loader and I get the same problem please advice thanks in advance.
Topic

CuePix 16IP DTW Firmware

elationservice ·
Upload tool: C-Loader or USB Stick CuePix 16IP DTW V1.05 What's new: Changed 1U: change the STM32F103RCT6 to GD32F103RCT6 UPDATE NOT NEEDED/NON CRITICAL You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures.
Topic

Artiste Monet Fixture Firmware

elationservice ·
Uploader Tool needed: None, fixture has a USB service port. PLEASE NOTE THERE ARE 2 VERSIONS OF THIS UNIT V1.3.X & 1.4.X. 1.3.X SERIES CAN NOT BE UPDATED TO V1.4.X SERIES. FOR 1.4.X FIXTURES ONLY Artiste Monet Firmware V1.6.0 FOR 1.3.X FIXTURES ONLY Artiste Monet Firmware V1.3.7 Please ensure you read the included release notes document in the zip file. What's new: UPDATE NEEDED DUE TO IC SHORTAGE/CHANGES CORRECTED BUGS IN DISPLAY (IRREGULAR FAULT MESSAGES) OPTIMIZE RDM FUNCTION ADD...
Topic

Smarty Max Fixture Firmware

elationservice ·
Upload tool: E-loader or fixture has a USB service port. Smarty Max Firmware V1.5.0 What's new: 1. Update needed due to new IC (global shortages) 2. Fixes “phantom “ errors in display 3. Optimizes RDM functions 4. Adds Ethernet updating function 5. Unit will register ballast error after 10 failed Lamp strikes. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic

Fuze Profile Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Fuze Profile Firmware V1.0.15 What's new: Noncritical update due to IC change and global supply issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Reply

Re: Fuze Profile Fixture Firmware

Rainschn ·
Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded. Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.
Reply

Re: Fuze Profile Fixture Firmware

ELA GINES ·
make sure you are using a 2.0 usb. also where there any issues prior to the upload? any errors
Reply

Re: Fuze Profile Fixture Firmware

Rainschn ·
I'm using a USB Stick plugged into the lamp. No Hub. One of the lamps had the same error before the update. Now another one has that empty Module 6 to and the Zoom and Focus doesn't work either. The two other lamps are working well as before, after the update.
Reply

Re: Fuze Profile Fixture Firmware

ELA GINES ·
shoot me an email with your info.. gines dot gines at elation lighting dot com
Reply

Re: Fuze Profile Fixture Firmware

saul ·
hello, where can I find usb update manual?
Topic

Smarty Hybrid

elationservice ·
Upload tool: E-loader or fixture has a USB service port. Smart Hybrid Firmware V1.4.1 What's new: Added focus compensation function as well as optimization to the logic for detecting ballast malfunction. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the...
Topic

Adding EP4 nodes and need to move fixtures to new universe

defnotzoidberg ·
Hello all! I am adding 4 EP4 nodes into my venue's lighting system. we are using ONYX w/ a NX Touch controller. we are running out of DMX channels in our Universe 1. is there a way to move a group of fixtures in the patch section of ONYX to a 2nd Universe without having to individually re-patch every fixture into the new universe? thanks for any advice!
Reply

Re: Adding EP4 nodes and need to move fixtures to new universe

Jingles8302 ·
Hi, you can do this via the command line in the patch window, or drag to select the fixtures but by the universe column and once all are selected just type in the new universe number and it should move them all.
Topic

Proteus Maximus Firmware

elationservice ·
Upload Tool: E-Loader III (Required) Proteus Maximus Firmware V1.8.1 Update can be performed within V1.6.X,V1.7.X,V1.8.X range, but can NOT be downgraded to V1.6.X ,V1.7.X range. (Note: for V1.6.X update, need to remove convert PCB-PCB1187-0-B firstly, then do V1.7.X,V1.8.X update.) What's new: 1) Sun Protection updated 2) Hibernation Updated If your fixture does not include a USB Service Port which is used to upload software updates, click HERE to select the required uploader tool to update...
Topic

Artiste Mondrian Firmware

elationservice ·
Uploader Tool needed: E-Loader III or USB Artiste Mondrian Firmware V1.4.0 Update can be performed within V1.2.X,V1.3.X,V1.4.X range, but can NOT be downgraded to V1.2.X and V1.3.X range. what's new: Optimized RDM and Ethernet updating functions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader...
Topic

Artiste Rembrandt Fixture Firmware

elationservice ·
Upload tool: E-loader III or USB service port. Artiste Rembrandt Firmware V1.4.0 Update can be performed within V1.1.X, V1.2.X,V1.3.X,V1.4.X range, but can NOT be downgraded to V1.1.X, V1.2.X V1.3.X range. What's new: Corrected the multiple errors bug- shown irregular fault messages by display. Optimize RDM functions Added Ethernet updating function You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the...
Topic

Lighting Suppliers & Authorized Partners with Swarovski Lighting

Sussex Lighting ·
We have a large 2500 sq ft air conditioned lighting showroom in the heart of Horsham, West Sussex with free parking and are the biggest lighting retailer in the South of England. Also, we are authorized partners with swarovski lighting. We supply everything from light bulbs, home interior light fixtures, outdoor house light fixtures, lamps and lights to complete lighting solutions. https://www.sussexlighting.co.uk/
Topic

SixBar 1000 Firmware

elationservice ·
Uploader Tool Needed: CUE Software Uploader Six Bar 1000 Firmware V1.26 What's new: Resolved random turning off issue when using Artnet. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Topic

Colour Pendant Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader Colour Pendant Firmware V1.15 What's new: V1.15 25KHZ REFRESH RATE ADDED V1.14 UPDATED CPU V1.13 MASTER/SLAVE CHANGED TO PRIMARY/SECONDARY & HUE COLOR ORDER BUG SOLVED V1.10 DMX FLICKER ISSUE RESOLVED You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section...
Topic

Fuze Wash FR Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II or USB Fuze Wash FR Firmware V1.0.9 What's new: V1.0.9; DISPLAY BUG FIXED V1.0.8 INTERNAL OPTIMIZIATION V1.0.7 INTERNAL OPTIMIZATION You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Reply

Re: DTW Blinder 700IP Firmware

Stagehandxxx ·
So on this post, What is the current firmware version of the DTW 700, Elation webpage is 1.2.0, yet on this thread theres mention of 1.6 and 2.0.0. I am asking because I just got an replacement board, which say firmware 2.2.0 and after installing it, the fixture is not operating correctly. So I would like to confirm what the actual latest firmware of the DTW 700 actually is? Thanks
Topic

DTW Blinder 700IP Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader DTW Blinder 700IP firmware V1.2.0 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Reply

Re: DTW Blinder 700IP Firmware

Ricardo C. ·
V2.0.0 and V1.2.0 are the same version, but V1.2.x format was chosen as the new standard for naming software versions. Therefore, V2.0.0 format is no longer in use. The latest software is V1.2.3
Topic

First fixture in DMX chain keeps getting fried

TheJunctionCenter ·
We have been experiencing this problem ever since moving into this venue. If anyone has any insight we would greatly appreciate it. We have had an electrician come look and install a UPS in case this was a power surge issue but it is still happening. Our house lights are the color pendant series. We have a second, smaller room for other events that has newly installed sixpar 100's as the house lights. In the main room (with ther color pendants) the first fixture in the DMX chain continually...
Reply

Re: First fixture in DMX chain keeps getting fried

ELA GINES ·
Greetings, for sure you are getting an excess of voltage on the data line. also its not uncommon to have other PCB affected if a voltage related event occurs (collateral damage) long term. you may have to have an electrician use a scope VS just metering voltage, this may reveal some anomalies affecting your lights.
Topic

SixBar 1000 IP Fixture Firmware

elationservice ·
Update Tool: CUE Software Uploader SixBar 1000 IP Firmware V1.10 What's new: Components updated due to global shortages. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...
Reply

Re: DTW Blinder 700IP Firmware

jimval ·
hello, can you send me the last version of firmware DTW700IP please. jimmy.v18@gmail.com thanks
Topic

Elation Proteus Maximus not working with Avolites T3

cbot ·
I recently purchased the T3 and everything is working fine (with a few glitches due to pc software but that's to be expected). However, I am patched into 4 x Elation Proteus Maximus fixtures (extended mode) and they will not output at all. Pan and tilt work fine just no dimmer. I have checked everything. the personality is correct, the patch is correct, the mode is correct, and each attribute is open and full. The console is also directly hardwired to the fixtures with no data break from...
Reply

Re: Elation Proteus Maximus not working with Avolites T3

Jingles8302 ·
Hi, I just wanted to pop in and say that we are looking into this and will reply when we have some more info for you. Do you know what firmware version all of the Proteus fixtures are on?
Reply

Re: Elation Proteus Maximus not working with Avolites T3

Jingles8302 ·
Hi, sorry for the delay on this, but are you absolutely sure that all other non-intensity parameters are at their correct home value?
Topic

Artiste Davinci Fixture Firmware

elationservice ·
Upload tool: E Loader III Artiste Davinci Firmware V1.4.0 What's New: UPDATED IC’S DO TO GLOBAL SHORTAGES NEW DISPLAY MENU LAY OUT EHTERNET UPDATING FUNCTION CORRECT BUG DUE TO IRREGULAR FAULT MESSAGES VIA DISPLAY You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you...
Topic

CUEPIX 16IP Fixture Firmware Updates

elationservice ·
Upload tool: C-Loader or USB Stick CUEPIX 16IP Firmware V1.08 What's new: Internal Optimization/Network Delay Bug Resolved. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
×
×
×
×