Skip to main content

Tagged With "Satura Profile Firmware V1.0.9"

Everything
Reply

Re: Crashing...Crashing...Crashing

washingtonlighting ·
Hello Again, Sorry for the long delay in getting back to you, the little down time I have had the last few weeks has gone to sleep and home...It has been non-stop on my end which has been great. I have some answers to questions you asked, a few new questions, and we will see from there. I have been able to use the compu some more with less problems, but more on that. I will email you crash reports after this post. For my fixture pages, everything is grouped in like lights, I have my design...
Reply

Re: DS 250 case

elationpro ·
that my friend is up to ADJ to help you out with on the ADJ forums :0) this is Elation forums and i have no way of figuring out where they hide their information. I just know it fits. Good luck.
Reply

Re: elation DP-DMX20L Channel Type Impossible

lightningstrike ·
Hey John, Thanx for the reply.... I've been a little side tracked .. 9 months!!! Maybe I wasn't clear..... I know how to operate the units but the problem I detail is just that... an issue with the units. Was asking if anyone knew a way to reset/diagnose/common issue with this model etc? Please advise. Thanx Will B
Reply

Re: Crashing...Crashing...Crashing

studio42 ·
OK, let me jump in. Issue 1: Emulation. No, not Elation's "Emulation" software, but rather emulating a PC on a Mac. Look, it SUCKS. Well, let me take it a step further: Emulating anything on anything else SUCKS. You know, you have BootCamp with your OS. I know you're not happy with Windows. But, why aren't you using Bootcamp and just having SUCCESS? It's one of those things where if you're going to insist on fighting, you're going to lose. Stop losing, start winning for a change. Take a day...
Reply

Re: Problem getting XMove LED to cycle lights, gobo, etc

sasquatchproductions ·
Sergio, After many headaches, my problem ended up being a fader issue. With the lights I am using, fader 5 controls the size of the shutter (open closed strobe, etc.) and fader 6 controls the dimmer 0-100. For the lights to work, fader 5 must be at 255 and fader 6 must then be up to 255. It basically took trial and error to get it goin but we are up and running now!!! Thanks for the help!!!
Reply

Re: another potentially simple question

Jingles8302 ·
you don;t need to make new groups. The mega bar pro is already grouped for you. Do you see the numbers 1-9 underneath panel 01? If you click on any of those 9 that is the section you can control. you can even group a bunch of sections together to respond to the same dmx commands. Make sense? If you want me too I will post a screen video. Let me know. Sincerely,
Reply

Re: Setup Korg Nanokontroller with CompuLive

genes ·
I was able to figure out the MIDI control needed to associate the fader on the NanoKontroller with the dimmer function of the light. I have not figured out how to get the color change of the LED light to work with the knob on the NanoKontroller yet. I have been totally frustrated by the lack on documentation on MIDI in Elation's manual. I am doing this totally by guess-work as I go. The manual says to use EasyControl, which did not come with my software and I cannot find on Elation's...
Reply

Re: How do I control the Pro Bar using MIDI?

Jingles8302 ·
Looking at the manual (thanks for the link) It goes by notes. 0-128. and you can assign any of those notes to a channel. I am still having someone else look into this. I appreciate your patience. Sincerely,
Reply

Re: CueCable drivers for Vista and Windows 7

loop ·
Hi James, Read through this. This is what is coming up in my C: Promt Microsoft Windows [Version 6.0.6002] Copyright (c) 2006 Microsoft Corporation. All rights reserved. C:\Windows\system32>cd \Program Files (x86)\Elation\Emulation1028\drivers\win64 C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>install.bat C:\Program Files (x86)\Elation\Emulation1028\drivers\win64>wdreg -inf windrvr6.i nf install WDREG utility v10.10. Build Sep 2 2009 09:43:37 Processing HWID *WINDRVR6...
Reply

Re: HZ-300 concerns

studio42 ·
More updates. Just odd things. Sort of leading to a "ghost in the building" sort of thing. 1: OK, my day got way screwed. Depends how you look at things. I have to cancel a lot of things based on other things and then cancel more things based on still more things and now I gotta cram a lotta work into a little time because some dumb dink decided to hand off a project she didn't want to really work on in order to get lazy on something else. Just riddle me this: How the f*&$ am I supposed...
Reply

Re: Help me Jingles! (its Rain)

rain ·
believe its the Colorado1 with white LEDs added. ch1 master dimmer ch2 red ch3 green ch4 blue ch5 white ch6 strobe all 0-255
Reply

Re: Addressing cans on Compuware

Jingles8302 ·
Your welcome Ben. Now I'll tell you the values of dip switches. Dip 1= 1 Dip 2= 2 Dip 3= 4 Dip 4= 8 Dip 5= 16 Dip 6= 32 Dip 7= 64 Dip 8= 128 Make sense? Sincerely, 9=256 9=
Reply

Re: Truss System parts wanted

elationpro ·
Hi Harper, Elation does not make truss yet.... ;0) if you are looking for our sister company Global Truss, you will need to contact them. you can call them or go to Global truss forum. http://forums.globaltruss.com/eve we don't moderate this. : (323) 415-6225
Reply

Re: Load fixture profiles to SD1?

rc ·
Joel, I checked out the DMX traits for this light. You can pretty much go with any LED type fixture or with any dimmer type fixture which is on there. In Modify A Fixture you really won't be able to get into detail as far as the individual traits on the DMX channels (for instance on channel 6 of the LED RAIN) but you will be able to set the number of DMX channels, rename it and assign the black out channel (channel 7) and value (0) etc. Let me know if you need further assistance. RC
Reply

Re: Help with powerspot 575 and Magic 260 board

pastorryang ·
Thanks. But the lights still randomly spin. They will change "scenes" when selected but will not go to any set location. If I set the pan to 0 they will stop. But as soon as I move even one click (say to 5) they begin to take off and rotate with no control. Any advice?
Reply

Re: Using NSI ND4600 with DMX Op Pro

elationpro ·
Hi Jack, DMX operator is compatible with all DMX dimmers. if the NSI dimmer is not DMX then you will need a converter. It may be 0-10v analog or MultiPlex (MPX). If is is Multi Plex (MPX) then you need to contact NSI for a converter. If it is 0-10V then we have a pretty cool item. check it out: http://www.elationlighting.com...gory=DMX%20Solutions
Reply

Re: Magic 260

hobson ·
Getting the fixture profiles installed on the M260 is a good start. Hopefully you chose profiles that used less than 16 DMX channels. If you profiles with a higher number of channels you will need to redo the installation with profiles with 16 or less channels. If you want to keep things simple for now, I'd suggest that you use a low - maybe even the lowest - number of channels for each fixture. You mentioned 20 fixtures and said you had others. The M260 can control up to 24 fixtures or 24...
Reply

Re: Magic 260

hobson ·
I was going on your statement: "I have downloaded the ADJ profiles and even installed that to the controller successfully." If you have done this, then use the profiles installed (not the x channel profiles). This is because the x channel profiles don't tell you what each of the knobs control. I'm a little surprised that you can get them all to turn on and turn off. How are you doing that? Are you just using the master fader? Please note that each fixture has it's own set of channel...
Reply

Re: Midicon does not Work! No Profile

washingtonlighting ·
Hey Jingles Thanks for the phone call, really thought we might get somewhere after it, but only have more bad news to report: 1. Why is program still opening as Sunlite Suite? I have uninstalled and reinstalled 2 times with June download, saved and then opened, and it never opens as Elation Compu like it used to. 2. Went into starting parameters to check midi settings as asked. Clicked reset midi. Waited...waited, whole laptop locked up! Ctrl.alt.delete did nothing, had to hard power...
Reply

Re: Visualizer help

sasquatchproductions ·
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply

Re: Visualizer help

sasquatchproductions ·
Yeah, its all color 1,2,etc. I don't know how to post screenshots but if you can enlighten me ill try. Also, is there a way to set the zero position so it automatically faces front. Example: when selecting the center switch, the lights all point to the back corner,not centered in front. All fixtures are set at 0 degrees but they obviously aren't. Does this make sense? Thanks! Ben
Reply

Re: BlueScreen after installing Cue-Cable-Driver :(

marco ·
??? I have a 32-bit system and can't install the 64-Bit drivers. Also I try to install it with dos-promt and wdreg, but this also runs on 64-bit. So the current situation is, that we have a chance by 0% to run it, paid a lot of money for it and can't return it. That's not good
Reply

Re: Stage Ape Library

djsingle ·
this is the information i found on the fixture. DMX mode: Part 1(single strobe) Turn just dip switch #1 on the first fixture to the "On" position. Connect the fixture to the DMX controller with a dmx cord. When the strobe is receiving a DMX signal the small green light to the left of the dip switches will be light up. Slider #1 controls speed Slider #2 controls intensity from dim to bright Slider #3 0-63 - A & B flash at the same time 63-147- Only strobe A flashes 128-191- Only strobe B...
Reply

Re: Generic moving head Fixture

Jingles8302 ·
Is there anyway you can tell us exact dmx values? For example channel 1 0-12 is say like gobo open etc? We will need much more specific values for all the channels in order to build a profile correctly for you. Also we will need some sort of name for this fixture. It can be anything. Even your name. What would you like us to call it? Welcome to the forums. Sincerely,
Reply

Re: Generic moving head Fixture

jarrell ·
Here is the break down Channel 1 = Beam 0-49 - no beam 50 - 99 full beam 100 - 129 fast strobe 130 - 159 slow strobe 160 - 255 no beam Channel 2 = Color 0 - 24 white 25 - 49 red 50 - 74 yellow 75 - 99 purple 100 - 124 - blue 125 - 149 - green 150 - 174 - dark blue 175 - 199 - deep purple 200 - 224 - color chase slow 225 - 249 - color chase faster 250 - 255 - color chase fastest Channel 3 - gobo 1 - 24 spot 25 - 49 spotted gobo 50 - 74 ninja star gobo 75 - 99 circle gobo 100 - 124 broken line...
Reply

Re: Midi Control

iguana ·
Savages, I did this the simple way. I created a scene with all the faders down at 0%. All channels are off, so all lights should be blacked out and at home.
Reply

Re: Midi Control

savages ·
I must be doing something wrong. I cannot get the switches to blackout. I created a new scene in the Master page. I turned off all the channels in the new scene, and set all the faders to 0. All of my pages are attached to the master page. Yet when I activate the newly created "blackout scene" any channel linked to a switch that is active stays on. Can anyone help me? I didn't think creating a blackout scene would be so difficult.
Reply

Re: Show designer 3, can faders come off?

sdman ·
Yes, the knobs just pull off. There are two big screws on the bottom that let you open the unit and a metal rod to hold the lid up. There are probably 9 screws holding the fader board in. If you post in the Show Designer section, you will get a faster response to questions, Thanks.
Reply

Re: Elation Stage Setter 8

surgeprotech ·
Reuben, The Stage Setter 8 has a fade function that affects the response of the individual sliders as well as the chase programs. You can enable this fade by going into 1x16 mode and adjusting the Y cross fader. Try reseting the fade delay to instant by bringing the Y fader all the way up to value 0, while in 1x16 mode. Let me know if this works
Reply

Re: Venue Issue

jarrell ·
Hey James thank you for everything. Our show tonight went off without a hitch. The only thing that I can bring attention to is when you turn on the emulation program for the first time to get full control of the Venue LEDs you have to max the dimmer, max a color, and then max out the strobe and bring the strobe back down to 0 to gain control over the LEDs. It works for now but thought you would find it interesting.
Reply

Re: SD Monitor Help

lazerdirector69 ·
IN ADDITION! I am using a DB-9 female to female gender changer to connect the adapter to the console as both ends are male. I would have thought this could not be an issue. Could be wrong.
Reply

Re: Venue Issue

jarrell ·
Hey James, There are a few problems still with the venue profile that do not allow me to control certain functions. When I boot emulation I do not have control over the Venue LEDs until I max the beam on every fixture and then strobe the fixtures to 255 to 0. After that process I can then control the fixtures. Also the second problem that I have run into is when I use the strobe global function. The LEDS will continue to strobe after I have stopped pressing the button. The only way that I...
Reply

Re: Midicon firmware update

studio42 ·
How long have you have this controller? You might have some options available. Not to slam Elation or any other company, but there has YET to be a product I've ever seen in a 1.0 release that hasn't had some sort of major issues. In fact, almost any release, especially a major release ending in a ".0" has had issues. This goes for Ascend, Cisco, Linksys, USRobotics, 3Com, UTStarcomm and many other products. Here's what I would do, assuming the rules in Belgium are similar to here: If you've...
Reply

Re: Co Pilot II Configuration

djchad72 ·
Also to clarify, here is the button to relay power pack mapping, I am assuming. button - power relay left - 1 - 1 left - 2 - 3 left - 3 - 5 left - 4 - 7 right - 9 - 1 right - 10 - 3 right - 11 - 5 right - 12 - 7 Again, thanks ahead of time for anyone who can help confim. Since my setup/test time will be right, would like to minimize the amount of re-planning I will have to do.
Reply

Re: PowerSpot 250 sheared pan stop bolt.

rrho170 ·
Would an error on the tilt motor (RSER)stop the manual dmx inputs from working? In manual dmx input mode, I am only able to set the value on the laser channel only, the rest will only change 1 step, usually from 255 to 0 or 254 but no where in between. Test function operates steppers correctly except tilt.
Reply

Re: Why can't I get the profiles from the web library

alomamedia ·
I am also having the same problem with the online library. We recently purchased the CompuShow SD controller and are running the most recent version of the software (June 8, 2010)and can't seem to access any of the files on the online library. We can see what is there, but when we click on a file, it goes back to the Scanlibrary (Step 1/9) page with nothing in the box for selecting a fixture. We are trying to access the file for the Elation Pro Platinum Spot 5R moving head fixtures. I was...
Reply

Re: SelfMade-Fixture for Eurolite TMH-10 and the Problems

Jingles8302 ·
Ok Great! Thank you. I'll modify your profile and then you can take a look at it. Sincerely, Translated to German: Ok Great! Danke. Ich werde Ihr Profil ändern und dann können Sie einen Blick auf sie zu nehmen. Mit freundlichen Grüßen,
Reply

Re: SelfMade-Fixture for Eurolite TMH-10 and the Problems

dino ·
Actualy in Germany is 0:05 and the TMH-10-Fixture is working since 21:00 in Discothec-Work - and no Crash - while putting my fingers away from the Strobe- and Shutter-Function
Reply

Re: SelfMade-Fixture for Eurolite TMH-10 and the Problems

Jingles8302 ·
Ich weiß nicht verstehen. Ich brauchte nur die gesamte EUROLITE. xml, um richtig zu laden Ihr Profil in der Baumeister-Programm. Ich bin kein Software-Programmierer und nicht wissen, XML. Sorry.
Reply

Re: DMX Address

hobson ·
OK, I found the manual for the Elation SDC-6 6 Channel Manual Dmx Controller. It is not particularly clear with respect to DMX, but here is my best guess at what it is saying. The SDC-6 says it adjusts values of 1~6 channels. I'm guessing that you can't adjust which six channels it controls, i.e., it only sends signals on channels 1 thru 6. That means you have to set the dip switches on the DP-415 to "listen" on those channels. Note that the DP-415 only handles 4 channels - so two of the...
Reply

Re: DMX Beginner 101 Question

hobson ·
First thing you need to do is run a DMX cable from the controller to a light, and another DMX cable from one light to the next. Ideally you would put a termintor in the open socket of the last light on the daisy chain, but with this small a rig, you may not need it. Next set you lights to workable DMX channels. If you want both Tri Phases to always do the same thing at the same time, set the Tri Phases in DMX mode and set their DMX channels to 1. [Note: you can't get them to act in...
Reply

Re: Want Simple On and Off for lights, How do I do it with my DMX Operator

studio42 ·
Well, you CAN do this, but you've got to create scenes that cover every possible scenario you'd want, and then have a chart documenting what's on for which scene. But on the go, that might be too much to deal with, as its too easy to overlook something. I'd say MyDMX by American DJ might be an option with or without a MIDI controller. It's a PC based software solution. While you can also make scenes you can name, you can also override the scenes using HTP or LTP to determine priorities. It's...
Reply

Re: Plat 5r 17 chan profile help

Jingles8302 ·
you don't really need to click the color snap button. the wheel should snap by default as that channel will have a dmx output of 0. Verify the channel value for the color snap and split channel and let me know. Sincerely,
Reply

Re: Plat 5r 17 chan profile help

cmb ·
Looking at the profile, channel 17 is 0-19 for color snap, 20 to 29 for split colors, and 30 to 39 for color gobo any. If I want the color to "snap" from white to yellow, I need to hit the snap button( 0-19) in my software program right?
Reply

Re: Plat 5r 17 chan profile help

Jingles8302 ·
Ok. Someone in our service dept will test probably Monday. Also but if channel 17 is at dmx value of 0 the colors and gobo's should all snap.
Reply

Re: Stage Pak 1

studio42 ·
Well, to start with, we have the Stage Setter 8 controller, which is nothing more than a 16 channel DMX controller. Then you have 2 DP415 dimmer packs, which are both 4 channel dimmer packs. Starting in with your Roller Trons, I'm assuming perhaps incorrectly that you have the Roller Tron 250's. But I could be wrong. These are 5-channel DMX fixtures. Channel 3 and Channel 4, value 255, is SOUND ACTIVE. So these support SOUND active, probably in a "per mode" bass. Channel 3 being sound active...
Reply

Re: Plat 5r 17 chan profile help

cmb ·
Lumidesk shows the dmx value for channel 17 to be 9 when the color snap is activated on the profile panel. Is that correct? or should it be 19?
Reply

Re: Plat 5r 17 chan profile help

cmb ·
well 9 is just the middle number between 0 and 19, which are the dmx value ranges for the color snap.
Reply

Re: Plat 5r 17 chan profile help

cmb ·
so does 9 represent the proper value for the snap? or should it be anything else between 0 and 19?
Reply

Re: Plat 5r 17 chan profile help

Jingles8302 ·
Should be anywhere between 0-19. 9 is probldblt the default dmx value. So it should snap. Sincerely,
×
×
×
×