Skip to main content

Tagged With "Artiste Picasso Firmware V1.1.6"

Everything
Reply

Re: Design 36 LED

pulighitng ·
My units are 6 channels like the manual says. 1= red 2= green 3= blue 4= FX 5= strobe 6= dimmer .I have had them on an Avolites Pearl, a strand 550, a Elation Magic 260 , a dove systems IQ512 and a Baxter systems pocket console. I love the light and am using them on a bunch of shows but as far as the internal programs go they are not performing in a manor that is suitable of a professional quality unit. Is it possible to upgrade the chip to function in seven channel mode? I also have 6 of...
Reply

Re: Compatibility Issue solved.

Jingles8302 ·
hee is a link to an adj one. try looking at a few dealers stores for this to find an even better deal http://www.americandj.com/product.asp?ProductIDNumber=1...at=Other_Controllers peace! let me know if this helps. also the dr.DMXIII was discontinued that is why u prob didn't find it.
Reply

Re: Compatibility Issue solved.

pulighitng ·
Mike, This might be a stupid question but have you addressed the units and the dimmers so that they overlap addresses? Dimmer DMX address 1 along with one of the scans If they overlap they will act like they are carping out when you use an attribute in a moving light. Dimmer unit 1 address =1 Unit 2 address=5 scan 1 address =9 and scan 2 address=15… The magic 260 will allow you to chose what the start address is for each fixture.
Reply

Re: Compatibility Issue solved.

elationpro ·
Hmmm.. It sounds like you are having data issues. This means that either one of the cables is not working well. or 1 light or dimmer has a bad output. Here is what I recomend. Try connecting one thing at a time. 1 dimmer, then 1 light, 1 dimmer then 1 light I think you will find the problem this way. As you connect each dimmer, make sure you bring intensities to 100% before you connect the next light. When you find the problem, change the cable. And if all the cables are good, then change...
Reply

Re: Design 36 LED

serraava ·
I have the same problems as well with a few Design LED 36s I just ordered. Great lights, but the standalone programs have strobing in them as well as the internal programs via DMX. Also, according to one of the paper manuals I have in front of me right now, there are two DMX modes. The first is 6 channel mode: R, G, B, Programs, Strobe, Dimmer. The second mode is 3 channel mode: R, G, B.
Reply

Re: Design 36 LED

serraava ·
That just explains channel issues, not the strobing with internal programs and stand alone. The revision of the manual is from 12/06, and the 7 channel list is from 5/07, so the manual has yet to be updated for 7 channels or 6 channel lights are still being made/sold. What I stated is merely what was in black and white in front of me and what was sent with the product. It is also quite possible that PU lighting has an older, 6 channel version of the light and not the 7 channel. I know that...
Reply

Re: Replacing my controller

dan ·
Forgot to mention, for now it would be controlling 6 mac 250's, 24 par 56's and 16 pinspots. In the near future all the pars are being replaced with LEDs.
Reply

Re: Dmx basic positioning and termination

Jingles8302 ·
hey drew! 1) no you can have it all mixed up if you want you just have to address them where you want them is all.so you can have like 2 scanners and two moving heads and have it go scanner head scanner head instaed of feeling like you have to go scanner scanner and then the 2 heads. 2) try putting the hazer as the first in line or maybe try going from lights to haze then back to lights in your line. understand? peace! jingles.
Reply

Re: DMX Operator Pro - Manual Fading

elationpro ·
Hi Mcqueena, I got this information from my DMX OPERATOR PRO GUY Yes… but he has to create a show first then follow the instructions below. Select the “SHOW” button that you wish to playback. The selected Show or Shows will begin to run immediately including the originally set speed and fade times. However, the selected Show speed and fade times can manually be adjusted on the fly by simultaneously pressing the “SHOW” # button followed by the “STEP/MIX/SEQ” button. A rapidly flashing Show...
Reply

Re: Playing Drums and Triggering Scenes - Can I Do It?

losjonz ·
Hi Folks, Making progress on this. - Got my scenes created and put them in a cycle. - Set my scenes to "Go" within the cycle - Right Mouse clicked on Master, then clicked on Settings - Selected "Trigger" from Extern Action and trigger box - Up came a table with tiggerable events. Did the following: X 3. Go to next scene (PGDN) Midi Channel X ALL Midi Note X 3 *Also did the same with 4. (PGUP, Note 4), 5. (PAUSE, Note 5), & 6. (PLAY, Note 6). - Then hooked my Roland PAD (Octopad II) to a...
Reply

Re: Design spot 250

nightraven ·
Sorry for the confusion...let me try again. I am trying to have the 2 fixtures mirror each others movement. When I set them up both facing the same direction LED front facing the audience and the cables out the back. I reversve the pan & tilt on 1 of the fixtures (so that it mirrors the other) it then rotates 90degrees off. I have to physically rotate the base of the fixture 90 degrees to get the moving heads to mirror each other (which they do). But now I have the bases facing different...
Reply

Re: Design spot 250

elationpro ·
That's what I was thinking you were doing. The Design spot 250's have 2 different pan rotation settings. 1 is 540 degrees 2 is 630 degrees I believe they are set to 630 degrees from us here at the factory. this 630 degree pan setting makes alot of things not match very well. So look for the degr setting on your fixtures and set them both to 540 degree's. See how that works for you. Best regards,
Reply

Re: Octopod 80 with Magic 260 profile?

Jingles8302 ·
hello lemon! welcome to the forums. i think the problem your running into is the magic 260 controls only 16 channels per fixture. so if u want to run all the octopods as individuals you would have to buy more pixel drives in order to achieve this. because to control one set of octopods individually u would need a console that allows up to 48 DMX channels per fixture. u see the pixel drive and all 8 pods are considered (as far as your controller is concerned) as 1 fixture in the DMX line.
Reply

Re: Octopod 80 with Magic 260 profile?

lemonjello ·
thanks for your reply, so far I can control all 8 pods on one "fixture" second group on 2nd "fixture". is there any way to assign one pod to one fixture? the magic has 24 fixture buttons so theoretically could it be programmed channel 1-6 as fixture 1; 7-12 as fixture 2, etc? it seems pretty logical. According to dmx language or does the pixel drive override this? in 48 channel mode it allows for this, 6 ch per pod. Anyone else with experience or info?
Reply

Re: Octopod 80 with Magic 260 profile?

elationpro ·
Hi Lemon, Yes.. right now, you can control each pod individually. if you use the 48 ch. mode. So each pod will be 6 channels each. So pack 1 will start at 001 pack 2 will start at 049 pack 3 will start at 097 Ch 1 is rainbow ch 2 red ch 3 green ch 4 blue ch 5 strobe ch 6 chase If you use ch 6 to engage a chase of which you have 8 chases. ch 1 becomes speed time, and ch2 becomes fade time.
Reply

Re: Octopod 80 with Magic 260 profile?

elationpro ·
Hi Jingles.. That's actually incorrect. He can assign 1 pod per fixture button. in the 48 channel mode, basically every octopod becomes its own fixture with 8 channels to operate. so if he uses the alkalite profile on his magic he basically needs to set each fixture to be an alkalite fixture. so if he has 24 fixtures then he has control of each pod. Each pixel drive can be one fixture, two fixtures, 4 fixtures or 8 fixtures. Best regards,
Reply

Re: Hey Guys!!! I'm Back . . . again

tylerherron ·
Hey John, James told me to tell about this. It is a quick story that I experience on tour. Our lighting guy is 16 (yes they put a 15 and 16 year old in charge of all that equipment, scary huh?) He really isn't a lighting guy he just knows how to run the software. He really just wants to play in a band. Anyways for awhile I have been learning from him, but now it is different. Since I've been on these forums as well as the ADJ forums I have learned ALOT. Well at one of our shows we had the...
Reply

Re: Lighting Newbie

jpal ·
I assigned the dimmer pack to A129 as stated in the manual. then i set the dimmer pack to work for only 2 channels. then i plugged in a par can light to channel 1 and another par can light into channel 2. as you said, the console should make the channel 2 light work on the next fader which is 130. but that's not whats happening. Fader 129 is turning on both of the lights, and fader 130 doesn't do anything. I know the next thing u guys might say is check what outlet im plugging the par can...
Reply

Re: Lighting Newbie

tylerherron ·
@JPal Congrats on getting you accu spots working. now for the dimmer pack. This particular pack has 3 modes (as you already know) 1 channel, 2 channel, and 4 channel. Here is how they work: 1 Channel This setting allows all the lights plugged into the pack to be turned on/off using one channel. Meaning that if you set your pack to 1 channel mode and the address is at A129, when you turn on that fader all the lights will come on. 2 Channel This setting allows the four channels to be turned on...
Reply

Re: Lighting Newbie

jpal ·
ohh, ok thanks, i thought they were speaking of the par can. now has the acuspots 250II's had any problems b4 of overheating or just shutting off the power, bcause i used it for 1 program, and it shut off after a little while meaning the lamp shut off, and then it went to stationary position. Has there been any other complaints or worries like this.
Reply

Re: A couple of questions about design spot functions

elationpro ·
Hi Steve, you may need to contact James. #1 It sounds as if you are having programming issues.. In order for you to be able to have colors, gobos and movments stay, you need to learn how to use the Compu live to "program" your own scenes or looks.. #2 has to do with #1. Best regards, John Lopez
Reply

Re: Show Designer 3 manual question

elationpro ·
You want to record presets.. Page 18 of the manual. I am not finding missing letters in the manual.. can you let me know what pages? <b>CREATING AND RECORDING PRESETS</b> Before recording a preset you must first do some preparation. In order to be able to view certain moving light channels like color or gobo you will first need to raise the dimmer levels and set the pan and tilt positions in order to see the color or gobo selections. Do this by selecting the fixture or fixtures...
Reply

Re: Need .SSL file American DJ Revo III

elationpro ·
This is an easy one guys. create a profile in the 4 ch mode. ch. 1 = mode.. do you want to be in pattern mode or chase mode. You can select this using ch1. Ch. 2 = the pattern or chase your secting. Ch. 3 = speed of either the pattern or chase. you need to select this after you select a pattern or chase. ch. 4 = dimmer.. if you don't have the dimmer on full then you wont see any pattern or chase. The 10 Ch mode is confusing.. I put a call into the ADJ pros and waiting to here back. Best regards,
Reply

Re: Stage Pak 1 how to set up?

tylerherron ·
Oh man I can't tell you how much I laughed at that! Ok anyways, DMX, it really is a cool thing. Here are some basics. DMX stands for D igital M ultiple X . It is a way for each and every (DMX Compatible ) light, made by any manufacturer, to interact with an universal DMX controller. In a standard DMX protocol (called 512-DMX protocol) there are a total of 512 "channels" In order to get your lights to interact with the controller, you must address them. There are 2 ways (that I know of) that...
Reply

Re: Stage Pak 1 how to set up?

Jingles8302 ·
on a side note. your spot 250 uses 6 DMX channel and the vue 3 uses 9. 9+6=15 DMX channels total. so you only have room for maybe one or two pars on the stage setter 8. might want to look into a bigger controller. like jthtigers DMX operator 192.
Reply

Re: OPTI 30 RGB

serraava ·
That is one Opti 30 RGB, all LEDs on. It won't out shine a 500w Par 56 or 500w 6", but it does keep up or out do a 120w Par 38. Also, beam is fairly tight as you can see in the picture. Sorry about the quality of the photo, done with a camera phone.
Reply

Re: Color blast 12 profile for Magic 260

lemonjello ·
wow, thanks for answering none of my questions. Any profiles for the magic 260 for CB 12's. simple 3 channel, no strobe/fade funct. They work similar to octopod 80's. the pds 750 auto addresses fixtures xxx, xxx+3, xxx+6 etc.
Reply

Re: Octopod 80 Elation Policy be warned

ben ·
January 2007 was the complete lightning installed in Dania Beach where my restaurant brandnew was becoming ready. The choice of the system was basically done by the professionals as the installer Sound & Lightning Ft. Lauderdale and his order to elation company. I only have had a fix amount for every thing which was paid after finishing the job. Couple of months later some of the lamps got discolered and I complaint. I was asured that they will be switching the plates and so were 6 of...
Reply

Re: Wireless DMX problem

tylerherron ·
Ok, I'm assuming you are using the Elation W-DMX products (since your posting in the Elation forums!) The manual is kinda confusing but I think I may have worked it out. Here is the excerpt from the manual that I read and this is where I came up with this fix. Tell me if you have already tried it: So what this tells me (very vaguely) is that to fix it, you may need to do something to your transmitter. Since your receiver is showing solid red, that should mean it is "free" According to the...
Reply

Re: OPTI 30 RGB

serraava ·
Problem is jingles that your middle men don't do their job real well. I can tell you I ordered a PS575, within one month, the lens in the front had fallen out, and the dimmer didn't work. It also had a few other issues. They sent my advanced replacement out late, despite saying it would be there a certain day, and because it that, it hurt a show I was doing and lost money on it. About 6 months later, I ordered 2 PS575IEs. One light, 2nd show I used it for, about 3 weeks old and under 50...
Reply

Re: Riva 80

Jingles8302 ·
Cant go wrong with a few sets of the riva 80's and about 4-6 design spot 250's and we even have them in a white case to help them blend in to your celing. my two watts. you could even get white truss.
Reply

Re: Riva 80

rain ·
Hey James - Yes, considering laptop or desktop computer for each Church this time around for ease of programming. Neither facility has ever used more than a light switch and a dimmer, so I hope by them NOT having experience, that the software is the easier route to go. The church in the pic above wants key light/features on the pulpit mainly. Then they want to be able to feature the orchestra pit (drums,bass,guitar - keyboard,piano - choir) Praise singers are just infront of the band. For...
Reply

Re: Riva 80

rain ·
Yes, I've read a few posts here already where you were able to walk them thru step by step - Sure I'll need some of that on site assistance in a few weeks if you are still game for it! HAHA! Shame you are frozen in up north or I'd buy ya a beer or 6 and have you program it for us - Keep ya posted and THANKS Rain
Reply

Re: Riva 80

Jingles8302 ·
also the HPs will definetly be brighter as they are 1 watt LEDs versus the smaller led bulbs in the rivas.
Reply

Re: Compuware04 and chauvet 250c's

gary ·
jingles I have the compu club blue one with 1 dmx out, also will this dongle work with the compu club06? Thanks Gary
Reply

Re: DMX Operator Pro

Jingles8302 ·
OK WELL THE PRO BLOCKS THE FIXTURES IN 16 CHANNELS EACH. THAT MEANS THAT FIXTURE BUTTON ONE CONTROLS CHANELS 1-16 AND FIXTURE BUTTON CONTROLS 17-32 and so on and so on. so if you wanted to put 1 led one each fixture button they would need to be addressed as follows. (assuming they are 6 ch's) led 1:001 led 2:007 led 3:017 (that would be on fixture button 2) understand where im goin with this? if you have dip switches here is a helpfull tool DIP SWITCH CALCULATOR Sincerely,
Reply

Re: black lights

serraava ·
Continuing on now: The buzzing noise is known as lamp sing, it's caused by the power being turned on and off really fast. The way this is fixed is more expensive dimmers have what is known as a choke after the SCR so the power change is as dramatic as on/off. The better the quality of dimmer, the less lamp sing you will get. Now why non-dim isn't really non-dim. Despite you setting a dimmer to non dim, either via the pack or the console, the power still passes through the SCR and choke. So,...
Reply

Re: DMX operator PRO 32MB Card

Jingles8302 ·
hey miccie. i do not know how to use the 32MB cards. your best bet would be calling adj support as they support you controller. here is the number. 1-(323)-582-2650 sincerely,
Reply

Re: Demo Download?

ebaclights ·
Thats great! Would it be to much trouble to just add the rest of the room, its 85' total length. And can you make the 6 columns that we have on the stage somehow? If so, thats all I will need. Thanks again! Justin
Reply

Re: Design 36 LED

pulighitng ·
I would also like to add that i have found a few issues with my chauvet Colorado 1 units and was not willing to buy more of them yet. I do need a unit with a narrow beam like they have
Reply

Re: Design Spot 250 PAN Problem, Help!!

pulighitng ·
I had one of mine do that today. I hope it is a simple fix as i am starting my show in 1 hour i just had to swop it out. If you need to rent a few to hold you over let me know i have 18 in lafayette.
Reply

Re: Request for basic newbie info...

manford ·
Update! I have come up with a hardwired (literally) solution to the issue with fade time deactivation. I'll try to explain as clearly as I can, and apologize ahead of time if I lose anyone along the way. I'm using the Behringer FCB1010 to control the Operator 192 via MIDI. What I forgot about the 1010, is the ability to use the 2 built in "Switches" to control analog functions of amplifiers, just like a traditional stomp box that controls reverb/clean channel functions, etc. These are simple...
Reply

Re: dxm operator pro

serraava ·
If you are running DMX 500+ feet, I would highly recommend a DMX Branch or Opti Splitter of some sort. More then 1000' and you will need one because the signal drops off at that point. An opti-splitter does more then isolate. It also helps amplify DMX signal like a DA (distro amp) does for video. The isolation also isn't for lighting strikes, it helps if you have faulty power or your console and fixtures are running off of a different ground. This can cause problems just like in audio,...
Reply

Re: Scene Setter 48 issues, less than 1 year

elationpro ·
Hi World.. Elation guy jumping in here. in the world of consoles in general the faders and buttons you commonly use will need to be replaced sometime or another.. sometimes sooner than later. With the Elation consoles we strive to use the good components to do the Job and not the best component made.. That is why you will see some lighting consoles for alot more money than the Elation product, and some consoles for less money. We believe our consoles are a great value for the price. However...
Reply

Re: Scene Setter 48 issues, less than 1 year

worldcreator ·
How is it determined that problems are caused by manufacturer defects VS. wear & tear? The fader I'm having a problem with has barely been used, and the bumps that have lost their spring are the ones hardly used as well. BUT how can I prove this? What might potentially be the labor cost for repair of these? Now I'm thinking that in addition to the shipping costs it might not be worth sending it back for repairs... Can a regular lighting shop fix something like this pretty easily?
Reply

Re: A silly question about polarity on a Show Designer 1.

elationpro ·
If you look at the showdesigner you have a picture of the pin with a half circle around it.. then a +2 on one side and a -1 on the other.. or something like that. Check out the Robo scan manual and make them match. I think since the Robo scan is old, they only put current fixtures on the SD1. You can use the modify fixture option to recreate a 7 chn. fixture and name it ROBO SCAN. Bset regards,
Reply

Re: need help urgent

elationpro ·
Abhi, Don't sweat it. you don't need a personality.. especially if you don't know what light you have. use 32 DMX channel fixture. It will give you 32 channels to use, but you only need to use 2 of them on 1 fixture and 9 channels on the other. From this point all you need to do is modify the fixture, and say it only uses 2 channels or 9 channels.. and you can rename the fixture to the name of the fixture you actually have. This is the best way for you buddy, Best regards,
Reply

Re: dxm operator pro

tmgchuck ·
Sorry... I'm a bit late jumping in here and this is just another bit of useful DMX knowledge... per DMX512 protocol document, the maximum number of devices that can be supported per run of DMX is 32 devices. Now... that being said, lest you panic, a dimmer rack counts as 1 device.... The only way to successfully get around this limitation of 32 devices per line is to insert an opto splitter. Then you have the capability of 32 devices per output port on the opto splitter. Honestly though,...
Reply

Re: dxm operator pro

serraava ·
32 max is pushing it. I generally start having problems with LEDs at 8 fixtures, depending on length of the run and fixtures in question. Dimmers, I daisy chain those things forever and they don't care, and I am talking racks upon racks upon racks. Movers, depends on the brand and length of cable in question. Some days it's 16, others it's 20, sometimes I can only get 6 on before the 7th starts acting up. If your last fixture in line is acting funny, and a terminator isn't helping, chances...
Reply

Re: Power Distribution Help

esteban ·
leprecon just has it listed as 4-pole-3 phase/1 phase mains breaker there is a 3 pole option too, best bet is to call a dealer to find out for sure. this is a link the the pdf of the distro page so at least you can see a picture of it. http://www.leprecon.com/productfiles/PwrDis.280061B.pdf
×
×
×
×