Skip to main content

Tagged With "Show"

Everything
Reply

Re: Show Designer 1 Bricked

ELA GINES ·
greetings if you are comfortable working on the unit the try the following: with the units unplugged open it up.. you will see a large PCB with multiple E-proms. make sure they are properly seated then retest.. if successful then close the unit up and enjoy if not then you may need to send it in for repair: for RMA requests email RMA @ELATION LIGHTING.COM
Reply

Re: Show Designer 1 Bricked

ProfFilament ·
Thanks for your reply, Ela! I just got off the phone with support and they said something similar about the PCB and sent me a RMA request form. I'm curious though, since that repair sounds like something that I would feel comfortable trying, do you know if opening the unit would void my warranty and make it so that I could no longer send it in for an RMA repair?
Reply

Re: Show Designer 1 Bricked

Rafael C. ·
To whom it may concern, The display PCB's have changed in time but it's the same operating system. It could be either a bad display or a bad PCB inside. If it's within the 2 year warranty your best bet would be to send it in for warranty repair. You can always send an email to rma@elationlighting.com to set you up with a RMA to send it in. If it's not under warranty anymore and if you have another working unit with the same color display, you can always start by trying to swap out the...
Topic

How to change CR2325 in SD2

Liberty Opry ·
Showing Battery Voltage is Low and trying to figure out how to change the battery. Do you just have to unscrew the back of the board to get to the battery? Thank you Nina Cantu
Topic

Show Designer 1 Bricked

ProfFilament ·
Hello, This is my first time posting on these forums, so please let me know if there is a better place for me to post about this (I searched and couldn't find any posts about similar issues). I work at a company with several Elation Show Designer 1s. They have been reliable, but we had ordered a new set of them a little while back that seem to have been from a different series of production, despite being the same unit type (Show Designer 1). I say this because our original units had blue...
Topic

Fixture Profile for American DJ Focus Spot 3 moving light

phillipmaz ·
Hello, I'm wondering if anyone has a fixture profile for an American DJ Focus Spot 3 light, or know of another profile that is already in the SD2 profiles folder, that will work with this fixture. The fixture has both an 18 and 21 channel DMX mode, while the SD2 only has 16 and 24, neither of which have worked with this light. I am using a closed government network so I'm not able to download and use the fixture profile creator that I've seen mentioned on other threads. Thank you for your...
Topic Featured

Compu Show has moved to ADJ.

Jingles8302 ·
Hello All! Compu show products and support has moved to the ADJ forum as ADJ now sells compu show hardware under the ADJ Brand. Go here: ADJ Compu Show Forums and join the ADJ Forums for Compu Show support.
Reply

Re: Fixture Profile for American DJ Focus Spot 3 moving light

ELA GINES ·
greetings please send profile request for the show designer 2 to support at elationlighting.com
Reply

Re: Fixture Profile for American DJ Focus Spot 3 moving light

Jingles8302 ·
Hello, we actually do have a profile online for this fixture, you can download it here: https://www.dropbox.com/s/9vwp...a/FOCUSSP3Z.sdf?dl=0 This profile is for 18ch mode.
Topic

Show Designer 1 - Not operating

SquireDude ·
Hi, I recently got back to my Winter job and found that our Show Designer 1 is inoperative. When I tried to turn the power switch on or off the blue LCD screen flashes for a second then goes blank. Nothing is operative on the board, no lights (LED) or anything. Is there a method of restoring to factory? Or is this a failure that needs a factory repair (RMA)? How do I contact Elation for an RMA ans shipping instructions? Thanks for the assist in advance. SquireDude
Reply

Re: Profiles For Show Designer 3

HJ Tucker ·
Wow, thanks. That was fast. And, my mistake, it's not the MH2 I need, but the Rush MH1 Profile Plus profile. Let me know what you need for that. HJT
Reply

Re: Profiles For Show Designer 3

Jingles8302 ·
Email me directly the PDF of the DMX chart, also let me know what channel mode(s) you want. Jamesk@adj.com
Topic

Profiles For Show Designer 3

HJ Tucker ·
Hi all, Trying to find or make Show Designer 3 profiles for the following lights: Elation SIXPAR 200 Martin Rush MH2 If anyone could supply these or set me on a course to creating them, I would so appreciate it. Thanks!
Reply

Re: Profiles For Show Designer 3

Jingles8302 ·
Six Par 200: 12ch: https://www.dropbox.com/s/gd1c...0200%2012CH.sdf?dl=1 8ch: https://www.dropbox.com/s/0370...20200%208CH.sdf?dl=1 7ch: https://www.dropbox.com/s/z8ds...20200%207CH.sdf?dl=1 6ch: https://www.dropbox.com/s/wi0g...20200%206CH.sdf?dl=1 The Martin Rush fixture is not currently made. If you link us, we can make it for you within 3 business days.
Topic

Need a profile for a SHEHDS Moving Head Light LED 36x18W Wash Zoom Effect (15-90 Degree) DJ Lights RGBWA+UV 6IN1

KSolomon ·
Our school has been using an Elation Show Designer 2 for many years. We want to add two new lights, but the person who knew how to program the board is long gone. Is there a profile that would let the board control this light SHEHDS Moving Head Light LED 36x18W Wash Zoom Effect (15-90 Degree) DJ Lights RGBWA+UV 6IN1 Any help would be appreciated. I know nothing.
Reply

Re: Need a profile for a SHEHDS Moving Head Light LED 36x18W Wash Zoom Effect (15-90 Degree) DJ Lights RGBWA+UV 6IN1

Jingles8302 ·
Hi, do you have the means to load new profiles onto the console via the CF card or the serial cable? If not, then making a profile will do you no good. Let me know. Is it the SD2CF?
×
×
×
×