Skip to main content

Tagged With "Firmware V1.12"

Everything
Reply

Re: Magic 260 - 22 channel light !

dmxnewb ·
Thanks for that. Well I have the 260 in my hands now so checking the profiles I have created... One strange thing happening - Ch11 is not used on the fixture no steps or values. When loaded onto the 260 it is shuffled along to the channel 16 position. No lights yet to see if channels 12 to 16 work correctly John
Reply

Re: CueCable drivers for Vista and Windows 7

harvest101 ·
I think I got it, but now I have run into another problem. The lights I am using are not on the list. I am using 12 Venue led64 led pars and 2 Amer. DJ DJSpot250 (I found those, but not the LEDs) Is there a profile that you can send me to help me out? Im not that skilled on the computer to create (not yet) Thanks for your help.
Reply

Re: another noob question.....

johnhrv ·
Sergio, I have an Scene Setter 24 ch connected to two ETC Smartpack wall mounted dimmer panels. SS24 outputs 1-12 go to 1st panel with 12 dimmers and outputs 13-18 to second panel with 6 dimmers. The SS24 outputs are in sequence but actual light wiring to dimmers is mixed. How can I assign sliders to match the phisical light configuration (as suggested in your remarks)? Or do I need to rewire the dimmer panels to match SS24 sliders? Johnhrv The existing
Reply

Re: another noob question.....

johnhrv ·
Sergio, Thanks for your reply. I am not at our church to check the DIPs but all 18 outputs are working now using DMX. No the slider channels have not been changed. BUT, that is what I want to try but cannot find instructions. Can you direct me to a source of instruction for changing slider output channels. My other option is to re-wire the ETC Smartpacks. My objective is to get the SS24 sliders in the same order as theater lighting fixtures (now mixed). johnhrv
Reply

Re: Buggy MAC version

rayco ·
Have just checked out Build-12 Seems they have fixed the problem of the faders on sub-masters all being up BUT not the FOG, STROBE & BLINDERS all latch ON !!!
Reply

Re: HZ-300 concerns

studio42 ·
More updates. Just odd things. Sort of leading to a "ghost in the building" sort of thing. 1: OK, my day got way screwed. Depends how you look at things. I have to cancel a lot of things based on other things and then cancel more things based on still more things and now I gotta cram a lotta work into a little time because some dumb dink decided to hand off a project she didn't want to really work on in order to get lazy on something else. Just riddle me this: How the f*&$ am I supposed...
Reply

Re: Buggy MAC version

rayco ·
Select any fixture and click 'copy' and it crashes. Nice if you hit that by accident at a concert with 6,000 people watching a live band as we will have this Saturday. Very expensive for the pleasure of being a tester. PS - Your link says Build.14 and the program says b.12 in 'About' box it says; 1.02.12 (1.02.9) I think this is build.12 not 14
Reply

Re: Help me Jingles! (its Rain)

rain ·
Close - They have profiles for Colorado 2 and Color Dash Batten. Nothing for the Colorado 1 Tour. And for some reason the 11 Channel fixtures are listed as 12 channel ones in the profile list.
Reply

Re: Help me Jingles! (its Rain)

rain ·
Also - (thought this would be an easy one to set up but Im stumped) How do I create a profile (or locate one) for a simple 12 channel DMX dimmer?
Reply

Re: Help me Jingles! (its Rain)

Jingles8302 ·
a 12 channel dimmer pack profile aswell as a chauvet colorado tour 1 6 ch mode profile has been sent yo your email. Sincerely,
Reply

Re: Starting New Business

elationpro ·
Hi NewEarth, The main challenge is control. At this point stay away from lamp par cans. to hot and to much power consumption. For your A design. Add Qty 12 OPTI TRI PARS - LED PARS Qty 6 DLED TRI BRICKS - LED BRICKS WITH EFFECTS Qty 12 OTPI TRI 30 - Mini LED PARS for uplighting if needed. Qty 2 X-310II - Fazer Qty 1 COMPU CUE - OR - SHOWDESIGNER 2CF This is about $15K if that. So if you have more $$ buy Qty 8 DLED 60 TRI STRIP FOR SCENIC/CYC lighting and visuals. For your B Design You can...
Reply

Re: Visualizer help

sasquatchproductions ·
Hey James, hope your holiday was good! Got to work a bit with the viz over break and everything is working well except for the colors on some the fixtures that i added in. Every color is coming up green, and I've tried using High End Trackspots v1 and high def profiles and am having the same problem. Not that it worries me with the viz, but im more concerned that i have the right profile foe the fixtures at the venue. Is this just a glitch or do you think I may have a problem? Thanks in...
Reply

Re: Generic moving head Fixture

Jingles8302 ·
Is there anyway you can tell us exact dmx values? For example channel 1 0-12 is say like gobo open etc? We will need much more specific values for all the channels in order to build a profile correctly for you. Also we will need some sort of name for this fixture. It can be anything. Even your name. What would you like us to call it? Welcome to the forums. Sincerely,
Reply

Re: Who supplies Elation's gobos?

5tiffler ·
Eventually I'll want enough for 12 DesignSpot 250's, although we only need 6 right now.
Reply

Re: Co Pilot II Configuration

djchad72 ·
Also to clarify, here is the button to relay power pack mapping, I am assuming. button - power relay left - 1 - 1 left - 2 - 3 left - 3 - 5 left - 4 - 7 right - 9 - 1 right - 10 - 3 right - 11 - 5 right - 12 - 7 Again, thanks ahead of time for anyone who can help confim. Since my setup/test time will be right, would like to minimize the amount of re-planning I will have to do.
Reply

Re: Lights doing there thing

harvest101 ·
Ok. Im at a loss. I am still having this issue. I have updated my software, I have bought boosters and I still get the same results. After a short amount of time, all my lights stop working and I have no control. Here is what I have: I am running from an HP 64 bit laptop to two dimmer packs then connected to a booster that splits to 12 64 par Venue LEDs and three DJ spot 250s and then to a second booster that has the same on the other side of stage. Everything works if I don't stop making...
Reply

Re: API Available for Compu Que?

chrisc ·
I have the Compu Cue (with three black buttons and two digit led display). Just received it a few weeks ago. I downloaded ESA from web site. It shows file date of 12/1/2008 and the "About" box shows October 2008. The Compu Show version shows Jan 18, 2011 in the "About" box. The drivers were installed when Compu Show was installed. When I run ESA, it doesn't recognize the USB device. Have to start in "Demo" mode. Is there a newer version of ESA that I didn't see on site? All of our...
Reply

Re: xlaser profile

Jingles8302 ·
http://db.tt/6jn1KT4 Try the profile from the link above. All it says is sky writer 12 channels. Sincerely,
Reply

Re: help with building a matrix

wheresjc ·
OK Here goes. As of the last beta of CompuShow I tested, the profile editor still did not allow for a fixture to have multiple R, G, or B slots. Therefor, you can patch a matrix with the full profile but the effects will only work for pixel 1. (Very few console manufacturers have this capability built in to their consoles as of yet.) Build a Matrix of 3 Channel RGB Units. It can be handy to open a 3 channel LED fixture profile in the PROFILE EDITOR and name it Pixel and save it as Pixel.
Reply

Re: Channel Assignment Q - Newbie

hobson ·
You have to use the assignments mentioned in the DMX Operator manual. When you do that faders 12 - 16 won't do anything (because your fixture only uses 11 of the sixteen available per fixture), but that is OK. Each fixture button will control each CMY Zoom the same.
Reply

Re: Need Profile Please

Jingles8302 ·
Vizi spot led 12 channel mode. http://db.tt/k272FhM Sincerely,
Reply

Re: How to decide on lighting controller

maw ·
We are spending approximately $8,000 on lighting including 12 led par 64s, 3 mini moving heads, 5 colour led bars, follow spot, mixing board, dimmer packs, haze machine. We are also doing some sound and video upgrades for a total of approx $20,000.
Reply

Re: Plat 5r 17 chan profile help

cmb ·
If my 12 year old martin mini macs can snap to the next color....then I expect these Plat 5rs to. I see the disable fade option for the color wheel and will test tomorrow.
Reply

Re: need profile for High End Trackspot

dunn ·
v1 high resolution
Reply

Re: Profile for Chauvet Qwash 260 LED

Jingles8302 ·
I only saw 12 channels in the manual so here you go. http://db.tt/4bQavPfG Sincerely,
Reply

Re: Profile needed for American DJ Vizi LED Spot

sdman ·
This is a 12 channel light. The profile can be downloaded from the SD2 page of the Elation web site.
Reply

Re: Profile needed for American DJ Vizi LED Spot

ccawthon ·
Ken, I downloaded the profile and took a look at it in the fixture editor and noticed the profile and the channel listing in the manual don't match up. They differ as follows... Chan. Vizi Spot Manual - Profile (from elation website) 1 Pan Movement 8bit - Pan Movement 8bit 2 Pan Movement Fine - Pan Movement Fine 3 Tilt Movement 8bit - Tilt Movement 8bit 4 Tilt Movement Fine - Tilt Movement Fine 5 Color Wheel - Color Wheel 6 Gobos - Gobos 7 Gobos Idx/Rot - Gobos Idx/Rot 8 Rot Prsm/Gobo Macro...
Reply

Re: Profile needed for American DJ Vizi LED Spot

sdman ·
The manual you have linked to at the top of this thread is for a 12 channel light that matches the profile. You must be looking at a differet light that is 14 channel.
Reply

Re: Design 12 brick profile needed

serraava ·
Hey Amen and welcome to the forums. If you are looking for a Hog 3 profile, it is already in there as LED 12 Brick. For Hog 2, there is no profile. You can set them to 3 channel mode though and just use a Generic CMY Profile instead. Cyan would be red, Magenta would be green, and Yellow would be blue. Hope this helps.
Reply

Re: I just don't understand DMX please help

Jingles8302 ·
Aww ok. no problem. 2 questions: 1) do you have any elation lights or ADJ lights that you are trying to use with this controller? Just seeing if there is any real reasoning for helping you out as your controller is not one of ours unless I am not correct on which controller you have. but if it is not Elation or ADJ we really don't "support" it, get what I mean? 2) give me a link to your controller. So but for example the ADJ DMX operator 192 provides 192 of dmx channels for a user to...
Reply

Re: Design Spot 300 Pro discontinued?

brianwalsh ·
I just tried to buy 12 more in Australia but was told by the importer that Elation had no stock I managed to find 10 used fixtures on Solaris but would still like to source 2 more, especially if they are priced to run out.
Reply

Re: Compu Live Fixture Grouping Problem

Jingles8302 ·
Here you go. there is no sound but I added some text captions. Hope you can get the idea. But watch it in FULL HD (1080p) and full Screen too. in the video I used 12 flat par profiles in 4 channel mode. And I grouped the RGB wheels in groups of 4 fixtures. You can group them as many or as few or even individual if you want. Play around with it. Any questions let me know. Sincerely,
Reply

Re: SceneSetter 24 DMX assign mode not working

benben ·
I'm not sure what brand the dimmers are, but they are 12 channel. The start address of the one that does house lights is 1, the stage light dimmer starts at 13. I've sent you an email.
Reply

Re: DMX 192 controller question

hobson ·
Pat, The manual isn't particularly clear on this point. Give this a try: Set the DMX channel of all the Group 1 fixtures to 1, Group 2 to 17, Group 3 to 33 and Group 4 to 49. Now, assuming all the fixtures in each group are the same kind of fixture as the other fixtures in that group, you will be able to control each group as you would like. For example, if all your fixtures were simple 4 channel fixtures (red, green, blue, brightness), when you select Fixture 1 (from the left bank of 12...
Reply

Re: Profiles Needed

d-lights28a ·
The Q Wash is actually 12 channels in advanced mode. Thank you
Reply

Re: Design Spot 250 Reverse Display

JWPardee (Guest) ·
go into your menu, page down to the 12 page (DISP) select it, you will have three options VALU, D On, Flip select FLIP...on flips it 180, off resets to normal... Should help you out boss
Reply

Re: American DJ Mega Tri Bar

Former Member ·
what mode? there are more than one dmx mode you can run this on. Mega Tri Bar 7 DMX work modes (2, 3, 4, 6, 7, 12 & 54 channel modes) this might be why only part of your fixture is responding and the other part isn't. check to make sure that the software as well as the light are set up for the same mode.
Reply

Re: American DJ Mega Tri Bar

Former Member ·
ok so you are running it on 12 channel mode?
Reply

Re: American DJ Mega Tri Bar

Former Member ·
mode 6 is 12 channel mode. you need to change the profile on the software.
Reply

Re: Firmware fail on Magic 260

rockinlighting ·
I got rid of all my Elation and American DJ gear and went to martin sold all 12 of my Elation Platinum Spot LED II for 16 Martin MAC 250 Kryptons. Also Moved to Jands Vista Software and consoles S1 and M1. They actually can out and gave me a 2 day One on One course on how to use it. I have had no problems with any of this Pro stuff. now I can make a show not be a shipping department getting my stuff repaired all the time costing me money
Reply

Re: No interface detected

ano ·
i have instal the new compuschow last relase. 6-12-2013. but now doesnt work my interface.... im use the COMPU CUE BASIC. excuses me for my bad english... someone who speaks Dutch mail me: zwiers_harold@hotmail.com
Reply

Re: Profile needed

dj-luis ·
Is this what you need ? Or you need the manual? How can I send you the manual ? It can also be used in 24 channels too. 1-Pan 2-Tilt 3-Speed 4-Lamp on at 130.139 5-Colors 6-Nothing 7-Gobos 8-Rotacion Color wheel 9-Rotation Gobo Wheel. Fine set up 10-Prism 11-Rotacion Prism . Fine set up 12-Frost 65.255 Cierra el open gobo 13-Zoom 14-Focus 15-Strobe 16-Dimmer.
Reply

Re: Newbie question

serraava ·
Sorry for the late response on these question guys, I will try to explain DMX addressing now. The best way to describe DMX addressing is that it is like the postal system. First, you pick the address you want to send the letter to. Then the letter goes to the mail center, where it is sorted for delivery. Next, a mailman takes the letter and delivery's it to the address. The first step in setting up DMX system is you patch your console (Pick the address you want to send commands to). Since...
Reply

Re: Setting dip switches

elationred ·
@billyboy, let me jump in. The DP-415 has dip switches based on the binary code standard. This means that each dip switch is double the value of the one before it. If you look at the image attached (DP-415 Dip Switch. will see the 10 dip switches and above it the values that each creates. Switches 1-9 can be combined in any configuration to create a number from 1-512. This will represent the starting slot (sometimes called an address) of the DMX signal that the pack will respond to. Because...
Topic

ADJ Ultra Bar 12 Profile Available?

Tabernacle Baptist Church ·
We lost the patch originally setup by an individual no longer available. When trying to add a patch, we do not see the ADJ Manufacturer for the Ultra Bar 12. The lights use channels 63, 57, and 75. We are unable to find these in the list. Can this be added to Emulation? Thanks! TBC
Topic

New profile for SD3

truwrshp ·
How do I get a fixture profile for a new one I have. I have attached the user manual. I want to use the 16 channel set up.
Topic

Blizzard HOTBOX exa Profiles

John Leonard ·
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic

Spot Briteq BT-Theatre 60FC Black LED theaterspot

Technican ·
Spot Briteq BT-Theatre 60FC Black LED theaterspot I have got an demo. The spot Briteq BT-Theatre 60FC Black LED theaterspot is very good. We want to buy 10 of them but without fixture we can’t use them with Emulation. Can you do the job? If we have the fixture, how can we update Emulation with teh fixture, Best regards, Deschamps Koen.
Topic

Platinum Spot 35... Just... shoot me now

Allen Stevens ·
When this club opened, it could have been an Elation crown jewel showroom. I think we had 24 each of the PSpot35's, PSpot 15 Pro, PSpot 5r Pro as well as several dozen PBeam 5r and 12 PBeam 15's. Also an impressive array of Event Bars, 32 in all. Despite a fairly dedicated crew and regular maintenance schedule, fixtures started dropping like flies within the first year. Warranty repairs were spotty, but they happened. Then everything was out of warranty, and the real carnage happened. Coming...
Topic

DMX address in 2/8 or 2/12 mode for Chavet

John Pringle ·
For the Elations 8 and 24 Trendsetter DMX 2 (9 or 13) in 2/8, 8/8 or 2/12, 12/12 mode isn’t recognized by Chauvet's EVE E-50Z (either in channel 1 or 3 mode). In fact, it refuses to work on any DMX channel other than DMX1. With the 1/16 and 1/24 mode DMX for all channels work individually as addressed. Is the Elations Trendsetter putting out an address which it’s not publishing? The other devices work on DMX 9 or 13 when in 2/8, 8/8 or 2/12, 12/12 mode.
×
×
×
×