Tagged With "Paladin Cube Firmware V1.04"

Oh sorry Jan 04 2008

thanks for the reply that's pretty much the direction I've been heading, as far as grouping compressed buttons for a song; there has to be an intent from Elation when this was designed, as far as how to group scene/switch for songs; James, do you know this??? as to the ordering, it goes a character at a time, so everything with a '1' in the first character get's grouped, then everything with a '2', and so forth; then the second character comes into play, so '1' then '10' then '11' etc to get...

Actually the link i sent you too will give you the drivers and software for the 04 software. That should work on Me. which interface do you have?

try this link for the 04 software. http://www.elationlighting.com.../ela_2004-093005.zip and drivers. http://www.elationlighting.com...les/siudi_driver.zip

I just got off the phone with you but i wanted to update the post. Your good to go. you may have to send in that 04 interface for repairs though. Or purchase one of our new interfaces such as Compu Cue or Compu Show. Sincerely,

are you sure this is the newest verizon when i download it . it sayes 2006 ?

Hey James In the language selector, English is selected, even though everything is in french. Says Copmu Club 04 on side, but have been using with 06 for many years through the upgrades no problems. Blue box USB s/n 3306479

Ok. Does the June 2010 software still detect your compu 04 interface? Sincerely,

Ok good it still detects the 04 hardware. I had though the midi con will work and save triggers on the unit however we do not have a midi map file for midi con. And I have been speaking with a developer of ours and I am not sure if they can make one for it. But like I said let me look into this in depth and test with my midi con and June 2010 install and I'll get back to you early next week when I know something. Side note: have you checked out our new compu show software? It's the next...

Hey Don. Did I give you a little walk through of compu show and you gave m a list of ideas for the program? I remember you. Yes the program will tell you the model interface. If you don't catch it at start up simply go to the "?" and click about. The Red one is most likely a 2004 model, probably compu Pro 04 or maybe compu Club. Yes The manual SHOULD be done sometime soon and afterwards I'll have more time to make videos. Sincerely,

with the dongle detached, it's in english... as soon as I hook up the dongle, bam!!! It turns to french, and english is turned off. My dongle is a compu club 04 dongle serial # 26058011 It has worked with all previous versions of compu 2006. Like I said, Bruno was saying he boobie trapped the new build so that you'd have to upgrade to a more expensive version. any thoughts? Does this only apply to sunlite, or is elation gonna' force equipment upgrade on us, and orphan previous builds?

all good questions.. will investigate.

looks like club 04. Is there an upgrade for that? Thanks! I am also having a tough time getting a midicon to work with it Compu. It works great with Emulation!

We don't offer any upgrade pricing or options from a club 04 to one of the newer ones. Sorry. What exactly is not working on the midicon in compu live? Sincerely,

The lesson to all others just learning about the new types of instruments and their usage and care is to be aware of and practice removing power from them unless the manufacturer states otherwise. "Consistent operational breaks may ensure that the fixture will function properly for many years to come." — Elation Professional Design Spot 250 Pro manual, Rev 04/28/2008 - Visage, downloaded from the product page and included in the packaging. This is the only statement in the manual remotely...

Hi you need to update the Enode 8 PRO to firmware 2.8, attached is the user manual. you may need to email firmware@elationlighting.com to get the firmware.

Upload Tool: SNI Software Uploader eNode 4_V1.1 Only for V1.X units ENODE 4 V2.6 Firmware Only for V2.X units Enode update Instructions You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...

Hi i need a profile for a Showtec Shark scan for the emulation software (old) I added the manual Thanks in advance Peter

Upload tool: CUE Software Uploader Paladin V1.20 What's New: -Set C-Loader to SLOW!- Firmware version: V1.20 Firmware date: 31-01-2022 For Serial numbers: All Units NEW: - Messy display code bug solved - RDM addressing issue solved You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our...

Uses C-Loader uploader tool. Paladin Brick/ Brick WMG Firmware V1.07 What's New: -Set C-loader to SLOW!- Firmware version: V1.0.7 Firmware date: 22-08-2022 For Serial numbers: All units NEW: Optimized RDM You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick...

you have to determine via the menu/ software version, physically they are identical. if you have to replace the main pcb on an older unit (V1) the board will now be a V2. basically the update was needed due to end of life components.

Uses C-Loader uploader tool. Paladin Panel Firmware V1.0.7 What's new: Fixed display code bug and resolved a RDM addressing issue. Power output optimized. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and...

Uses C-Loader uploader tool. Paladin Cube Firmware V1.0.9 What's New: RDM optimized/solved bug that caused a locked unit when RDM was used. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do...