Skip to main content

Tagged With "Firmware V1.05"

Everything
Reply

Re: Global Edit of Values for One Light + Right Click to Fade

ebaclights ·
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply

Re: HZ-300 concerns

studio42 ·
More updates. Just odd things. Sort of leading to a "ghost in the building" sort of thing. 1: OK, my day got way screwed. Depends how you look at things. I have to cancel a lot of things based on other things and then cancel more things based on still more things and now I gotta cram a lotta work into a little time because some dumb dink decided to hand off a project she didn't want to really work on in order to get lazy on something else. Just riddle me this: How the f*&$ am I supposed...
Reply

Re: Visualizer help

sasquatchproductions ·
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply

Re: SelfMade-Fixture for Eurolite TMH-10 and the Problems

dino ·
Actualy in Germany is 0:05 and the TMH-10-Fixture is working since 21:00 in Discothec-Work - and no Crash - while putting my fingers away from the Strobe- and Shutter-Function
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply

Re: need profile for High End Trackspot

dunn ·
v1 high resolution
Reply

Re: Setting dip switches

elationred ·
@billyboy, let me jump in. The DP-415 has dip switches based on the binary code standard. This means that each dip switch is double the value of the one before it. If you look at the image attached (DP-415 Dip Switch. will see the 10 dip switches and above it the values that each creates. Switches 1-9 can be combined in any configuration to create a number from 1-512. This will represent the starting slot (sometimes called an address) of the DMX signal that the pack will respond to. Because...
Topic

ZCL360i Fixture Firmware

elationservice ·
Uses: C-Loader II ZCL360i Firmware V1.05 What's new: Improvements to RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Rayzor 360Z Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Rayzor 360Z Firmware V2.0.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic

eNode 4 pre-sales support questions

Dave Nelson ·
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Needing two profiles to add to Emulation software.

Brown Note Tech ·
Needing profiles built for Chauvet Intimidator Spot 110 10 w and Blizzard Lighting Lazer Blade G. I have attached the manuals with the information. Any help would be greatly appriciated!
Topic

Easy View 3D: Meters vs. Feet

brianlollom ·
Ok, I've tried changing the Stage Settings units from meters to feet, which seems to work fine but only for the stage itself. Any objects I try adding still seem to be represented in meters. Any ideas? Thanks, -Brian Compu Show Build Date: 12/06/2013 Easy View Build Date: 12/05/2013 Easy View Version: 13.1205.0.347 Windows XP Pro SP2
Topic

e spot led vs e spot led II

ljraph ·
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic

Intermittent error 05, 06 & 07 DS 250

atlantadj ·
I keep getting intermittent error. When I brings the lights home, I get no error but at the show the fixture gives me 05, 06 & 07 error, I transport in the elation ATA dual case. I don't want to ship it n, because that alone is $100 round trip from Georgia, Also I have owner 6 of these fixture and error 5, 6 & 7 are the only errors I get ever get.
Topic

Rayzor Q7 & Q12 Zoom Fixture Firmware.

elationservice ·
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic Featured

Elation Fixture profiles for GrandMA2

elationservice ·
ACL 360 Bar ACL 360 Matrix ACL Bar Arena Par Zoom Artiste Dali Artiste Davinci Artiste Picasso Artiste Van Gogh Chorus Line 16 Colour Chorus Dartz 360 DTW Blinder 350IP DTW Blinder 700IP ELAR Quad Panel eMotion Fuze Par Z120 IP Fuze Wash 575 Fuze Wash Z120 Fuze Wash Z350 Level Q7 Paladin Platinum 1200 Wash Platinum BX Platinum FLX Platinum Profile LED Platinum SBX Platinum Seven Platinum Spot III Platinum Wash 16R Pro Platinum Wash ZFX Pro Proteus Beam Proteus Hybrid Protron 3K Color Protron...
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Showdesigner

jesper ·
Hi there, I´ve an old work horse, Showdesigner Rev 1.08 and are looking for some solutions and updates. I´ve downloaded SD Backup v.1.1 and shds214.txt. I soldered a nullmodemcable and i managed to create a memory dump from SD to the PC, but when I´m trying to send the shds.tex file to the SD i recieve a error in the display. "Errror 05 Repower and Retry" ????? What to do? Portspeed issue? Wrong wired cable? COM protocol? Any hints? regards from snowy Sweden /jesper
Topic

A silly question about polarity on a Show Designer 1.

bimmerboi77 ·
Dear Friends, I am attempting to integrate a July 05 version of the Show Designer One to work with (4) Martin 812 Roboscans (Vector Mode/7 Chn). The manual indicates that I need a polarity reversing cable to use a non-Martin controller with the Roboscans. My question is: Does the polarity switch on the back of the SD1 negate the need for a polarity reversing cable? ...if so what would the correct setting be for the Martin's?? -ALSO- If the polarity reverse switch were actuated, would I need...
Topic

Trackspot profiles

italiatib2k3 ·
Is there an updated profile for High End's Trackspots? V1 somewhat works, but V2 does not. (I use the 2006 version of Compuware with the blue interface). With the V1 profile, the Color and Gobo features are all screwed up. For example, Gobo #2, 3, 4, and 5 are all color scrolls, albeit different speeds. Same deal with Color. There's also about 6 or 7 different strobes--which turns out to be different flash rates. Why not just use a single strobe icon with an adjustment slider?
Topic

Compact flash or cf error #5

ldinnercircle ·
I got 2 of the same compact (CF) card to use with my SD3.. i have version 1.15 M3 this console is new. just installed here at our club in May, 2011 one card worked great when I formatted the card in just FAT, the other CF card was formatted the exact way but when inserted into my SD3 console it gives me a: CF #05 error CF format error both cards are 2 gig microcenter CF cards
Topic

Power Wash 575E problems

ingram ·
Good Evening, I bought 10 575E last july and now i am having problems with two of them. One do not tilt. The belt and gear assembly is ok, but it would not tilt. the code on the motor is: type: 23HS0001-05 W0135659 MOONS The other light, does all it's function, but the shutter is constantly stuttering, and it do not change colour. can some one offer me a solution? please note that i live in the caribbean, where customs charges are high on electronics, so shipping back to the plant is not...
Topic

New fixtures Eurolite

azymut ·
Can you send me the files for these two fixtures. Thank's Eurolite Led bar 324/10 RGB http://download.showtechnic.de...cuments/00039723.pdf Eurolite PST-9w RGB 1- Red 2- Green 3- Blue 4- Dimmer 5- Strobe (0)-on (01-05)-off (06-10)-on (11-255)-strobe
Topic

Three errors on a design spot 250

atlantadj ·
I had my wife buy this unit down in Florida and it had three error messages: 05, 06 & 07. Each error could have multiple causes. EG, error coder 05 "This message will appear after a fixture reset if the color wheel’s magneticindexing circuit malfunctions (sensor failed or magnet is missing) or there is a stepper motor failure (defective motor or a defective motor IC drive on the main PCB)." How do I isolate what the cause is for each? Thanks for your help.
Topic

Design Brick 70 II

wbrown ·
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic

Design Spot 250 multiple errors

coontasch ·
One of my original design spot 250's will run fine for a few minutes then starts having issues. It appears that the first thing to crap out is the shutter then everything but the pan and tilt. I can reset the fixture and everything will function again but only for a few minutes before the same errors occur. Eventually resetting the fixture does nothing and i get the following errors: 05, 06, 07, 08, 09, 10, 13. Any suggestions?
Topic

Crashing

x-laser ·
Hey all - Like the package a lot. However, as I have been playing around trying different things I have gotten several incidents of crashing. I will post them here as they occur. I am on Mac 10.6.5 using Emulation V. 1.03.15. I don't know how much you need so I just copied like half of it and if I should do less just let me know. Process: Emulation [5314] Path: /Applications/Emulation.app/Contents/MacOS/Emulation Identifier: com.VisualProductions.Emulation Version: Emulation version 1.03.15...
Topic

James Thomas Profile

d-lights28a ·
Jingles, Looking for a profile for an 11 channel James Thomas Pixal Par 44. http://www.pixelrange.com/pixe...ixelPar44-v1-58b.pdf Its the 11 channel 4+E option on the channel assignments part of the pdf. Need it for tonight if possible... Thanks, D
Topic

Design Spot 250 error

atlantadj ·
Hi, I am getting error 05, 06 & 07. Also during the channel test, nothing happens for channels 7 (gobo retation), channel 15 (scan speed) and channel 16 (Auto Program). For Channel 2 (pan high resolution) it only moves about 2 degrees and then resets and repeats. Same with Channel 4 (Tilt high resolution). What could be causing these error? IS it something I can fix myself? I have two other units I could borrow parts from to try and fix. Thanks for your help!
Reply

Re: help!! easyshow/laptop crash

serraava ·
Lol. I'll give you a hint on my aim screen name jingles, you have seen it before. Problem is, you can see and/or talk to me unless your on my buddy list. 21 here. I have been doing lighting professionally since sophomore year in high school, so about 5 years now. Started the 'big gigs' when I graduated in '05. One thing I have going for me is I look and act like a 30 year old, so no one questions me unless they find out my age.
Reply

Re: What's considered a lot of hours on Design Spot 250's?

serraava ·
You would be surprised then Esteban. I worked on Live 8 in Philly in the summer of '05. 80 Mac 2ks in the air, which was pointless because it was during the day. Unless they were all doing the same thing, you couldn't tell they were there. Anyway, we had a major storm blow through before the show, so bad that it wrecked a Stage Line at Campbell's Field across the river in Camden and canceled that show. We took down all 80 Mac 2ks and flipped them over and water literally poured out of them.
Reply

Re: External MIDI Trigger for BMP Rate

elationpro ·
Matchless.. see if you can wrap your head around this. 1. create scenes or switches with 1 color each 2. create cycle with each of the colors 3. change the time for each scene/switch to GO inside the cycle 4. now when you click PAGE-DOWN on your keyboard, you control the timing of the cycle 5. to assign this PAGE-DOWN control to MIDI, open the CONSOLE window 6. right-click on the MIDI controller button that you want to use (any button will work) 7. you will see a blank area with 4 icons to...
Reply

Re: How does everyone organize their scenes/switches/etc

davidpatton ·
thanks for the reply that's pretty much the direction I've been heading, as far as grouping compressed buttons for a song; there has to be an intent from Elation when this was designed, as far as how to group scene/switch for songs; James, do you know this??? as to the ordering, it goes a character at a time, so everything with a '1' in the first character get's grouped, then everything with a '2', and so forth; then the second character comes into play, so '1' then '10' then '11' etc to get...
Reply

Re: Configuration SD3

audio-pip ·
Ok, I have created an library file for my PHS-250 but i can´t load ist in to the SD3. "CF ERROR #05, CF format error" Here is my file: http://www.fileuploadx.de/944516 Please check it. The same happens if I will update Software form 1.12 to 1.13
Reply

Re: Design Brick 70 II

elationpro ·
all good questions.. will investigate.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated August 9th 2019 with new release.
Reply

Re: Satura Series Fixture Firmware

elationservice ·
Updated original post Nov. 11th, 2019 with V1.0.10
Reply

Re: Problem with eNode 8 Pro / sACN and ETC Gio Lighting Desk

Jingles8302 ·
Hi you need to update the Enode 8 PRO to firmware 2.8, attached is the user manual. you may need to email firmware@elationlighting.com to get the firmware.
Reply

Re: SixBar 500 Firmware

elationservice ·
UPDATED LINK TO NEWEST FIRMWARE.
Reply

Re: SixBar 500 Firmware

Youri Gidding ·
any release notes or list of changes available?
Topic

SixBar 500 Firmware

elationservice ·
Uploader Tool Needed: C-Loader SixBar 500 Firmware V1.15 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

ACL Bar 360 Fixture Firmware

elationservice ·
Upload tool: CUE Software Uploader ACL Bar 360 Fixture Firmware V1.28 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

DTW Bar 1000 Fixture Firmware

elationservice ·
Necessary upload tool: CUE Software Uploader DTW Bar 1000 Firmware V1.13 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60IP Firmware V1.07

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60IP FW V1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

ZCL Bar Z 300IP Firmware

elationservice ·
Upload tool: C-Loader ZCL Bar Z 300IP Firmware V1.03 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture...
Topic

Six Par Z19IP Fixture Firmware

elationservice ·
Upload tool: C-Loader or USB Stick Six Par Z19IP Firmware V 1.07 What's new: Changed the term Master/slave to Primary and Secondary. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see...
 
×
×
×
×