Skip to main content

Tagged With "Firmware V1.17"

Everything
Topic

Paladin Panel Fixture Firmware

elationservice ·
Uses C-Loader uploader tool. Paladin Panel Firmware V1.02 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Fuze Par Z60 Fixture Firmware

elationservice ·
Firmware Tool Required: C-Loader II Fuze Par Z60 Firmware V1.06 What's new: See release notes included in the download. This update resolves intermittent flicker issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic

eNode 4 pre-sales support questions

Dave Nelson ·
I'm considering the purchase of an eNode 4 ArtNet-to-DMX output device. I have some questions. 1. There doesn't appear to be any firmware download available under the Support / Downloads link on the Elation home page. Why is that? 2. I found an article in the forum that referenced a firmware updater appliance (hardware product). Does the eNode 4 indeed require a specialized appliance to perform firmware updates? If not, where are the alternate instructions and firmware update files located?
Topic

ACL360i Firmware V1.1.3

elationservice ·
Upload tool: CUE Software Uploader ACL360i Fixture Firmware V1.1.3 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

WW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader WW Profile HP Firmware V1.1.5 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

CW Profile HP Fixture Firmware

elationservice ·
Uploader Tool required: E-Loader CW Profile HP Firmware V1.1.6 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

Artiste Picasso Fixture Firmware

elationservice ·
Upload tool: None, fixture has a USB service port. Artiste Picasso Firmware V1.1.7 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic

Smarty Max Fixture Firmware

Jingles8302 ·
Upload tool: E-loader or fixture has a USB service port. Smarty Max Firmware V1.3.4 What's new: See release notes included in download. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Topic

Change flash buttons

hofdahl ·
Hi folks! I just bought the Emulation Software and the MIDICON today. I have a generel question - apparently others than me, tried to get an answer like mine. I cannot get anything out of that. I run the software on a Windows PC. There is some Flash-buttons in the top screen: FOG, STROBE and BLINDER. I would like to have such buttons on the MIDICON, without using any of the playback buttons. Example on the buttons 17-32 in the top right of the MIDICON. - Can those be used as any kind of...
Topic

Scene setter 24 with 4 LED par

rey ·
I'm trying to setup my 4 LED par, assigning an address of 1 to 5 for the first par(address 1), 6 to 11 for the second par(address 6), 12 to 16 for the third par(address 12) and 17 to 21 for the fourth par (address 17). My problem is all the first 3 par is working will with the faders, except the last par (4th par) is not responding anything from the faders. Hope someone can help here..Thanks!
Topic

e spot led vs e spot led II

ljraph ·
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic

change Platinum Spot 5R to 24 ch mode?

thebadmanor ·
Hi, I need to change some fixtures from 17 ch mode to the 24 ch mode and can't for the life of me figure out how. anybody know how to do it? Thanks
Topic

Rayzor Q7 & Q12 Zoom Fixture Firmware.

elationservice ·
Uses E-Loader uploader tool. Rayzor Q12 Zoom V1.1.6 Fixture Firmware What's new in V1.1.6: Enhanced Zoom calibration on the fixture menu display and added ability to do fixture reset on DC display power (battery powered) Rayzor Q7 V1.2.3 Fixture Firmware What's new: Fixed a slow movement bug in the software. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your...
Topic

Satura Series Fixture Firmware

elationservice ·
Uses E-Loader uploader tool. Satura Profile Firmware V1.0.10 You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com
Topic

DMX help with Compu 06

schadow ·
I'm setting up CompuPro to work with existing lights at a club. They have 6 Track Spots that use 7 channels each but are addressed at 16 channel intervals, 1, 17, 33, ect. When I add them to a page in CompuPro it addresses them in order. Whats the best way to set them up so they have 9 blank channels between them. Thanks.
Topic

Compuware04 and SCX500's

gary ·
I am wondering why when I start with my first scx500 at address 17 thru 24 and 2nd unit 25 thru 32 ect. ect. untill I have all six set that when I start a new page use explore pick scx500's and the ask if you see beam, 50% and so on my first 4 lights are open and pink and the last two are open and white I'm also concerned that the first 4 lights won't take white with software. Does this sound like a problem with the software or the scanners last week they seemed to work well together. I hope...
Topic

Magic 260 and MIDI

j4f-band ·
Hi Friends, on August 17 2008 User "Davey Boy" wrote: Now I have the same problem. Why is there no response on how to control the Magic 260 with MIDI? And I have a second question. Which function has the led over the Delete-Button. I've never seen this led has shone, wether I pressed the Delete-Button or not. Thanks in advance!
Topic

stage setter and compulive...

dazzler ·
Good afternoon, I have yet another silly question. Can I plug my stage setter 8 into the input of the 1024 dongle and control my dimmer packs that way? I wasn’t sure if I could so I just ran another set of dmx cable from the stagesetter to the dimmers. It would make things a lot easier and I would only be using half the cable that I use now. I would guess the only change I would have to make in the compulive would be to have my first intelligent light start on channel 17. The stage setter...
Topic

Elation DMX Operator Pro Controller

kevoh ·
I am at the section: Setting DMX Address Channels for Moving Lights. I can set fixture 1 to channel 1/(out 1). but when I try to set fixture 2 to channel 17 I cant get the channel to display anything higher than 16. anyone have some advise?
Topic

Need Help - Scene Setter 48

markus ·
Hello All, I really need any expert advice, so please chime in no matter how remote the solution might seem. I'm a relatively newbie and am caring for a SS48 in our youth group sanctuary. We have 4 dimmer packs (for conventional lights) and multiple ColorKey LED Par 64 cans. To give you some reference. This is a our setup: Channels Controls 1-4 Set of 6 LED PAR cans (Channel 1) 5-8 DimPak: 8 conventional cans (2/Ch) 9-12 DimPak: 8 conventional cans (2/Ch) 13-16 DimPak: 8 conventional cans...
Topic

Major Probs with the Magic 260 App

frankschlender ·
Hi. I have been trying to set up fixture profiles for the Futurelight PHS-700 and PHW-700 to be able to use the magic-board in full. No way. The editing app does not accept the order of the channels I set up. It keeps squeezing the Pan-Fine channel on position 2, whatever I do. Thus, the Heads simply don't react at all. THIS SUCKS. The PHS and PHW have 17 Channels, but I won't use the Pan Fine and Tilt Fine at all, so I want to simply skip those. In the listing everything looks fine, until I...
Topic

Dip Switch Calculator

jeffjams ·
Hey guys, I ran across this, and for some of you guys into DMX this will help you tons. Its a DMX Dip switch calculator. Just enter the address in (Example say 17) and it will convert that number into the dip switch settings. http://www.sabretechnology.co.uk/calc.asp?dmx=17 I will try to find a downloadable version for you guys and will stick it on my site. That way you can take it with you and stick it on your laptop or what ever. Peace out.
Topic

Programing Problems SD1

ms5435 ·
This is my first post, so please be kind. I have no prior knowledge of DMX lighting. I help out a local ministry and we recently purchased a used SD1 w/ Rev. 3.03 M1. We have 16-AM/DJ P64LED, 2-MD/DJ Accu Spot 300 & 4 Cheuvet Q-wash 250. None of these fixtures are listed under the fixture selection one the SD1. I read the SD1 manual. I am starting out by attempting to control just one P64LED. I have the #1 switch in the ON position and all others OFF. I do understand the addressing on...
Topic

Design Spot 250 and Leviton MC 24/48 console problems

guitarbuck ·
I have 4 Design Spot 250's and the NSI MC 24/48 console along with some Par 64's on dimmer packs, here is my problem: I have DS 250's paired, 1 set controlled on DMX ch. 1-16 and the the other pair, on ch. 17-32. 1 pair of lights works fine, on the other pair, the lamp stays on all the time, I have been thru the menu on the light itself and reset it, I have tried just about everything, can anyone help?? also, if anyone has preprogrammed material for this, just a simple chase scene, that...
Topic

How to activate Sound to light (DMX Operator)

09a ·
Hi there. I got 2 ADJ Revo LED Scaners and an ADJ Fx Bar 4. I hooked up all of them by dmx and the elation DMX Operator Controller, set adresses to 1 for the LED Scanners and 17 for the fx bar. Everything's working fine. Now I wanted to know if 1. there is a way to activate a synchron sound to light mode on the LED Scans by the Controller because moving the fourth fader to 100% activates stand alone mode and they are sound active, but not synchron anymore. On the Productsite you can read...
Topic

Venue Dual Scanner Profile

goldmatte2000 ·
Hey I was wondering if i could get the profile for the Venue brand Dual Scanner. http://www.guitarcenter.com/Ve...X&CAWELAID=447027051 There is not much documentation on this product, so pardon my bad Profiling of the channels. it's a 4 channel scanner: Chan 1: 165 Degree pan control Chan 2: 110 Degree Tilt Control Chan 3: Gobo as follows 0-5 Blackout 17-29 Open 30-47 Gobo 1 48-62 Gobo 2 64-80 Gobo 3 84-95 Gobo 4 99-109 Gobo 5 110-128 Gobo 6 130-140 Gobo 7 142-154 Gobo 8 159-175 Gobo 9...
Topic

DMX Operator Slider problem

sonny ·
Hi, I've got a DMX Operator that's been having some problems with the sliders. Of the 6 sliders on this board, 5 of them show a range of 0 to 246, and one of them ranges from 17-255. I know that at one point in this board's life they all ranged from 0 to 255. Any idea what's going on and if this is something that's repairable?
Topic

HD Video shoot With Elation Fixtures

flash ·
HD Video Shoot I Will be the Lighting Director for for a HD video Shoot. This will be in a Rock Club (www.ClubTinks.com) June 17. The band just got picked up by a major Label The bands Name is The Silent Treatment (www.myspace.com/thesilentreatment) I will be using 50 / 500 watt Pars 8 / 250 watt Active Scans 4 / 250 watt Power Spots 4 / 575 watt Ellipsoidals 4 / 575x3 watt Stage Colors All Elation fixtures. I will be using NSI 24 Channel dimmer board (multiplex)For Pars NSI 128R MLC...
Topic

Operator 192 Question

soundguytyler ·
A couple questions 1: I can not find in the manual How to set the the fixture. Like fixture 1 to 1 and 2 to 17 (is that correct methodology?) On the board, I know how to do the lights. Also is it recommended to set each light to it's own channel, are they group able? The band I have to set up has like four scanners (and a bunch more stuff), and they are in a row behind the band, and I was wondering if it would be simpler to just do them as two sets of two as far as adressing goes? One last...
Topic

design spot 250

pulighitng ·
Two quick question, I have recently purchased 18 of the design spot 250 and am starting to use them more often and was wondering two things. 1. Can you replace a color with a CTO for use during video shoots? 2. In the online spec it says that they include a second lens that is 20 degrees How do I get them. OPTICAL SYSTEM • High output luminous-parabolic dichroic reflector • Beam Angle 17° • Replacable Beam 14°, 20° angles (included) • All lenses are anti-reflection coated
Topic

Trackspot profiles

italiatib2k3 ·
Is there an updated profile for High End's Trackspots? V1 somewhat works, but V2 does not. (I use the 2006 version of Compuware with the blue interface). With the V1 profile, the Color and Gobo features are all screwed up. For example, Gobo #2, 3, 4, and 5 are all color scrolls, albeit different speeds. Same deal with Color. There's also about 6 or 7 different strobes--which turns out to be different flash rates. Why not just use a single strobe icon with an adjustment slider?
Topic

Plat 5r 17 chan profile help

cmb ·
I spent today programming scenses for 4 plat 5rs using the 17 channel profil on the product page. I'm trying to get the color scroll to snap to the next color instead of scroll but can't get it to respond. There is a button in the profile labels color snap yet it does not seem to function. Also is there a gobo snap?
Topic

Channel Assignment Q - Newbie

gorillastreetaz ·
We have an Elation Professional DMX Operator and (4) CMY Zoom 250's. My first question is regarding channel assignment. The CMY Zoom 250 manuals state "... is a 11 channel fixture, you should set the starting address of the first unit to 1, the second unit to 12, the third to 23, and so on." However the DMX Operator mentions 16 channels for each fixture. That would be fixture #1 = 1, #2 = 17, #3 = 33, and so on. So do I set the light fixture address to the Zoom 250 manual or the DMX Operator...
Topic

Recording Factory Chase?

jlivings ·
Hi, I am trying to record a factory chase #41(FC) using the SD-2. Pages 17-19 of the users manual cover most of this, However I can't seem to get the job done. The biggest issue is page 19 (FC), It states to select the Fixture(s) First,When I do that the selected fixtures "Stops"With no way to record. I know I must be missing something simple, Any Suggestions? Regards, John
Topic

Magic 260 - 22 channel light !

dmxnewb ·
Hi Not even opened the box of our new Magic 260 yet but I have started setting up the light personality using the Magic 260 software. This is our first venture into DMX Ok - we started out ordering a 15 Channel light but ended up taking a 22 channel light So, what I'm thinking is - two fixtures for each light - 16 and 6 channels. Simply use Fixt 2 to control channels 17 to 22. Messy, but it should work, shouldn't it ? John.
Topic

Appendix A?

sunspotwendy ·
The manual for Compu Live references an "Appendix A - DMX Review". However, I can't find this Appendix within the PDF. Is it available somewhere else on the web site? I got the manual here: http://www.elationlighting.com...e%20User%2010-17.pdf Thanks, Wendy.
Topic

T16 F Elation controller

harperjohn ·
Hello I recently acquired 2 Elation T16F light controllers. In the manual it states that it has 17 chase patterns and 7 fixed scenes. My question is, If any of the members are familiar with this unit,can you please tell me how do you program the " Fixed Scenes ". Any help would be greatly appreciated. Many thanks John
Topic

Program Closes when trying to trigger stack

michaelmoore ·
I might of found a new bug with the new release. When you go to trigger (not record) a stack (multiple cuelists) the program will consistently close on me. emulation 1.01 build 17 mac os 10.6.2 how to recreate the problem: - Press the “Stack” button - Press the “Go” button for each playback that has a cuelist you would like to trigger - Press the “Stack” button again to trigger the cuelists Thank you in advance!
Topic

Platinum Spot 5R - comparable to DS 575E?

kevinblinn ·
OK - I like my DS 575E's (although I'm on the forum because I was looking for a tech support solution that has hopefully been solved with a phone call and a PCBoard on its way.) As I was saying - I like my DS 575E's, and am starting to get excited about a lighter, cheaper, and 'comparable' Platinum Spot 5R, even without the CMY mixing that we're all hoping for. But what is comparable about the LUX numbers? 575E @ 15' beam angle and 16.6' throw measures 6630LUX or 616fc (source DS cutsheet...
Topic

Design Brick 70 II

wbrown ·
Just received our order of the new Design Brick 70 II. The DMX modes in the manual don't match the modes on the fixture. Through trial and error I've figured out: Color control - 5 CH MODE (DEFAULT) Color prog - 8 CH MODE Color_Saturation Hue Intensity CT - 4 CH MODE Color prog. Hue Saturation CT - 11 CH MODE Group Control - 35 CH MODE My questions, What is Pixel Grouping, and how does it work? I have a remote that we bought with our Design Bricks v1, will they work with the II (v2)? Thanks
Topic

Help with Venue LED Par 38

blubswillrule ·
This issue has to do with the personality profile for the light... it seems that it ALWAYS outputs a value of 32 to the 6th channel (confirmed via dmx monitor) I have read up on the exact function of channel 6... which is 0-31 NOTHING 32-63 DIM -> BRIGHT 64-95 BRIGHT -> DIM 96-`17 DIM->BRIGHT->DIM 128-159 COLOR MIXING 160-191 3 COLOR CHANGE 192-223 7 COLOR CHANGE 224-255 SOUND ACTIVE Now thiere should be no problem, however no matter how many times I hit clear (on the programmer)...
Topic

Fixture for Phantom 50 LED Spot

offen93 ·
Hello, I´m new on this Forom and come from Germany! I need a fixture for the Movinghead -Showtec Phantom 250 Spot-. Here is the DMX Protocol: www.highlite.nl/silver.downloa...187_MANUAL_GB_V1.pdf (page 17-19) I work in the 8 and 13 Channel Modos! Can sombodey help me?? Thank you
Topic

Crashing

x-laser ·
Hey all - Like the package a lot. However, as I have been playing around trying different things I have gotten several incidents of crashing. I will post them here as they occur. I am on Mac 10.6.5 using Emulation V. 1.03.15. I don't know how much you need so I just copied like half of it and if I should do less just let me know. Process: Emulation [5314] Path: /Applications/Emulation.app/Contents/MacOS/Emulation Identifier: com.VisualProductions.Emulation Version: Emulation version 1.03.15...
Topic

Problem setting fixtures in DMX Operator

johnseamann ·
Hi. I'm new to the whole world of lighting, and I am having troubles configuring my DMX Operator with two ProDJ Digital LED PAR64 RGB cans. I have them correctly set to channel 1 and 17, and I can control them using fixtures 1 and 2, no problem so far. The problem is that as soon as I deselect, for instance, fixture 1, it won't stay on with the settings I just chose, but go off. Also, I can "blackout" each fixture by deselecting it and then turn it back on by selecting the correct fixture...
Topic

Easy Step Editor

sbc ·
I am recording an 18 step scene via the Easy Step editor. I got to the 18th channel with only 17 steps. Obviously I missed a channel somewhere. Basically I need to insert a new Step 13. Even if the cursor is on Step 12, when I click NEW STEP, it puts the new step at the end. How do you insert a step?
Topic

Platinum Spot Profile 17 & 24

newearth ·
I've tried to find these on the website but all I could find was the .rar file for compulive. Any help? newearthlighting@live.com
Topic

New to..DMX Operators

mark52 ·
Hi thanks in advance.. I just received my new Elation Operator, read through the manual,,, but I can seem to get individual control over the 3 lights I have. I'll give you all the info, the first fixture is a Mayhah (address 1) uses 2 ch,,, then Fusion FX Bar uses 5ch,,,,,, (address 17) then Galaxian 3D address 33 uses 5 ch I can get all the lights to come on one at a time when I push the "Scanner" button and push the sliders up for all the function on each light… Scanner 1 slider 1 turns on...
Topic

DMX + Zoom CMY 250 Troubleshooting Help Needed

gorillastreetaz ·
The Gear: Elation DMX Operator and (4) CMY Zoom 250's The History: 2 yrs ago these lights were sent to elation for factory repair. At that same time a new elation dmx controller was purchased. When the lights returned, the club had no one to set them up so they have been hanging collecting dust. I have pulled them down to see if I can get them programed. I am the soundman here and understand a little bit about the lights. But heres the scoop: I have not been able to get the lights to respond...
Topic

James Thomas Profile

d-lights28a ·
Jingles, Looking for a profile for an 11 channel James Thomas Pixal Par 44. http://www.pixelrange.com/pixe...ixelPar44-v1-58b.pdf Its the 11 channel 4+E option on the channel assignments part of the pdf. Need it for tonight if possible... Thanks, D
Topic

DMX 192 controller question

mocheesehead ·
Hello All, I am assisting my church in a lighting upgrade they are currently undertaking. I have been a lighting designer for the past 25 years having used mainly ETC consoles with an occasional Strand desk thrown in to make me crazy! We have approximately 20 Elation LED fixtures and a DMX 192 controller. I essentially have 4 groups of fixtures and each group will be assigned the same DMX address so each group will operate together. I have them all patched together using 3pin DMX cable with...
Post
×
×
×
×