Skip to main content

Tagged With "Artiste Van Gogh V1.3.3"

Everything
Reply

Re: scene setter 24 dmx channel addressing

Carl N ·
Luis, I have tried that numerous times. Granted , it has been about 10 years since I have used DMX lighting. My last controller, An Election was a breeze to address. This is my second Scene Setter 24 in four weeks. The first one my salesperson and I assumed was defective. Now, for many years I have used XLR mic cables and I am learning that they may not work with todays new lighting components. I am assuming there is quit a difference between XLR and DMX cabling... So, I presently have...
Reply

Re: scene setter 24 dmx channel addressing

Luis ·
Hey Carl, To assign the DMX Channels on "ADJ" branded version of the Scene Setter you will need to do the following: 1. Enter Program Mode by pressing and holding the Record button and entering 1, 6, 6, 8. 2. Enter Channel Assign Mode by pressing and holding the Record button and entering 8, 8, 8. 3. Once this has been done the display will read 001, you can now use the Up or Down button to select the channel (1-512) that you want assigned. 4. Once your desired channel is displayed, tap the...
Reply

Re: Compu Pro 06?

Jingles8302 ·
ok first of all when u got to ur "pages" page and u see the 3 little boxes? make sure all ur lights have a mark in the box that looks like a king crown. that will link all ur lights to work in the "master" page. now that all ur lights are lined up to work in the master page u can click on the master page abnd hit the new scene button and then click empty. and then when you edit it you will find that all ur fixtures are lined up ready to progrma all together for one nice synched effect. yes...
Reply

Re: gel color in 3d visulizer

homeboy ·
For Compu Pro 06 You need to: 1. Open program and 3D visualizer 2. Enter build mode on the 3D visualizer 3. Select the fixture(s) u want to change the color of 4. Select the color on the pallet To help find the buttons...
Reply

Re: need to know???

Jingles8302 ·
hey guys im doin it now but i find cause i have three reds in this fixture i think i does not sem to want to let me use 3 of em just two! also am i to click on the channels and enter in the numbers and signs for the channels patched to several diffeent outputs?? so for example that says 1= 0+1/40/60 and i enter in that in the box?? am i doin this right??? help me!! peace! jingles out!
Reply

Re: Upgrading to DMX operator 192- need guidance!

Jingles8302 ·
ok i will make this quick but if u need more info please ask! 1: yes it will. internal memory and that is what dmx boards do mainly. save show data. 2: nope! 3: no u cannot if u want ot do that get compuware. just my sugestion i love compuware. 4: i dunno the exact term if ur lights dim get the dpdmx20L if u just want to switch them off and on get a switch pack. peace! jingles! lighting guru! LOL
Reply

Re: Show Designer 3, Fixture Profiles

elationpro ·
Hi David, Check out this download when you get a chance, it's the Showdesigner 2 and 3 library creater. You can easily create your own profile. SD LIBRARY CREATOR Best regards,
Reply

Re: Opto Branch

elationpro ·
TAP is correct. However you should have both 3 and 5 pin outputs. If you get a 3 to 5 pin turn around you can actually use all 8 outputs making it an OPTO BRANCH 8. works great.
Reply

Re: Stupid Question but help

deleriousfishman ·
thanks mate. u are a great help. well its 4 30 am here so i am off to bed and when i get up you will be sleeping so i wanted to ask u a couple more things i can check the answers to later and if you could answer them then it is much appreciated. 1. i accidentily crossed off the real time screen that shows you the stage and your light show how do i get it back 2. how do i add music to the programme 3 how do i set the lights to follow the music jingles i cannot tell you how grateful i am to...
Reply

Re: Stupid Question but help

Jingles8302 ·
ok gn. del. 1) you se in the pic i posted at the top the lil circle with "3D" in it. click that that will re load ur 3d viewer. it looks like this: 2) your gonna want to use the program that comes with the emo called "easy show" it should be on your desktop. 3) to synch the lights to the music u have to first program some scenes and name them or just remember which ones they are. i use the master page alot for this. this is a really deailed part of programming on compuware. maybe i wil make...
Reply

Re: Magic 260

surgeprotech ·
Domi, 1. 1.02 is currently the latest version. 2. When using a preset, the fixture profile must match the fixture. What fixture are you controlling? 3. You'll need to initialize the channel names. When opening the Magic 260 uploader program, close the Ulink Ver 1.08 window. Go to show forms (located on the top left corner) and select EditChName. Select Init and save. The Channel names will now appear when creating a profile. Please call me if you continue to have any problems Sergio C.
Reply

Re: Compu Live Questions

Jingles8302 ·
hey and welcome to the board. well i can tell this is gonna be a long post for me lol! now i acn answer most of these with ways that have worked for me but we should also see what elation says about the best way ot do some of these things. 1) you can assign a fader to adjust the speed of each individual button u have created by right clicking on the fixture page or if u have it in a master scene the master page scrool down till u see live toolbar button. u will see a size and dimmer andspeed...
Reply

Re: Compu Live Questions

matchless1 ·
Jingles, Thanks for your help. I tried what you said, and here's what I found: 1. I do have my Cycle created under the Master page, so I tried using the Live Toolbar Button. I do see the size, dimmer and speed controls, but only when I have a scene (like Blue) selected. When I click my "Cycle 1" button, the size, dimmer and speed controls disappear and are replaced with the text: "Cycle: Cycle 1". It's like all of those features are being disabled b/c I'm running a cycle instead of a scene...
Reply

Re: Compu Live Questions

matchless1 ·
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply

Re: Compu Live Questions

elationpro ·
Brian, I am really impressed on how you picked everything up. So to move forward, you can achieve the tempo your looking for by activating the Audio function in Compu Live. Step 1. In the "controller" drop down menu look for "Starting parameters". Then in the Options box, choose "Audio/Midi" and in this new window, click on the check box with the speaker icon. Then close all windows. You will be prompted to restart, and the Audio Analizer box will open automaticly. Minimize this for a...
Reply

Re: Help with buying the best controller

elationpro ·
12 par 64, 4 trackspots and 3 martins, puts you at 19 intelligent fixtures and 16 conventional fixtures. It sounds as if you buy the operator, you can get away with using the operator and nsi 6128 and not use the universal controller. Or if you want to go with one board, you will need the SHOWDESIGNER 3. If that to big, you may want to consider Compu 1024EC. Not many consoles offer controll of 16 par cans with moving lights.
Reply

Re: Help with buying the best controller

is-real ·
Thanks. now, as far as lightning..i've got not very much experience. i'm trying to light up a stage which is 30ftx20ft. my setup will be, 8 par cans on the back, 2 scanners on the back each one on the sides, 3 colorplash jrs on each side of the front towards the band an the other 2 scanners in te front facin each other, so they'll cover the band and the audience... what do you think? will this give me a nice coverage, im specially concern with the coverage of the LEDs.. don't know if theyll...
Reply

Re: Design 36 LED

pulighitng ·
switch 7 and 11 on for stand alone mode. 1+7 on = program 1 2+7 on = program 2... All of the programs except #8 (seitch 1+3+7+11) have a strobe part that makes the program look bad. If this is intended then it seems like a mistake.
Reply

Re: Design 36 LED

pulighitng ·
My units are 6 channels like the manual says. 1= red 2= green 3= blue 4= FX 5= strobe 6= dimmer .I have had them on an Avolites Pearl, a strand 550, a Elation Magic 260 , a dove systems IQ512 and a Baxter systems pocket console. I love the light and am using them on a bunch of shows but as far as the internal programs go they are not performing in a manor that is suitable of a professional quality unit. Is it possible to upgrade the chip to function in seven channel mode? I also have 6 of...
Reply

Re: Design 36 LED

serraava ·
I have the same problems as well with a few Design LED 36s I just ordered. Great lights, but the standalone programs have strobing in them as well as the internal programs via DMX. Also, according to one of the paper manuals I have in front of me right now, there are two DMX modes. The first is 6 channel mode: R, G, B, Programs, Strobe, Dimmer. The second mode is 3 channel mode: R, G, B.
Reply

Re: Design 36 LED

serraava ·
That just explains channel issues, not the strobing with internal programs and stand alone. The revision of the manual is from 12/06, and the 7 channel list is from 5/07, so the manual has yet to be updated for 7 channels or 6 channel lights are still being made/sold. What I stated is merely what was in black and white in front of me and what was sent with the product. It is also quite possible that PU lighting has an older, 6 channel version of the light and not the 7 channel. I know that...
Reply

Re: Design 36 LED

pulighitng ·
I have a great idea Jingles why dont you tell us how to put them in seven channel mode. My options are 3 and six and it does not matter how you address the control if the light can not be put in seven channel mode itself. I am standing by to buy 20 more units but it is now a long stand by.
Reply

Re: remote Lamp kill for power spot 700CMY

Jingles8302 ·
i believe in the manual it says if the shutter is closed or off and u have the value of ch. 22 i think to the lamp off function if u wait 3 mins it will shut off. have you tried that? peace! jingles.
Reply

Re: Design 36 LED

pulighitng ·
John and Ron , Thank you for your help on this problem. I am excited to hear that this might have a simple solution. I know that it is hard to please everyone with pre program effects but I feel strongly that this was a design flaw, and not just my picky personality trying to have my cake and eat it to. Given the time I would often write my own effects but when it comes to the people I am renting these units to just having them change colors without the strobing would make life allot easer.
Reply

Re: Fixture Profile for ADJ Dynasty Scan DMX?

Jingles8302 ·
NP glad to see we are both up late. lol it is 3 am here in WI lol. peace! good night lol jingles.
Reply

Re: Playing Drums and Triggering Scenes - Can I Do It?

losjonz ·
Hi Folks, Making progress on this. - Got my scenes created and put them in a cycle. - Set my scenes to "Go" within the cycle - Right Mouse clicked on Master, then clicked on Settings - Selected "Trigger" from Extern Action and trigger box - Up came a table with tiggerable events. Did the following: X 3. Go to next scene (PGDN) Midi Channel X ALL Midi Note X 3 *Also did the same with 4. (PGUP, Note 4), 5. (PAUSE, Note 5), & 6. (PLAY, Note 6). - Then hooked my Roland PAD (Octopad II) to a...
Reply

Re: Octopod 80 with Magic 260 profile?

elationpro ·
Hi Lemon, Yes.. right now, you can control each pod individually. if you use the 48 ch. mode. So each pod will be 6 channels each. So pack 1 will start at 001 pack 2 will start at 049 pack 3 will start at 097 Ch 1 is rainbow ch 2 red ch 3 green ch 4 blue ch 5 strobe ch 6 chase If you use ch 6 to engage a chase of which you have 8 chases. ch 1 becomes speed time, and ch2 becomes fade time.
Reply

Re: Lighting Newbie

tylerherron ·
@JPal Congrats on getting you accu spots working. now for the dimmer pack. This particular pack has 3 modes (as you already know) 1 channel, 2 channel, and 4 channel. Here is how they work: 1 Channel This setting allows all the lights plugged into the pack to be turned on/off using one channel. Meaning that if you set your pack to 1 channel mode and the address is at A129, when you turn on that fader all the lights will come on. 2 Channel This setting allows the four channels to be turned on...
Reply

Re: Need .SSL file American DJ Revo III

elationpro ·
This is an easy one guys. create a profile in the 4 ch mode. ch. 1 = mode.. do you want to be in pattern mode or chase mode. You can select this using ch1. Ch. 2 = the pattern or chase your secting. Ch. 3 = speed of either the pattern or chase. you need to select this after you select a pattern or chase. ch. 4 = dimmer.. if you don't have the dimmer on full then you wont see any pattern or chase. The 10 Ch mode is confusing.. I put a call into the ADJ pros and waiting to here back. Best regards,
Reply

Re: Stage Pak 1 how to set up?

tylerherron ·
Oh man I can't tell you how much I laughed at that! Ok anyways, DMX, it really is a cool thing. Here are some basics. DMX stands for D igital M ultiple X . It is a way for each and every (DMX Compatible ) light, made by any manufacturer, to interact with an universal DMX controller. In a standard DMX protocol (called 512-DMX protocol) there are a total of 512 "channels" In order to get your lights to interact with the controller, you must address them. There are 2 ways (that I know of) that...
Reply

Re: Stage Pak 1 how to set up?

Jingles8302 ·
on a side note. your spot 250 uses 6 DMX channel and the vue 3 uses 9. 9+6=15 DMX channels total. so you only have room for maybe one or two pars on the stage setter 8. might want to look into a bigger controller. like jthtigers DMX operator 192.
Reply

Re: Color blast 12 profile for Magic 260

lemonjello ·
wow, thanks for answering none of my questions. Any profiles for the magic 260 for CB 12's. simple 3 channel, no strobe/fade funct. They work similar to octopod 80's. the pds 750 auto addresses fixtures xxx, xxx+3, xxx+6 etc.
Reply

Re: Wireless DMX problem

tylerherron ·
Ok, I'm assuming you are using the Elation W-DMX products (since your posting in the Elation forums!) The manual is kinda confusing but I think I may have worked it out. Here is the excerpt from the manual that I read and this is where I came up with this fix. Tell me if you have already tried it: So what this tells me (very vaguely) is that to fix it, you may need to do something to your transmitter. Since your receiver is showing solid red, that should mean it is "free" According to the...
Reply

Re: EasyShow

nickcarbone ·
IBM Thinkpad 2.4Ghz CPU 1GB Ram 40gb HD barely used Video Card is onboard and probably crappy Windows XP 2005-ish 12-21-07 CompuLive The show ran great yesterday as well, playing through 3 different shows changing tracks no problem with no glitch or skip... just that one time it happened worries me.
Reply

Re: OPTI 30 RGB

serraava ·
Problem is jingles that your middle men don't do their job real well. I can tell you I ordered a PS575, within one month, the lens in the front had fallen out, and the dimmer didn't work. It also had a few other issues. They sent my advanced replacement out late, despite saying it would be there a certain day, and because it that, it hurt a show I was doing and lost money on it. About 6 months later, I ordered 2 PS575IEs. One light, 2nd show I used it for, about 3 weeks old and under 50...
Reply

Re: Riva 80

rain ·
Think it was you who posted these: http://www.alia.com.au/links/dmx-faq.htm#3 http://www.dmx512.com/web/light/dmx512/index.htm
Reply

Re: DMX Operator Pro

Jingles8302 ·
OK WELL THE PRO BLOCKS THE FIXTURES IN 16 CHANNELS EACH. THAT MEANS THAT FIXTURE BUTTON ONE CONTROLS CHANELS 1-16 AND FIXTURE BUTTON CONTROLS 17-32 and so on and so on. so if you wanted to put 1 led one each fixture button they would need to be addressed as follows. (assuming they are 6 ch's) led 1:001 led 2:007 led 3:017 (that would be on fixture button 2) understand where im goin with this? if you have dip switches here is a helpfull tool DIP SWITCH CALCULATOR Sincerely,
Reply

Re: black lights

serraava ·
Continuing on now: The buzzing noise is known as lamp sing, it's caused by the power being turned on and off really fast. The way this is fixed is more expensive dimmers have what is known as a choke after the SCR so the power change is as dramatic as on/off. The better the quality of dimmer, the less lamp sing you will get. Now why non-dim isn't really non-dim. Despite you setting a dimmer to non dim, either via the pack or the console, the power still passes through the SCR and choke. So,...
Reply

Re: problems with power spot 575?

dannyb ·
I forgot to ask you about the power wash that i have i have 3 machines for the stage everytime i use the chase for the colors the color wheel of one or another gets a mix of different colors. so when i finish using the chase and i want to wash the stage with just one color.. one or two machines will give diferent colors.. i have to reset the machine get all the colors back to a regular order.. is it a signal problem or the machine itself?
Reply

Re: The Light Network

tylerherron ·
yeah ive been over there a little bit. I've been extremely busy for some reason. I have a wedding to film tomorrow, 3 videos need to be edited, a little homework, some applications, church stuff, and some more things that i can't remember but i have written down somewhere. jthtiger
Reply

Re: basic console programing

serraava ·
Depends on the show Drew. More complicated shows generally have time to program, and its just like Elation_Pro said, someone hitting 'Go'. Sometimes, it is linked to time code, so no one is even hitting go. Cruise ships are a good example, all the shows run off of time code, and the show starts when the sound guy hits play. The fun shows are the ones you have no idea what you are getting into. It is even more fun with movers. Running movers on the fly is often called busking. More powerful...
Reply

Re: SS8 Question

serraava ·
Jingles is correct that it is in the impedance of the cables. DMX is 110 ohms standard. The protocol also calls for 5 pin cable, when it only uses 3 wires. It was made 5 pin originally for expansion, so you could have 2 pairs running down one cable, or for other data of some sort. DMX is dieing however, so it will never be expanded to use the extra pins. Also, for longer runs, Jingles is right that you should only use DMX. You can however start to see problems with mic cable vs DMX at any...
Reply

Re: need help urgent

abhi ·
Jingles thanks for the reply i am using show designer 3 and i cant find the 2 channel and 9 channel profile please can u help me thanks in advance
Reply

Re: need help urgent

abhi ·
sorry elation i cant get on line.....i found some personality from net and i try to lod it it is showing NO FILE FOUND ..and the light i am using for our show is coustum made and they have only 2 and 9 chanels and i am new with SHOW DESIGNER 3 And in this forum also thanks for u r message hope some one can help me
Reply

Re: Read the manual and still don't know what to do

Jingles8302 ·
Hello. welcome. on the op 192 the 12 fixture buttons hold a total of 16 DMX channels each ok? so if u have 3 fixtures and u want each one of them to be on a separate fixture button the first fixture will have to be addressed to 01, the second to 17, the third to 33. let me know if this helps you out at all. ok? sincerely,
Reply

Re: General uplighting for sanctuary - suggestions?

rain ·
I can't. Im at the tire shop putting new ones on the work van. Just happened to have the store laptop with me and an ethernet cable. Otherwise I'd be stuck watching Christy Yamagoochie on the only TV station they get in this place. HAHAHA! But yes, seems the 2 options are either a low profile up-light from the crown molding along the sides, (traditionally churches put florescent bulbs here), or some sort of tiny can(or long thin) fixture on each beam washing down on the congregation.
Reply

Re: Power Distribution Help

ramtek ·
Hello Justin: There is no easy solution to this issue. What you need to determine is what do you use the most. Some people use 3 phase others use only single phase. Typically Hotel ball rooms small dance halls, etc. will only have single phase. Larger venues like arenas, convention centers, stadiums will have 3 phase. What venues do you typically do shows in ? This question will help you decide what to wire your power in for. Ramiro Elation Lighting
Reply

Re: Power Distribution Help

esteban ·
leprecon just has it listed as 4-pole-3 phase/1 phase mains breaker there is a 3 pole option too, best bet is to call a dealer to find out for sure. this is a link the the pdf of the distro page so at least you can see a picture of it. http://www.leprecon.com/productfiles/PwrDis.280061B.pdf
Reply

Re: RMD-620

elationpro ·
Audia, I just saw this post.. are you still having issues? It sounds as if you need some DMX help over there. Using the fixture patch you should have the address of the fixture in the SD2 match the address of the dimmer.. If you not sure what the address is, the address is a 3 digit number that dimmer must have.. then a fixture button on the console should have the same 3 digit number. If these numbers don't match then you wont get any response. If you can't figure it out then we will need...
Reply

Re: DMX Duo

lightech ·
Not to rob Jingles of business, but I think it would be beneficial for you to just buy a small DMX controller that will allow YOU to program your own scenes and chases. For one, you will learn a lot about DMX lighting and how to accomplish many different things. Plus, you will be able to modify, remove, and add to your current banks of scenes and chases without having to rely on someone else providing designs for you. You will then know how it all works inside and out, plus have the...
 
×
×
×
×