Tagged With "Firmware V1.1.3"
Reply
Re: RMD-620
Audia, I just saw this post.. are you still having issues? It sounds as if you need some DMX help over there. Using the fixture patch you should have the address of the fixture in the SD2 match the address of the dimmer.. If you not sure what the address is, the address is a 3 digit number that dimmer must have.. then a fixture button on the console should have the same 3 digit number. If these numbers don't match then you wont get any response. If you can't figure it out then we will need...
Reply
Re: DMX Duo
Not to rob Jingles of business, but I think it would be beneficial for you to just buy a small DMX controller that will allow YOU to program your own scenes and chases. For one, you will learn a lot about DMX lighting and how to accomplish many different things. Plus, you will be able to modify, remove, and add to your current banks of scenes and chases without having to rely on someone else providing designs for you. You will then know how it all works inside and out, plus have the...
Reply
Re: Re-initializate Magic 260
Try this.(from the manual)....It WILL ERASE EVERYTHING !!!Gfuller2000 Section 30: Erase All Memory The next set of instructions will allow for ALL programmed memory, including presets, scenes and shows, to be erased in one shot. (1) From the main screen, press and hold down the “DEL” button then press the “ENTER” button once. Your display will read as follows: Select a menu item then press enter. - Lock/Unlock Memory - (2) Turn DATA wheel #1 clockwise so that your display reads the...
Reply
Re: Is there a 250 spot that will mix color like this?
bdunard, Yes, a wash will be about from 40 brighter than a spot. You have a lot more light being projected along a bigger beam of light. However, that's all a wash fixture does.. color change.. but the beam of light it projects is impressive. Most rigs require a 1 to 1 ratio where you have 1 wash to every spot. So if you have 8 Spots you should also have 8 washes. But with the Frost filter of the Design Spot's it helps resolve not having to buy so many washes. Still the wash effect of a...
Reply
Re: Is there a 250 spot that will mix color like this?
The video is great. I didn't even know there was an fx editor. Looks like I should be able to do a alot with that. Of course I still have questions... 1. Once you create your effect, why do you go to easy time to save the scene? What is easy time? I am sure a lot of this would make sense if I had a few movers and could experiment and see what is going on.
Reply
Re: Is there a 250 spot that will mix color like this?
Ok, last question before I go to bed. Since I don't have any moving head fixtures just yet it was hard to justify buying the software. However, I threw up some of DLED 36's and I can do some great effects with these that are not possible on my show designer 1. Ok tell me how to accomplish this in the real world. 1. I want to create a dimmer chase for Design LED 36's that I can save and then overlay on any of my other static DLED 36 scenes. i.e. Say I have 3 scenes programmed for my DLED's.
Reply
Re: What are some other uses for moving heads at weddings?
it depend on the location too. It amazes me the amount of money people put into weddings. We did this one HUGE set up with lighting. the wedding was in a 3 acre backyard. there was a pond with a water fall, tons of trees, a stage for the band, a huge dance floor and all the seating area. what we did was for every group of trees of 3 or more we would light with century colour 2500's. individual trees we used the design 250 (PR) . the pond and waterfall was all LED lit. front truss was pars...
Reply
Re: What are some other uses for moving heads at weddings?
I definitely know how important lighting is to a wedding...however it's hard to sell a mom on some lights on a band. However, I have found it easier to sell the mood of a room, their name on a gobo, a spotlight on the first dance, uplighting the backdrop or rear wall the same color as the bridesmaid dresses...this is the stuff that makes sense to the purchasers. However, I want the lights for the show! On a side note...I went to demo a design wash 250, and design spot 250 today. If found out...
Reply
Re: Newbie looking for help/advice
Depends on exactly what you are looking to do. If it is just conventional lighting, then a scene setter will do, even with some LEDs in the mix. For movers, you will need some sort of moving light console, be it a Magic 260 (wouldn't recommend), DMX Operator 192, Show Designer 1, the CompuLive computer program, etc etc. If you also want to add moving lights later, I would go for a moving light console so you are not kicking yourself later, or you can do what I often do and use one console...
Reply
Re: Newbie looking for help/advice
I will try out the compulive software thanks! I would also like/need a dmx unit to control all of it though. Woould you recomend one for the movers and one for the wash lights or both in one unit? How is this model : Elation DMX Operator Pro Controller? It seemed to have good reviews on other websites. Or is there one specifically that would best suite my needs. I need one that would simply turn everything on and off at this point, and a dimmer would be nice (But I believe you purchase those...
Reply
Re: Newbie looking for help/advice
Yes, what you are describing are what a console would call a scene. A Scene is just a bunch of lights recorded (saved) to look a certain way when you bring up that scene. So for example, if you made scene 1 nothing but blue lights, when you hit scene 1 the blue lights would come on. If you made scene 2 red lights, the red lights would come on with scene two. If you made scene 3 red and blue lights, both the red and blue lights would come on when scene 3 is up. A series of scenes is called...
Reply
Re: Newbie looking for help/advice
Yes, you have 96 pages that you can add to 8 different books in different ways for each book. The console doesn't say how many pages per book, so I assume you can use as many as you want. Don't quote me on it though. Sometimes you will see something like number of steps per show or chase. So if it says 40 Steps per Show, that would mean each of your books can have 40 pages in it, but you can make up 96 different pages to use in the case of the DMX Operator Pro. Don't think of CompuLive so...
Reply
Re: ETC Express Profile for Design Spot 250?
No problem. If you go to ETC's website, on their Express page at the bottom there is a section called related products. In that section, you can click on Expression Offline and it will go to a new page. Click on the download tab and in the Off-line Software section, you will see Expression 3/Express/Insight 3 Off-line Software. Download and install that. Then go to the menu which you installed it in and open the Personality Editor. It is fairly straight forward to use. Any problems feel free...
Reply
Re: Wireless DMX problem
Hi guys, The WDMX uses 2.45Ghz which has nothing to do with any upcomming auctions.. The Auctions are for frequencies not yet being used.. so this leaves the 2.45Ghz free. Elation decided to partner up with wireless solutions.. Wireless solutions is a swedish bases company that has the WDMX trademark and have been perfecting the WDMX for over 20 years. So although the WDMX is new to Elation, it has already been industry tested for 20+ years. For Licklider, I found that if you turn on the...
Reply
Re: ADJ X-Move LED moving head...will there be an elation version soon?
jon allow me to interject here. the X-series of lights uses a 1 20 watt WHITE LED not RGB. ADJ had decided to go with a white led to maintain even light output regardless of the color. so those are not RGB lights. they still have a color wheel in them. sincerely,
Reply
Re: ADJ X-Move LED moving head...will there be an elation version soon?
I think Jon was correct when he said there are 20 1 watt leds on a circuit board. They do not make a single 20 watt led... If they did, ADJ would not be the first ones to have it. The highest wattage led ive seen was 5 watts.
Reply
Re: Design Spot 575 VS. Power Spot 575
Serra.. I have to say you know your stuff! So i'll just say the same thing Serra said with a different twist. IRIS is an incredible feature with Iris pulse and being able to pinpoint objects. So the Power Spot 575IE gives you that option. -Now- The Power Spot 575ie literally weighs 42 lbs. This fixture is so light to hang you want to hug it. This is because it has a multi voltage electronic transformer, so you can plug it in 220V or 110V and it auto senses the voltage. If you ever run 220V...
Reply
Re: Available Channels
Hi Fish, You have a lot of learning to do. Hopefully Jingles will be able to help you more. Anyhow, when you set up your pages, each page shows you the channels you are using. Say 1-56 or 213-400. So when you study the pages, you can use this information to make sure you do not overlap channels, and you can clearly see how many channels you have free. You can also download the latest software, which should work with your 2006 interface.
Reply
Re: Elation stage setter 8
First question, did you ruin the controller. The answer is no. If anything, you ruined the power supply, but that is also doubtful. You are talking 6 watts vs 3 watts, which is not a lot of power. Second question, just plug and play. You said they have been doing it for a while now, so I am sure you are still fine. After that, I think all your other questions are answered. Must components are capable of handling sightly dynamic loads. For example, almost everything can work on a load from...
Reply
Re: lighting intensity and throw distance
Well, that all depends on beam size and throw distance. How bright something is over distance is can be determined by lumen's. How bright something is over a given area is foot candles or lux. Foot candles are lumen's/ft^2, so it is a more actuate method of how bright something will be over just lumen output which is based off of a single point instead of actually beam size. FC is considered old, but one FC equals 10.764 lux, though some just use a factor of 10 to simplify things. Warning,...
Reply
Re: DMX Programmer Question
I think I've got it figured out now. I believe that Fade drops all active channels to 0 (EDIT: for black that is; Fade transitions to the next channel values otherwise). Unfortunately I just picked up some Chauvet Colorstrips and their RGB mixing requires channel 1 to be at 210-219 and then mixes RGB values on channels 2-4. EDIT: So, from black it has to fade through programs on channel 1 (I haven't tested, but I believe having black w/ channel 1 @ 210 might be ok for in between steps, still...
Reply
Re: design 108
Did you ever get this fixture working? What are your thoughts? I am debating on some new wash fixtures for my light rig and can't decide between Design 36 (already have 8), Colorado 1's, Tri64B's or something else.
Reply
Re: design 108
I never got a chance to hook it up to control do to missing parts. I do own several colorado 1 and they are not a good wash lite. They have a very bright narrow Beam and make good beam lights . I like my design 36 as a wash unit and use them in that fashion often. .
Reply
Re: design 108
You are correct bdunard in the fact that the Colorado is brighter then a DLED36 do to lack of a diffusion filter. I did a side by side of an Opti RGB and a DLED36 and the Opti was brighter, but had a much smaller beam then the DLED36. As far as DLED36 vs Tri64B, they might be about even at the same beam size do to the fact that the DLED uses Luxeons and the Tri64B doesn't. Luxeons are some of the best LEDs you can get, and are priced accordingly. They have a higher output per watt than other...
Reply
Re: design 108
Thanks for the info. I am looking to add some wash fixtures to my new stage. I have truss with 6 Elation DLED 36's uplighting an Austrian sewn backdrop, I have added 6 of the new TriBrick LED's as eye candy on the rear truss. Now I just need to get rid of my Source 4's with color changers. I am keeping to S4's to light the singers up front but would like to add 2 to 3 LED wash fixtures on each tree to wash the band (9 piece band). I've been recommended everything. I would like to be in the...
Reply
Re: design 108
That would be great if you could post the pics! I think I might go with either a TriBrick or a TriPar. I can't really go with anything less bright on my backdrop. I might keep my DLED 36's on the backdrop and just buck up and pay for the TriPars or TriBrick's for my wash. I am going to borrow a TriPar can and compare it to my TriBrick and DLED 36. I might even get a Colorado 3 since it is in the same price range.
Reply
Re: Compu Live Question
I don't have an answer for you. I am new to this type of lighting control. I can't find out how to get started with the basic programing for 15 par cans, 3 RGB and 2 Elliosodials. Help. I also receive a message about a faital error. A second install have a problem with a flickering Pro Bar. It seems to destroy the bulbs. Any recommendations? Partime
Reply
Re: DMX Partner
ok found something out for you. you need to call ADJ support at 1-323-213-4592 because it is supported by ADJ. Tell them what you have and they will try to get something worked out. but no dice on the chauvet product. we don't program those. sorry. Sincerely,
Reply
Re: DMX Operator 192 ULink
I believe it is for back up, software updates, and adding profiles, like ones that Jingles makes or ones you make yourself. I know on some other consoles, like the Show Designer line, you can use it to get a monitor out . This is done with a program and turns your computer/laptop screen into a screen for the SD. There is talk that USB displays will start popping up soon. I know High End is working on one for the Road Hog since it only has 3 USB ports on the console and no displays out. I...
Reply
Re: Dimmer Problems, Termination?
yes setup right on, addressed to 1 and when you bring 1 up, 1 and 2 come up
Reply
Re: Dimmer Problems, Termination?
Hi Joe, Your dimmers have 3 modes 1 channel mode.. all for channels are the same address 2 channel mode.. chan 1 controlls 1 & 2, ch 2 controls 3 & 4. so the pack is only 2 channels. then 4 channel mode.. this is the channel your looking for. breaks it up to 4 channels.. should be on the silk screen of the dimmer.. if not check the user manual. Best regards,
Reply
Re: Major Probs with the Magic 260 App
Frank, The Magic 260 will only run a maximum of 16 channels per fixture. Do these lights have the capability of running in a different mode with less channels? As for the "format error", make sure that you do not use any channel names more than once (for example, if you have more than one color wheel, name one as color 1 and the next as color 2). Also check all your steps and make sure that you are not overlapping any channel values. Hope this helps
Reply
Re: Stage setter 8 & DMX LED panels
Hi Mike, The stage setter 8 is a straight forward controller channels 1-8 or channels 1-6 consecutivly. So the controller will always give you the same results. I think the best thing for you would be to contact Chauvet and see whats up with the Color Pallette.. It has some pretty complex channel assignments, and if you address them to 1 for simplicity sake they should do the same thing. For other channel or menu setting on the Color Palette you need to work with chauvet. Best regards,
Reply
Re: Dip Switch Calculator
This is provided the lights use binary, switch one=1, two=2, three=4, four=8, five=16, six=32, seven=64, eight=128, and nine=256. Some lights use there own 'odd' settings, like HES Trackspots for example. Both the settings for a Universal Controller and DMX are different from binary. Read your manual before you assume it is binary, or look on the back of the light by the dip switches. A lot of lights tell you what the 'code' is for their dip switches.
Reply
Re: Compu Live Question
July 14, 2008 Help! I am sending this to 3 or 4 people I hope can help. I have installed a lighting system utilizing the following components: 1. – Acclaim s-fade6 at the entrance door 2. – Elation Compu -1024c 3. – an A-B switch 4. – Elation RMD620 Arc dimmer for house lights 5. – 6 Elation Pro Bar 4 – for an assortment of pars and ellipsoidals. 6. – 3 Elation RGB LED at various points in the path - They are addressed as 101, 108, 115 Problem: When the x-fade is operational it controls more...
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: Design LED 36 Tri-Brick
Hi Matt, I just heard about this. As far as i knew it was just 1 fixed lens. looking further into the topic, we will have a different lens option but nobody was able to give me an answer. Should have more for you soon. Best regards,
Reply
Re: How to run an SS8 with Behringer FCB1010?
Suspx, Make sure that both the Stage Setter 8 and the MIDI foot controller are on the same MIDI channel. Keep in mind that the MIDI indicator on the Stage Setter 8 will light up even though both devices are on different MIDI channels. Once the proper MIDI channels have been assigned, the Stage Setter 8 will respond to basic note on/note off commands. Here's how to assign the MIDI channel and the table used to send the proper notes. (This is posted on the manual). MIDI Settings: To change...
Reply
Re: 64 bit.....
there is, but i just bought the laptop and 1. it doesnt come with cds from best buy. and 2 i have 4 gigs of ram... not supported in 32 bit. are there plans for a 64 bit?
Reply
Re: another noob question.....
Rick, What channel is the DP-415 address to? If using sliders 5-8 then it should be set to dip switch 1 and 3 on. Also on the Scene Setter 24 you can change the output channel for each slider. Have any of the sliders been changed to control different channels? If so, you can reset them by holding the record button and tapping flash button 7 three times, while in record mode.
Reply
Re: another noob question.....
Now I get it. To get channel 5 i need to dip switch 1 and 3 which equals 5. DUH So if I add another DP-415 I need to dip switch 1 and 4 to equal 9. It's all starting to make sense now. Thanks again for your help Sergio
Reply
Re: Help setting up lights... total noob
Ok... after reading through the forum (which is awesome) last night for a couple of hours I think I figured it out... 1. Set the first DP-415 to read channel 1 2. Set the second DP-415 to start reading at channel 5 3. Set the first group (Back wash) of Color Wash light to read channel 9 (Master/Slave mode) 4. Set the second group (Back lights) of Color Wash lights to read channel 13 (Also Master/Slave mode) Is this right? Am I even close?
Reply
Re: Operator 192 questions newbie...
I believe your issue is that each fixture on the 'Fixture' button represents 16 channels. Since you address the lights in numerical order, the 'Fixture' buttons won't line up. So fixture 1 is really channels 1-16. Fixture 2 is channels 17-32, then 3 is channels 33-48 and so on. Try setting your first group of lights to channel 1 making them Fixture 1. Then your second group of lights as channel 17 making them Fixture 2. Lastly, your last group of lights to channel 33 making them Fixture 3.
Reply
Re: vista 64 bit
isnt there a way to downgrade vista as 32bit? And if you have 4 gigs of ram swap it out for 3? Sincerely,
Reply
Re: vista 64 bit
There is no downgrade from 32bit to 64bit. Instead, Windows XP x64, Vista 64 and Server 64 all have 32bit emulators in them to make 32bit programs work on them. The issue is drivers for 64bit are completely different for 32bit. As for the RAM issue. You can use 4 gigs of RAM on a 32bit OS. The way RAM limits are determined are by your physical extensions and how much your CPU can handle. Most processors now a days are are 40bit, meaning 2^40 bits of memory or 1,099,511,627,776 bits of data.
Reply
Re: How do you select & Group of fixtures?
First off, as if you don't hear it enough, I'm new to the software and just moderately familiar with DMX and programming lights. Jingles, I have two 6 channel dimmer packs that I would like to group fixtures together. Do I just need to change where they are plugged into the dimmer pack and make it easy? Also, I have 8 LED PAR 64's and I would like to group them all together as well as other different groupings. I have 4 Intimidators and colorado 3's that I would like to groups in various...
Reply
Re: Show designer 3
You should have no problem transferring to the new console and not have to rewire and readdress your fixtures. The extra universes are in case you need them, meaning more then 512 channels of lighting, or can make your life easier at times. For example, if you have lights at one side of the room and lights on the total opposite, instead of looping them all together, run one DMX line to one side and another to the opposite side to save on cable and stop possible issues that may arise. As for...
Reply
Re: Scene Setter 24 Password Issue
Dude download the manual on page 3 it says While holding down the record button press bumpers 1,6,6,8 in sequence.