Skip to main content

Tagged With "Paladin Cube V1.02 Firmware Features"

Everything
Reply

Re: Has anyone made a profile for Design spot 250 yet?

perfectmixsoundinc ·
Thanks, I was able to locate one dated -Thursday, July 20, 2006, 7:02:00 PM. So I think I ok, I need to load it and check it. But please go ahead and send what you have I would like to see if its the same thing. Perfectmixsound@yahoo.com Thanks again for your response!
Reply

Re: Global Edit of Values for One Light + Right Click to Fade

ebaclights ·
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply

Re: Coliseum Layout

hill ·
Thanks Jingles, You're a big help. I may take you up on those lessons. But I'll take a look at youre videos. They are quite interesting. They are great references for me. But in addition to that, Is it actually possible to make a "4D" room. i.e. A gym with a gable ceiling. Not like a cube room with a 'flat' ceiling. I think my church's gym would be a good starting point for me. Because it's a about a good 54'x75' foot room with a gable-shaped ceiling, Perfectly large for like a local...
Reply

Re: Crashing...Crashing...Crashing

washingtonlighting ·
Hey James Sorry in delay...weekend, and never ending something or other... I have no idea what the version was, as right before making this post I updated it. I have some crash reports in the 2006 folder on c drive, would that contain info? I would say that it had not been updated 6 month to a year. Here are usb dongles: Both Blue usb box Model: Compu Club 04 S/N: 4805495, 3306479 I also have an older grey dmx box that originally came with 02 software, but can't get that o sync with newer...
Reply

Re: Visualizer help

sasquatchproductions ·
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply

Re: deciding what to go with the sd3

elationpro ·
Hi NewEarth, SD Man replied this. Posted 24 January 2011 02:16 PM Hide Post The monitor software uses mouse control. I don't know if you can just duplicate a mouse with a touch screen. If the touch screen says it will work with any software and make it think the command is coming from a mouse then it will probably work. This is the extent of what you can do with SD3 and its monitor software. Compu is a different control system. you use Compu or SD3 but not both. they don't integrate. If you...
Reply

Re: SD3 - External Software?

jlivings ·
Posted 02 March 2011 09:59 AM Hide Post Sorry, I was asking about The Virtual Compu Live Software. I have a SD-2 and a laptop with windows 7 only. Regards, John
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply

Re: need profile for High End Trackspot

dunn ·
v1 high resolution
Topic

Color 5 and CW Current Firmwar

Frogger ·
Could someone please tell me the latest firmware/software for these units? Thanks
Topic

Need Profile Please

buddy ·
Hello, I need a profile made. Please help. I just updated Emulation on my PC Windows 7 lap top and erased one of the fixture profiles and I can seem to find it. Eternal Lighting Cube 5 RGBAW find user manual on this link... I need profile made by this Saturday, any help is appreciate it. Thanks
Topic

Vision scan 250 error codes

stonebridge ·
Hi all, I have 2 vision scan 250s. Both have one dead board. One is has a dead 250motor-01a and the other has a dead sc250pt-02. So I combined the working ones and everything works and turns on like normal then I start getting error codes 5-10. I have tried everything I can think of but nothing is working. I was wondering if there is something I could do or if you guys know anyway to clear them or fix them. Thanks, Kevin
Topic

Profile Needed

buddy ·
I apologize ahead of time if this is the wrong category to ask for a profile. I need a profile made for Cube 5 by Eternal Lighting. It is a RGBAW 5in1 Diode LED Wireless DMX and Battery Operated light. I have the manual if needed. Please advise.. Thank you in advance for your help.
Topic

e spot led vs e spot led II

ljraph ·
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic

Sniper 2R Firmware Upgrade

automaticfts ·
Can anyone tell me where to get my hands on an ACME IU-02 software upgrader? I'm trying to update the firmware on my Sniper 2R's (all different versions) and can't find this tool online, anywhere. Elation sent me the firmware files and instructions; which included using this device to update them. Thanks for any help!
Topic

Compu Live: What is the proper name?

soundstormnl ·
In the manual it is called Compu Live. In the product page of the website it is called Compu 1024EC, Compu 2048FC, Compu 2048FC+. At various internet stores it's been called Compu 02, 04 and 06, and Compu Club and Compu Pro. And I've seen references in this forum to Compu Pro 06 and Compuware and multiple variations of that. What is the proper name(s) and what are the differences? Thanks!!
Topic

Crashing...Crashing...Crashing

washingtonlighting ·
Hello I am new to this form, but not that new to elation products. I have been using Design Spot 250s for 3 years or so, and one forms of compu software for about 7 years, starting back on the 02 software. I then used the 04 software for many years, then 06, and now the current Compu Live. I use a mac book with 2ghz Intel Core 2 Duo with 4gb ram. I run parallels 3 with windows XP Pro, windows seeing 2gb of ram. I have been running this system for 2-3 years. Problems: 1. The problem I run...
Topic

Trackspot profiles

italiatib2k3 ·
Is there an updated profile for High End's Trackspots? V1 somewhat works, but V2 does not. (I use the 2006 version of Compuware with the blue interface). With the V1 profile, the Color and Gobo features are all screwed up. For example, Gobo #2, 3, 4, and 5 are all color scrolls, albeit different speeds. Same deal with Color. There's also about 6 or 7 different strobes--which turns out to be different flash rates. Why not just use a single strobe icon with an adjustment slider?
Topic

Hello, Profile please.

tote ·
This is for a Marathon Quad Derby MA-523. Thanks 1 channel 0--127 motor Position 128--191 Positive infinite rotation, from slow to fast 192--255 Reverse infinite rotation, from slow to fast 2 channel 1...255 Flash frequently from slow to fast 3 Channel 1...255 Red lasting lighted, from dark to bright 4 Channel 1...255 Green lasting lighted, from dark to bright 5 Channel 1...255 Blue lasting lighted, from dark to bright 6 channel 0--10 The effect from Ch1 to Ch5 11--33 AU 01 34--57 AU 02...
Topic

Design Brick 70 II

wbrown ·
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic

Compu 2002 software download

iuseoldstuff ·
I recently found a compu 02 USB to DMX Interface (club version). However, I cannot find where to download the software that will run it (not the drivers, but the actual software). Does anyone know where I could download it? I have tried the newer software versions and they do not work with it. Thanks.
Topic

Problems with SD1

twistlockrocks ·
Elation Professionals ... having problems with SD1. I recently upgraded (I think) to an SD1 from a DMX Operator Pro and am having some issues here. Problem #1: I cannot get this thing to update to 3.18. It is presently at 3.05 or something like that. Every time I try to update, I get an Error 02 message that says something about repower and retry, which, of course, I have done many times. This comes on immediately after pressing "send file". Com Ports are set the same. On the computer, you...
Topic

Color Key LED "Stage par 64" Profile needed

i8acatturd ·
Does anyone have a profile for "Color Key: Stage Par 64 10mm"? I have over 100 of these LED fixtures. My console is the Show Designer 3 I run the light in 6 channel mode The light is on this link: http://www.colorkeyled.com/products.php the Manual is here: http://www.colorkeyled.com/sup...02)%20-%20MANUAL.pdf Thank you very much for your time, Michael
Topic

Stage Setter 8 and ProBar 4

zenpublic ·
Recently, purchased the above mentioned - plugged in everything - but Stage Setter 8 doesn't light up. Yep, the power switch is on and I've tested the power supply - it's putting out juice. The pass through receptacles on the pro bar are hot but nothing else is working. Any help? We open a show on 02/15/2011 - that's Tuesday...help...
Topic

James Thomas Profile

d-lights28a ·
Jingles, Looking for a profile for an 11 channel James Thomas Pixal Par 44. http://www.pixelrange.com/pixe...ixelPar44-v1-58b.pdf Its the 11 channel 4+E option on the channel assignments part of the pdf. Need it for tonight if possible... Thanks, D
Reply

Re: Design Wash 250 and welcome back Elation...

steve ·
Here's my $.02 : There's no doubt there are better 250W moving heads, but they are going to cost a lot more. For example, the Robe ColorSpot 250 AT is really good. It has a tad bit more light output, quieter, but cost almost TWICE as much. The Martin MAC250 Entour is a better 250W fixture, but a new one will cost you $3,000.00. A better match in price is the Pearl River Pilot 250. This has another gobo wheel. I have never seen Pearl River lights. This light has a little less light output...
Reply

Re: Compu Live: What is the proper name?

elationpro ·
Hi Sounds, Cool pic! The software system is called Compu Live. However you have different option interfaces to run Compu Live. These vary in prices. Compu 02 - discontinued Compu 04 - discontinued Compu 06 - discontinued Compu 1024EC - $799.95 retail beginner sys Compu 2048FC - $1399.95 retial pro sys Compu 2048FC+ - $2199.95 retail pro plus sys I hope all this makes some sense. Best regards,
Reply

Re: External MIDI Trigger for BMP Rate

elationpro ·
Matchless.. see if you can wrap your head around this. 1. create scenes or switches with 1 color each 2. create cycle with each of the colors 3. change the time for each scene/switch to GO inside the cycle 4. now when you click PAGE-DOWN on your keyboard, you control the timing of the cycle 5. to assign this PAGE-DOWN control to MIDI, open the CONSOLE window 6. right-click on the MIDI controller button that you want to use (any button will work) 7. you will see a blank area with 4 icons to...
Reply

Re: How does everyone organize their scenes/switches/etc

davidpatton ·
thanks for the reply that's pretty much the direction I've been heading, as far as grouping compressed buttons for a song; there has to be an intent from Elation when this was designed, as far as how to group scene/switch for songs; James, do you know this??? as to the ordering, it goes a character at a time, so everything with a '1' in the first character get's grouped, then everything with a '2', and so forth; then the second character comes into play, so '1' then '10' then '11' etc to get...
Reply

Re: Grey Dongle

Jingles8302 ·
The gray one will ONLY work with the 02 software. As far as i am aware there is no upgrade option for compu to emulation. Sales would be better suited to tell you. Sincerely,
Reply

Re: Early SD2 Firmware Problem

stagewerx ·
OK Tried still getting "receiving new program" I did a memory read before update tried loading that and get "error 02" Also wondering Memory read was 170,915 bytes new the version 1.19 file I have is 65,520 is that correct or to short Thanx for your Reply! I Love Elation!!!
Reply

Re: Various questions (SD2)

sdman ·
I'm happy to see someone is using the monitor software. I have received 0 feedback over the years it's been out there so I assumed hardly anyone used it. It might be possible for me to modify the colors, I will have to look into that. For the MIDI commands, the CC messages now being used I think are much easier to enter than sysex. Just enter these three bytes: B0, page-1, scene-1. So for scene 3 on page 3 the CC message would be B0 02 02.
Reply

Re: Design Brick 70 II

elationpro ·
all good questions.. will investigate.
Reply

Re: Problem with eNode 8 Pro / sACN and ETC Gio Lighting Desk

Jingles8302 ·
Hi you need to update the Enode 8 PRO to firmware 2.8, attached is the user manual. you may need to email firmware@elationlighting.com to get the firmware.
Topic

Enode 4 Firmware

elationservice ·
Upload Tool: SNI Software Uploader eNode 4_V1.1 Only for V1.X units ENODE 4 V2.6 Firmware Only for V2.X units Enode update Instructions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Topic

Profile for Showtec Shark One scan

Peter Geluid ·
Hi i need a profile for a Showtec Shark scan for the emulation software (old) I added the manual Thanks in advance Peter
Topic

Paladin Firmware

elationservice ·
Upload tool: CUE Software Uploader Paladin V1.20 What's New: -Set C-Loader to SLOW!- Firmware version: V1.20 Firmware date: 31-01-2022 For Serial numbers: All Units NEW: - Messy display code bug solved - RDM addressing issue solved You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our...
Topic

Paladin Brick/Paladin Brick WMG Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Brick/ Brick WMG Firmware V1.07 What's New: -Set C-loader to SLOW!- Firmware version: V1.0.7 Firmware date: 22-08-2022 For Serial numbers: All units NEW: Optimized RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick...
Reply

Re: eNode 8 PRO Firmware (VERSION 1 ONLY)

ELA GINES ·
you have to determine via the menu/ software version, physically they are identical. if you have to replace the main pcb on an older unit (V1) the board will now be a V2. basically the update was needed due to end of life components.
Topic

Paladin Panel Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Panel Firmware V1.0.7 What's new: Fixed display code bug and resolved a RDM addressing issue. Power output optimized. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...
Topic

Paladin Cube Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Cube Firmware V1.0.9 What's New: RDM optimized/solved bug that caused a locked unit when RDM was used. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
×
×
×
×