Tagged With "Artiste Mondrian Firmware V1.3.7"
Reply
Re: DMX Operator Pro
OK WELL THE PRO BLOCKS THE FIXTURES IN 16 CHANNELS EACH. THAT MEANS THAT FIXTURE BUTTON ONE CONTROLS CHANELS 1-16 AND FIXTURE BUTTON CONTROLS 17-32 and so on and so on. so if you wanted to put 1 led one each fixture button they would need to be addressed as follows. (assuming they are 6 ch's) led 1:001 led 2:007 led 3:017 (that would be on fixture button 2) understand where im goin with this? if you have dip switches here is a helpfull tool DIP SWITCH CALCULATOR Sincerely,
Reply
Re: trackpod84
i copied this straight from the website so i am wondering why you cant map?????????????? Why we are at it I also noticed that the 7 attribute traits sheet is still on the Design 36 page? Full video pixel mapping control. LEDs are arranged in ten modules of 84, each of which can be divided into four individual sections. This provides a total of 40 pixels capable of running graphics or matrix when multiple units are used together.
Reply
Re: black lights
Continuing on now: The buzzing noise is known as lamp sing, it's caused by the power being turned on and off really fast. The way this is fixed is more expensive dimmers have what is known as a choke after the SCR so the power change is as dramatic as on/off. The better the quality of dimmer, the less lamp sing you will get. Now why non-dim isn't really non-dim. Despite you setting a dimmer to non dim, either via the pack or the console, the power still passes through the SCR and choke. So,...
Reply
Re: problems with power spot 575?
I forgot to ask you about the power wash that i have i have 3 machines for the stage everytime i use the chase for the colors the color wheel of one or another gets a mix of different colors. so when i finish using the chase and i want to wash the stage with just one color.. one or two machines will give diferent colors.. i have to reset the machine get all the colors back to a regular order.. is it a signal problem or the machine itself?
Reply
Re: The Light Network
yeah ive been over there a little bit. I've been extremely busy for some reason. I have a wedding to film tomorrow, 3 videos need to be edited, a little homework, some applications, church stuff, and some more things that i can't remember but i have written down somewhere. jthtiger
Reply
Re: basic console programing
Depends on the show Drew. More complicated shows generally have time to program, and its just like Elation_Pro said, someone hitting 'Go'. Sometimes, it is linked to time code, so no one is even hitting go. Cruise ships are a good example, all the shows run off of time code, and the show starts when the sound guy hits play. The fun shows are the ones you have no idea what you are getting into. It is even more fun with movers. Running movers on the fly is often called busking. More powerful...
Reply
Re: SS8 Question
Jingles is correct that it is in the impedance of the cables. DMX is 110 ohms standard. The protocol also calls for 5 pin cable, when it only uses 3 wires. It was made 5 pin originally for expansion, so you could have 2 pairs running down one cable, or for other data of some sort. DMX is dieing however, so it will never be expanded to use the extra pins. Also, for longer runs, Jingles is right that you should only use DMX. You can however start to see problems with mic cable vs DMX at any...
Reply
Re: Scene Setter 48 issues, less than 1 year
Oh No, We have had this controller for over 10 years (i think. . .at least 7). The problem is that when you push some of the faders up to 100% it skips down to 30% and flashes around. It is kinda hard to explain. You push it up and it hits 100 then jumps back and forth between 30 and 100. Does that make sense? We just need another one. About the 192 not being satisfactory, you would have fast control over lots of faders. All you would do is it one button, and then change the faders. There...
Reply
Re: A silly question about polarity on a Show Designer 1.
If you look at the showdesigner you have a picture of the pin with a half circle around it.. then a +2 on one side and a -1 on the other.. or something like that. Check out the Robo scan manual and make them match. I think since the Robo scan is old, they only put current fixtures on the SD1. You can use the modify fixture option to recreate a 7 chn. fixture and name it ROBO SCAN. Bset regards,
Reply
Re: Newbe Question
Great! Thanks. You shouldn't of offered for me to call, you may have to block me!!! Lol I am not new to Intelligent lighting, but new to DMX. I have always owned Trackspots and other High End Systems fixtures that had dedicated controllers. So I am starting forom scratch here. I would like to get a good basic show down before Prom season for me starts which is the 2nd Saturday in April. it doesn't have to be extremely detailed, just about 7-10 different looks. I look forward to talking with...
Reply
Re: need help urgent
Jingles thanks for the reply i am using show designer 3 and i cant find the 2 channel and 9 channel profile please can u help me thanks in advance
Reply
Re: need help urgent
sorry elation i cant get on line.....i found some personality from net and i try to lod it it is showing NO FILE FOUND ..and the light i am using for our show is coustum made and they have only 2 and 9 chanels and i am new with SHOW DESIGNER 3 And in this forum also thanks for u r message hope some one can help me
Reply
Re: dxm operator pro
32 max is pushing it. I generally start having problems with LEDs at 8 fixtures, depending on length of the run and fixtures in question. Dimmers, I daisy chain those things forever and they don't care, and I am talking racks upon racks upon racks. Movers, depends on the brand and length of cable in question. Some days it's 16, others it's 20, sometimes I can only get 6 on before the 7th starts acting up. If your last fixture in line is acting funny, and a terminator isn't helping, chances...
Reply
Re: Read the manual and still don't know what to do
Hello. welcome. on the op 192 the 12 fixture buttons hold a total of 16 DMX channels each ok? so if u have 3 fixtures and u want each one of them to be on a separate fixture button the first fixture will have to be addressed to 01, the second to 17, the third to 33. let me know if this helps you out at all. ok? sincerely,
Reply
Re: Power Distribution Help
Hello Justin: There is no easy solution to this issue. What you need to determine is what do you use the most. Some people use 3 phase others use only single phase. Typically Hotel ball rooms small dance halls, etc. will only have single phase. Larger venues like arenas, convention centers, stadiums will have 3 phase. What venues do you typically do shows in ? This question will help you decide what to wire your power in for. Ramiro Elation Lighting
Reply
Re: Power Distribution Help
leprecon just has it listed as 4-pole-3 phase/1 phase mains breaker there is a 3 pole option too, best bet is to call a dealer to find out for sure. this is a link the the pdf of the distro page so at least you can see a picture of it. http://www.leprecon.com/productfiles/PwrDis.280061B.pdf
Reply
Re: RMD-620
Audia, I just saw this post.. are you still having issues? It sounds as if you need some DMX help over there. Using the fixture patch you should have the address of the fixture in the SD2 match the address of the dimmer.. If you not sure what the address is, the address is a 3 digit number that dimmer must have.. then a fixture button on the console should have the same 3 digit number. If these numbers don't match then you wont get any response. If you can't figure it out then we will need...
Reply
Re: DMX Duo
Not to rob Jingles of business, but I think it would be beneficial for you to just buy a small DMX controller that will allow YOU to program your own scenes and chases. For one, you will learn a lot about DMX lighting and how to accomplish many different things. Plus, you will be able to modify, remove, and add to your current banks of scenes and chases without having to rely on someone else providing designs for you. You will then know how it all works inside and out, plus have the...
Reply
Re: Re-initializate Magic 260
Try this.(from the manual)....It WILL ERASE EVERYTHING !!!Gfuller2000 Section 30: Erase All Memory The next set of instructions will allow for ALL programmed memory, including presets, scenes and shows, to be erased in one shot. (1) From the main screen, press and hold down the “DEL” button then press the “ENTER” button once. Your display will read as follows: Select a menu item then press enter. - Lock/Unlock Memory - (2) Turn DATA wheel #1 clockwise so that your display reads the...
Reply
Re: Is there a 250 spot that will mix color like this?
Ok, last question before I go to bed. Since I don't have any moving head fixtures just yet it was hard to justify buying the software. However, I threw up some of DLED 36's and I can do some great effects with these that are not possible on my show designer 1. Ok tell me how to accomplish this in the real world. 1. I want to create a dimmer chase for Design LED 36's that I can save and then overlay on any of my other static DLED 36 scenes. i.e. Say I have 3 scenes programmed for my DLED's.
Reply
Re: What are some other uses for moving heads at weddings?
it depend on the location too. It amazes me the amount of money people put into weddings. We did this one HUGE set up with lighting. the wedding was in a 3 acre backyard. there was a pond with a water fall, tons of trees, a stage for the band, a huge dance floor and all the seating area. what we did was for every group of trees of 3 or more we would light with century colour 2500's. individual trees we used the design 250 (PR) . the pond and waterfall was all LED lit. front truss was pars...
Reply
Re: Newbie looking for help/advice
I will try out the compulive software thanks! I would also like/need a dmx unit to control all of it though. Woould you recomend one for the movers and one for the wash lights or both in one unit? How is this model : Elation DMX Operator Pro Controller? It seemed to have good reviews on other websites. Or is there one specifically that would best suite my needs. I need one that would simply turn everything on and off at this point, and a dimmer would be nice (But I believe you purchase those...
Reply
Re: Newbie looking for help/advice
Yes, what you are describing are what a console would call a scene. A Scene is just a bunch of lights recorded (saved) to look a certain way when you bring up that scene. So for example, if you made scene 1 nothing but blue lights, when you hit scene 1 the blue lights would come on. If you made scene 2 red lights, the red lights would come on with scene two. If you made scene 3 red and blue lights, both the red and blue lights would come on when scene 3 is up. A series of scenes is called...
Reply
Re: Newbie looking for help/advice
Yes, you have 96 pages that you can add to 8 different books in different ways for each book. The console doesn't say how many pages per book, so I assume you can use as many as you want. Don't quote me on it though. Sometimes you will see something like number of steps per show or chase. So if it says 40 Steps per Show, that would mean each of your books can have 40 pages in it, but you can make up 96 different pages to use in the case of the DMX Operator Pro. Don't think of CompuLive so...
Reply
Re: ETC Express Profile for Design Spot 250?
No problem. If you go to ETC's website, on their Express page at the bottom there is a section called related products. In that section, you can click on Expression Offline and it will go to a new page. Click on the download tab and in the Off-line Software section, you will see Expression 3/Express/Insight 3 Off-line Software. Download and install that. Then go to the menu which you installed it in and open the Personality Editor. It is fairly straight forward to use. Any problems feel free...
Reply
Re: Wireless DMX problem
Hi guys, The WDMX uses 2.45Ghz which has nothing to do with any upcomming auctions.. The Auctions are for frequencies not yet being used.. so this leaves the 2.45Ghz free. Elation decided to partner up with wireless solutions.. Wireless solutions is a swedish bases company that has the WDMX trademark and have been perfecting the WDMX for over 20 years. So although the WDMX is new to Elation, it has already been industry tested for 20+ years. For Licklider, I found that if you turn on the...
Reply
Re: Elation stage setter 8
First question, did you ruin the controller. The answer is no. If anything, you ruined the power supply, but that is also doubtful. You are talking 6 watts vs 3 watts, which is not a lot of power. Second question, just plug and play. You said they have been doing it for a while now, so I am sure you are still fine. After that, I think all your other questions are answered. Must components are capable of handling sightly dynamic loads. For example, almost everything can work on a load from...
Reply
Re: Fading to black
Thanks Chris, The only DMX channel I was adjusted was the DIMMER channel (channel 7 according to Magic-260). All other channels remained the same. The piece that eludes me is how do I get a slow fade between the scenes from full illumination to a black out and unfortuately the fade time did not appear to work. I did some experimenting and the only time I got the fade time to work is when I was repositioning lights from point A to point B. In this scenario I could use the fade to say do it in...
Reply
Re: design 108
You are correct bdunard in the fact that the Colorado is brighter then a DLED36 do to lack of a diffusion filter. I did a side by side of an Opti RGB and a DLED36 and the Opti was brighter, but had a much smaller beam then the DLED36. As far as DLED36 vs Tri64B, they might be about even at the same beam size do to the fact that the DLED uses Luxeons and the Tri64B doesn't. Luxeons are some of the best LEDs you can get, and are priced accordingly. They have a higher output per watt than other...
Reply
Re: design 108
Thanks for the info. I am looking to add some wash fixtures to my new stage. I have truss with 6 Elation DLED 36's uplighting an Austrian sewn backdrop, I have added 6 of the new TriBrick LED's as eye candy on the rear truss. Now I just need to get rid of my Source 4's with color changers. I am keeping to S4's to light the singers up front but would like to add 2 to 3 LED wash fixtures on each tree to wash the band (9 piece band). I've been recommended everything. I would like to be in the...
Reply
Re: design 108
That would be great if you could post the pics! I think I might go with either a TriBrick or a TriPar. I can't really go with anything less bright on my backdrop. I might keep my DLED 36's on the backdrop and just buck up and pay for the TriPars or TriBrick's for my wash. I am going to borrow a TriPar can and compare it to my TriBrick and DLED 36. I might even get a Colorado 3 since it is in the same price range.
Reply
Re: Compu Live Question
I don't have an answer for you. I am new to this type of lighting control. I can't find out how to get started with the basic programing for 15 par cans, 3 RGB and 2 Elliosodials. Help. I also receive a message about a faital error. A second install have a problem with a flickering Pro Bar. It seems to destroy the bulbs. Any recommendations? Partime
Reply
Re: DMX Operator 192 ULink
I believe it is for back up, software updates, and adding profiles, like ones that Jingles makes or ones you make yourself. I know on some other consoles, like the Show Designer line, you can use it to get a monitor out . This is done with a program and turns your computer/laptop screen into a screen for the SD. There is talk that USB displays will start popping up soon. I know High End is working on one for the Road Hog since it only has 3 USB ports on the console and no displays out. I...
Reply
Re: Operator 192 Programming
Hi Jingles, I am using the 7 channel configuration. Thanks for getting with me. Steve
Reply
Re: Dimmer Problems, Termination?
Hi Joe, Your dimmers have 3 modes 1 channel mode.. all for channels are the same address 2 channel mode.. chan 1 controlls 1 & 2, ch 2 controls 3 & 4. so the pack is only 2 channels. then 4 channel mode.. this is the channel your looking for. breaks it up to 4 channels.. should be on the silk screen of the dimmer.. if not check the user manual. Best regards,
Reply
Re: Compu Live Question
July 14, 2008 Help! I am sending this to 3 or 4 people I hope can help. I have installed a lighting system utilizing the following components: 1. – Acclaim s-fade6 at the entrance door 2. – Elation Compu -1024c 3. – an A-B switch 4. – Elation RMD620 Arc dimmer for house lights 5. – 6 Elation Pro Bar 4 – for an assortment of pars and ellipsoidals. 6. – 3 Elation RGB LED at various points in the path - They are addressed as 101, 108, 115 Problem: When the x-fade is operational it controls more...
Reply
Re: Global Edit of Values for One Light + Right Click to Fade
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply
Re: How to run an SS8 with Behringer FCB1010?
Suspx, Make sure that both the Stage Setter 8 and the MIDI foot controller are on the same MIDI channel. Keep in mind that the MIDI indicator on the Stage Setter 8 will light up even though both devices are on different MIDI channels. Once the proper MIDI channels have been assigned, the Stage Setter 8 will respond to basic note on/note off commands. Here's how to assign the MIDI channel and the table used to send the proper notes. (This is posted on the manual). MIDI Settings: To change...
Reply
Re: another noob question.....
Rick, What channel is the DP-415 address to? If using sliders 5-8 then it should be set to dip switch 1 and 3 on. Also on the Scene Setter 24 you can change the output channel for each slider. Have any of the sliders been changed to control different channels? If so, you can reset them by holding the record button and tapping flash button 7 three times, while in record mode.
Reply
Re: another noob question.....
Now I get it. To get channel 5 i need to dip switch 1 and 3 which equals 5. DUH So if I add another DP-415 I need to dip switch 1 and 4 to equal 9. It's all starting to make sense now. Thanks again for your help Sergio
Reply
Re: Help setting up lights... total noob
Ok... after reading through the forum (which is awesome) last night for a couple of hours I think I figured it out... 1. Set the first DP-415 to read channel 1 2. Set the second DP-415 to start reading at channel 5 3. Set the first group (Back wash) of Color Wash light to read channel 9 (Master/Slave mode) 4. Set the second group (Back lights) of Color Wash lights to read channel 13 (Also Master/Slave mode) Is this right? Am I even close?
Reply
Re: Operator 192 questions newbie...
I believe your issue is that each fixture on the 'Fixture' button represents 16 channels. Since you address the lights in numerical order, the 'Fixture' buttons won't line up. So fixture 1 is really channels 1-16. Fixture 2 is channels 17-32, then 3 is channels 33-48 and so on. Try setting your first group of lights to channel 1 making them Fixture 1. Then your second group of lights as channel 17 making them Fixture 2. Lastly, your last group of lights to channel 33 making them Fixture 3.
Reply
Re: vista 64 bit
isnt there a way to downgrade vista as 32bit? And if you have 4 gigs of ram swap it out for 3? Sincerely,
Reply
Re: vista 64 bit
There is no downgrade from 32bit to 64bit. Instead, Windows XP x64, Vista 64 and Server 64 all have 32bit emulators in them to make 32bit programs work on them. The issue is drivers for 64bit are completely different for 32bit. As for the RAM issue. You can use 4 gigs of RAM on a 32bit OS. The way RAM limits are determined are by your physical extensions and how much your CPU can handle. Most processors now a days are are 40bit, meaning 2^40 bits of memory or 1,099,511,627,776 bits of data.
Reply
Re: How do you select & Group of fixtures?
First off, as if you don't hear it enough, I'm new to the software and just moderately familiar with DMX and programming lights. Jingles, I have two 6 channel dimmer packs that I would like to group fixtures together. Do I just need to change where they are plugged into the dimmer pack and make it easy? Also, I have 8 LED PAR 64's and I would like to group them all together as well as other different groupings. I have 4 Intimidators and colorado 3's that I would like to groups in various...
Reply
Re: Show designer 3
You should have no problem transferring to the new console and not have to rewire and readdress your fixtures. The extra universes are in case you need them, meaning more then 512 channels of lighting, or can make your life easier at times. For example, if you have lights at one side of the room and lights on the total opposite, instead of looping them all together, run one DMX line to one side and another to the opposite side to save on cable and stop possible issues that may arise. As for...
Reply
Re: Scene Setter 24 Password Issue
Dude download the manual on page 3 it says While holding down the record button press bumpers 1,6,6,8 in sequence.
Reply
Re: Compulive works, but no output from Dongle, Please help!
hello. Welcome. Sorry your having trouble. Tell me are you going from 3 pin to 5 pin at all?
Reply
Re: Compulive works, but no output from Dongle, Please help!
You know, I looked all over the place in the new user manual and could not find a disclosure. Past user manuals had this, and It should be in the current user manual. Please read carefully the following preventive measures carefully: 1. Place a DMX insulator between interface and DMX fixtures (e.g. DMX branch 4, Opto Branch 4) in order to protect them both from any interference and from overvoltage. 2. We advise you to have an available spare RS485 driver IC. This is an 8 pin electronic IC...