Tagged With "Paladin Panel Firmware V1.02"

Reply

Re: Roller Rink Wash with LED?

Jingles8302 ·
mikey wassup man? long time no see huh? how ya been. ok down to business. i would look at the design led 36 moving heads and a bunch of octo strips. what is ur budget? also look at the ELED blinder and the design panel and also the trackpod 81. jingles! and how i would mount em is put the heads towards the center of the rink and line the outside with either strips or trackpod 81's. my opinion. jingles!
Reply

Re: Roller Rink Wash with LED?

eloader ·
Well...we do offer some LED fixtures now which have enough output to work in this type of environment - even IP 65 Rated - check out our Design Panel 72 - which has lumen output comparable to 250W discarge units in colors. Check it out... http://www.elationlighting.com/product.asp?ProductIDNum...9&cat=LED%20Lighting
Reply

Re: Has anyone made a profile for Design spot 250 yet?

perfectmixsoundinc ·
Thanks, I was able to locate one dated -Thursday, July 20, 2006, 7:02:00 PM. So I think I ok, I need to load it and check it. But please go ahead and send what you have I would like to see if its the same thing. Perfectmixsound@yahoo.com Thanks again for your response!
Reply

Re: Vision scan 250

mikepro ·
John thanks for the info but how do i access the gobo wheel . what panel do i remove. Thanks mike
Reply

Re: Power Distribution Help

esteban ·
whats up justin. the dimmer and power distro racks we use are from leprecon. what they have done is combine both into one. we have a connector for - 3hots, 2 neutrals, and a ground. and on the front panel there is a breaker for each hot, XYZ, most of the time we run in three phase but when we get to a venue with single phase we only use the XY breakers (two hots) and there is a forth breaker that combine XY to make Z. It makes it very convenient to take the same racks everywhere and not...
Reply

Re: design 108

bdunard ·
Thanks for the info. I am looking to add some wash fixtures to my new stage. I have truss with 6 Elation DLED 36's uplighting an Austrian sewn backdrop, I have added 6 of the new TriBrick LED's as eye candy on the rear truss. Now I just need to get rid of my Source 4's with color changers. I am keeping to S4's to light the singers up front but would like to add 2 to 3 LED wash fixtures on each tree to wash the band (9 piece band). I've been recommended everything. I would like to be in the...
Reply

Re: Compu Live Question

ebaclights ·
So the house dimmer is tied into the same line as the rest of the lights, and you have both the x-fade and compu controlling them with an a/b switch? You are saying all the lights work ok when controlling with compu, but when you switch it to the x-fade the leds go nuts? If so, they are probably losing dmx since the x-fade is only 6 channels. The only option you have is to set the leds so that when they lose dmx they do not go to auto mode. Finally, you can also add a wall panel from the...
Reply

Re: Global Edit of Values for One Light + Right Click to Fade

ebaclights ·
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply

Re: Compu Live Question

ebaclights ·
I understand what his problem was and I understand what you are saying. Yes, he did buy the incorrect wall controller for the job, but I seriously doubt he wants to drop another $500 dollars and be stuck with the x-fade still. That is why I recommend he build his own switch panel to work with the Easy Stand Alone box. Like I said it cost under $50, and can be put together in about an hour and works great!
Reply

Re: Compu Live Question

ebaclights ·
Ok, I found what I believe John is talking about. http://www.nicolaudie.com/main.php?id_page=28 It is the same list price that he stated. It does look nice but its still overkill from what I am talking about. It is a self contained wall mount DMX controller much like the AR-32. It can be programmed with the Easy Stand Alone software, and act as a dmx usb dongle for Sunlite/Compu. So basically it is like an Easy Stand Alone box in a fancy touch panel for the wall. I dont think you guys...
Reply

Re: Battery powered LED fixtures?

serraava ·
Elation actually makes a battery powered LED fixture called the Event Panel . Should be exactly what you are looking for. With regards as to how to make your own battery powered LEDs, it is something that shouldn't be discussed on open forum since someone can be seriously hurt or even worse, killed. If your not sure how to do it, don't do it. Not worth playing with your and others lives and well being. Even if you get an electrician to wire it, it still won't be UL, ETL, and/or CE approved.
Reply

Re: Newbie Question

petter ·
Hi again and thanks for the response. I will propose to use the "ELAR-DRIVER-8" for the project, but I have another question about the programming and control. I read that "ELAR-DRIVER-8" has compatibility with DMX 512. With this "ELAR-DRIVER-8", do I need to buy a DMX Operator or some Control Panel to do the programming and the change of color? or I have to use some kind of software to program this device and put on "Stand Alone Mode"? I will be waiting for your quick answer, thanks a lot...
Reply

Re: USB resetting

mu0p ·
Lol whoops, maybe it was "John" But im using windows xp sp3, and have the 2048FC and just downloaded the software from the website about 4 months ago. The first time it happened, I was in the back of the stage and my computer was ontop of a tough box which was being continuously rattled by the bass, and during the show, someone dropped one of my fixtures, which made the control panel of the unit(the dmx led panel) fall inside the fixture and thus making it not work correctly. thats whn the...
Reply

Re: Can't Get Light 2 to work! (DMX Operator Pro)

elationpro ·
Hi CJ, Here's what I recommend. Set the second panel exactly as the first panel. Address and all. They should do the exact same thing when you use the DMX operator pro. This is your starting point. When and if they do the same thing or not, then it sounds like anything would be an issue with your light. You should contact the manufacturer of the light which is Chuavet as this forum is only to support the Elation products. Once you get the Chauvet lights figured out and you have questions on...
Reply

Re: Audio Analysis

floodstage ·
I made sure audio was turned on. Click on controller, then drop down to starting parameters and select that. When the new window opens up, select the tab that says audio/midi and a new screen opens. Check the box that says: "this setting allows you to read audio from the sound card......" Click on the "OK" box. __________________________________________ Then I started from scratch. I created a new show I added pages (my fixtures) I set up a scene (all blue on all lights) I clicked the...
Reply

Re: cycles

ug2k ·
ok, i try to explain my problem with a sample. we got simple halogen bulbs witch are controled by a switchpack. its a panel of 5 high and 5 wide. now i make a szene to write a word with them. every step is a letter. if i write a word with ten letters and a hold time of each with one second i can set the time in the cycle at 10 seconds and it wll work. the whole word will be displayed with all letters and then the cycle step to the next szene. but when its triggered by the sound to light mode...
Reply

Re: Using Korg NanoControl

studio42 ·
I don't use CompuLive yet, but I do use MyDMX and the Korg nanoKONTROL. Let me share some experiences. Be aware that my experiences are MyDMX specific. My hardware is a MacBook Pro, the 17" with the upgraded screen, Mac OS X 10.5.8?(it's latest), BootCamp 2.1 and XP Home with SP3 on the PC boot(no emulation). 2 Gigs RAM, soon to be 4 Gigs. First, the Windows drivers for the Korg nano-series sucks. While the devices do not marry to a USB port, you may need to re-install the driver each time...
Reply

Re: Crashing...Crashing...Crashing

washingtonlighting ·
Hey James Sorry in delay...weekend, and never ending something or other... I have no idea what the version was, as right before making this post I updated it. I have some crash reports in the 2006 folder on c drive, would that contain info? I would say that it had not been updated 6 month to a year. Here are usb dongles: Both Blue usb box Model: Compu Club 04 S/N: 4805495, 3306479 I also have an older grey dmx box that originally came with 02 software, but can't get that o sync with newer...
Reply

Re: DP-DMX20L dimmer ... is it 20A or 15A max?

studio42 ·
20-amp only? That must be reserved for some specific bit of hardware, best I could guess. That would make more sense in a hospital. I've never seen a 20-amp only outlet, always the typical 15/20 that has the T on the neutral for "compatibility". One thing I do these days with new venues is I have one of those pen-type devices that can detect a live circuit. If I have a live circuit, next thing I do is meter it and document that on a per outlet basis. I've only run into 1 problem: an outlet...
Reply

Re: triger troubles

studio42 ·
Hmm, so I was right about the caps lock thing. Must be some Linux guys doing the programming, or at least using the Unix/Linux mindset(which I wish more users would follow). Thing of it this way though, now you've got effectively twice the number of triggers available, one set with the caps ON and one set with the caps OFF. That was a shot in the dark for me but something just trigged the "check the caps lock" suggestion. Since I use Linux for my web hosting platform, I have some familiarity...
Reply

Re: elation DP-DMX20L Channel Type Impossible

studio42 ·
Short of a wall panel full of Variacs, the days of the straight-wire-plus-gain days are pretty much lost and forgotten. Today, there's definately a lot of people, young AND old, who just won't make an effort at all and expect yelling and screaming on a web forum might get them the results they need. You're clearly not a member of this group. I thank you for that! These days, we're trying to find as many polite ways of saying "RTFM" without exactly resorting to that little phrase, although...
Reply

Re: LED fixture questions

studio42 ·
This is something odd, but I'll post it anways. I recently acquired 4 ADJ Mega Bar 50's, and 4 Mega Panels. The Mega Bars still provide a somewhat "round" beam, at least in distance. Close up they definately wash wide. I had a bit of a time focusing these at a recent event. The Mega Panels, despite being rectangular, do provide a relatively round "beam". Yes, I know these are wash fixtures, but when you end up with a soft circle on the surface, it's rather strange to me. I know, the LED's...
Reply

Re: another potentially simple question

Jingles8302 ·
you don;t need to make new groups. The mega bar pro is already grouped for you. Do you see the numbers 1-9 underneath panel 01? If you click on any of those 9 that is the section you can control. you can even group a bunch of sections together to respond to the same dmx commands. Make sense? If you want me too I will post a screen video. Let me know. Sincerely,
Reply

Re: another noob question.....

johnhrv ·
Sergio, I have an Scene Setter 24 ch connected to two ETC Smartpack wall mounted dimmer panels. SS24 outputs 1-12 go to 1st panel with 12 dimmers and outputs 13-18 to second panel with 6 dimmers. The SS24 outputs are in sequence but actual light wiring to dimmers is mixed. How can I assign sliders to match the phisical light configuration (as suggested in your remarks)? Or do I need to rewire the dimmer panels to match SS24 sliders? Johnhrv The existing
Reply

Re: another noob question.....

johnhrv ·
Sergio, Thanks for your reply. I am not at our church to check the DIPs but all 18 outputs are working now using DMX. No the slider channels have not been changed. BUT, that is what I want to try but cannot find instructions. Can you direct me to a source of instruction for changing slider output channels. My other option is to re-wire the ETC Smartpacks. My objective is to get the SS24 sliders in the same order as theater lighting fixtures (now mixed). johnhrv
Reply

Re: Event Panel wireless DMX?

Jingles8302 ·
Hey CodeBlue, Welcome to the forums. The event panel system does not feature built in wireless DMX receiver. It just has a Built in Ir receiver for the remote control. What wireless dmx equipment do you already own? If you already use our EWDMX-T you would simply need to add a EWDMX-R. Hope this information helps. If not please ask if you need more information. Sincerely,
Reply

Re: Event Panel wireless DMX?

serviceg ·
the Event panel has a built in Ir remote. it does not have wireless dmx. you will have to invest in a wireless dmx reciever. hope this helps. Best regards, Gines Gines Elation Service manager
Reply

Re: Visualizer help

sasquatchproductions ·
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply

Re: House lighting

studio42 ·
Just a bit of advice: At nearly any venue I've been in, assuming I am allowed to touch the house lights(and I prefer to have a house guy do that), it has ranged from flipping breakers off, banks of simple wall switches and/or dimmers or some sort of multi-panel/multi-location lghting control. At no time did the sound or light people touch house lights at least during a show. We had a house guy on clear com told to bring lights up/down. So, my suggestion to you is that if you want the...
Reply

Re: deciding what to go with the sd3

elationpro ·
Hi NewEarth, SD Man replied this. Posted 24 January 2011 02:16 PM Hide Post The monitor software uses mouse control. I don't know if you can just duplicate a mouse with a touch screen. If the touch screen says it will work with any software and make it think the command is coming from a mouse then it will probably work. This is the extent of what you can do with SD3 and its monitor software. Compu is a different control system. you use Compu or SD3 but not both. they don't integrate. If you...
Reply

Re: SD3 - External Software?

jlivings ·
Posted 02 March 2011 09:59 AM Hide Post Sorry, I was asking about The Virtual Compu Live Software. I have a SD-2 and a laptop with windows 7 only. Regards, John
Reply

Re: Want Simple On and Off for lights, How do I do it with my DMX Operator

studio42 ·
Well, you CAN do this, but you've got to create scenes that cover every possible scenario you'd want, and then have a chart documenting what's on for which scene. But on the go, that might be too much to deal with, as its too easy to overlook something. I'd say MyDMX by American DJ might be an option with or without a MIDI controller. It's a PC based software solution. While you can also make scenes you can name, you can also override the scenes using HTP or LTP to determine priorities. It's...
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply

Re: Plat 5r 17 chan profile help

cmb ·
Lumidesk shows the dmx value for channel 17 to be 9 when the color snap is activated on the profile panel. Is that correct? or should it be 19?
Reply

Re: AR-32C

nde ·
tried the drivers you sent me still no luck so decided to open up the control panel and found that the micro usb slot looks like its been replaced at some point in doing this thow they have damaged the track on another part of the pcb and tried repairing it badly so probably explained why none of the drivers seem to be working but thank you for your help it is really appreciated don’t suppose if you know if there is anywhere that i could get a replacement control panel from?
Reply

Re: Orientation of Moving Heads

studio42 ·
Sorry to hop in late. Wanted to lend some support. I have a pair of Chauvet Q-Spot 150's. I had to figure out how to orient them so that what I saw with MyDMX(now Compu show) would match what the lights are doing. It was a combination of orientation of the light(physical positioning) coupled with pan and tilt configuration on the fixture itself. One that was figured out, I CLEARLY marked and labelled BOTH lights to ensure proper orientation. Also, the light's configuration is clearly...
Reply

Re: need profile for High End Trackspot

dunn ·
v1 high resolution
Reply

Re: HZ500 DMX OUT

Jingles8302 ·
oh no it has DMX in and out. It just wouldn't make sense for anything that has DMX capability to have JUST DMX IN. In fact in the post you linked the 2nd picture of the control panel it is a bit blurry but you can make out "DMX in" and DMX out" right there on the picture. Sincerely,
Reply

Re: Does DMX 512 applicable for LED Screens based on RGB Pixels

Jingles8302 ·
One example going off of what Jeff said, ADJ has some LED panels. The Flash panels are DMX ran and have 16 "pixels" per panel. So each panel takes 48 dmx channels. You can run about 10 panels in one DMX universe. Take a look at the You Tube video on the product page: http://www.americandj.com/Prod...nId=2&Category=L.E.D . They are very low res and it would require many many panels and DMX universes to get a decent resolution out of them for even basic graphics. But the point of all this...
Reply

Re: Compu Show Taking control over Stic as well?

Former Member ·
since the stick and the compu cue are made by the same developer some functions can be controlled through the same software. not all but some. we usually recommend that you do not run multiple software on the same computer as this can cause problems. this might be one of them. the only solution would be to unplug one when using your software. if you are using compu show unplug the stick. if using the ART1024 software, unplug the stick panel from the computer.
Reply

Re: Show Designer 2

rpeterson ·
The stage lighting is ran through a Lightronics RD-82 dimmer pack. The house lighting is controlled by a Lightronics 400 cp Architectural lighting panel. Are the addresses for the lights set by these?
Reply

Re: Show Designer 2

sdman ·
I looked at the Lightronics page and I see the RD82 is an 8 channel dimmer and the CP400 is just a jack panel. The jack is probably connected to a dimmer pack somewhere. When you find out how the dimmers are set up, we can program the controller to match. Hope this helps.
Reply

Re: Show Designer 2

rpeterson ·
Ok, then I have got to do some wire tracing and see where the dimmer is for the house lights. It is not anywhere that I would have expected to see it, so that probably means it is hidden behind some wall or panel somewhere.
Reply

Re: Show Designer 2

sdman ·
You can try taking your sd2 over to that jack panel, plug in, and try out every dmx channel till you find what works. It might just be the first couple of channels. There should be a power switch somewhere that turns on the system. I would think they would have put all the dimmer racks in the same place.
Reply

Re: dip switch settings..

happyman1965 ·
Hi where do I set my dip switches so my control panel can work all 16 lights as I wish? I have 2 DP-415's and a stage setter 8
Reply

Re: Need to add light... Monoprice... 612745 to Emulation SW.

djalfa ·
Can someone please help, I need to add light. to control with Emulation: Brand of light: *MFL.* Features: Ultra bright,18pcs 15w High Brightness RGBWA 5-in-1 Led Lamps .Red, Green, Blue, White, Amber colors mixing Electronic Dimming: 0 - 100% Beam angle: 38 degrees 4-button, DMX digital display on rear panel Operational modes: Static Color Mode, Program Mode, Sound Active Mode and DMX Control, Master/Slave model. 5/9 channels Built-In Programs Static color, macro colors, strobe and strobe...
Topic

Cuepix Panel Fixture Update Instructions

Zach.S ·
Necessary upload tool: CUE Software Uploader Cuepix Panel Fixture Update Instructions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Enode 8 Fixture Firmware

Zach.S ·
Upload Tool: SNI Software Uploader eNode 8 PRO_V1.9 Only for V1.X units eNode 8 PRO_V2.4 Only for V2.X units Instructions for uploading Enodes You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...
Topic

Enode 4 Fixture Firmware

Zach.S ·
Upload Tool: SNI Software Uploader eNode 4_V1.8 Only for V1.X units eNode 4_V2.3 Only for V2.X units Enode update Instructions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your...
Topic

Dimmer noise - DP-DMX20L

joegardner ·
I've got a dozen older DP-DMX20L units that are sending noise back into the electrical system and ultimately showing up in the sound system. Goes quiet at 0, 50 & 100% and the closer to 25 & 75% the louder the hum. Is this simply inexpensive dimmers or should I be looking elsewhere? It should be noted that ALL audio signal cables are balanced XLR type, everything is powered from the same panel with the same ground (I know, I installed it.) I actually didn't have this issue when I...
 
Post
×
×
×
×