Skip to main content

Tagged With "Protheus Beam"

Everything
Reply

Re: Venue Par 64

hobbyworld ·
Correct, I went to the BEAM button, set all three options to full & as I did the lamp went dark. Went back to COLOR MIX & have full control.. I do thank you so very much, & am really impressed with your work & quick responses. Thank you again champ.
Reply

Re: Info/Experiences with Opti Quad Par?

serraava ·
Hey scrogers and welcome to the forums. I have a bunch of Opti Tri's myself that I use for theatre stuff all the time. Biggest reason I like the Tri stuff is no color shadows. I get a shadow of whatever color I am mixing vs 3 different shadows with standard LED stuff. Looks a lot more realistic for theatre. Other advantages include the obvious, no more gels, 16.7 million colors (4.3 billion with the Quads), no more lamps, a lot less heat on stage, low power, etc. Brightness wise, they will...
Reply

Re: Info/Experiences with Opti Quad Par?

Jingles8302 ·
Discharge moving head washes have a Fresnel lens in it that further help wash the beam of light into well... a wash. At least that is how I understand it. As far as a single point LED RGB fixture that color mixes that is quite an expensive thing to do. I know of maybe one or two that have done so and the fixtures cost a lot of money. We will get there though. Sincerely,
Reply

Re: Platinum Spot Videos?

foxeventgroup ·
Hello Guys. I am a big Elation supporter. I own some of the Platinum Spot 5r Pro fixtures as well as the Platinum 5r Beam fixtures. I have a few videos of them in use on my Youtube page. One of my videos is actually a comparison of a Platinum Spot 5r pro vs. an Elation 575e. Other than the fact that the 5rs have small gobos and no animation wheel, they are the clear winner in other comparisons like brightness and the zoom feature just to name a few. It might help some of you make a decision...
Reply

Re: Why can't I get the profiles from the web library

lightsout ·
Ok, I have good news. The version of Compu Show that you shot me works to its full extents (as far as I can see). But I could not get one of the profiles that I have for Compu Live to convert (using the scan library save as method). I looked at the Compu Show directory but did not see a Chauvet Scorpion STORM RG (only Scorpion Storm or Scorpion RG) and cannot seem to find a profile that gives me all of the functions I should. When I tried the scan library it said The profile must have one...
Reply

Re: More Stage Designer 2CF Profiles

kurzninja ·
I could use the 6Spot profile as well, and if you have one, a Q-Beam 260 LED. Thanks! Email is kurzweilfreak at gmail .com
Reply

Re: Lamp on using the DMX Operator Pro

Jingles8302 ·
The "Spot Light" look is programmed on the controller. you just don't use a gobo or even a color. Just record position for pan and tilt and then bring the dimmer up and open the shutter and focus the beam. download this PDF and give it a read. It might help. http://www.elationlighting.com...dmx-101-handbook.pdf Sincerely,
Reply

Re: Profile Needed - Chauvet Q Beam 260

Jingles8302 ·
Here you go. http://db.tt/DXC9BWt That is the entire Chauvet updated library. The vue 6.1 was slightly updated. Let me know if you have any issues with it. The GBC is in there also and i made the Q beam 260 LED for you. Let me know if you need help getting the XML to the right folder for Emulation to see it. Also let me know if you are on Mac or Windows. Sincerely,
Reply

Re: Need Multiple Fixture Profiles!

Jingles8302 ·
OK here you go for Compu Live. Robe Robin wash 300: https://www.dropbox.com/s/o0r4...00E%20Wash_mode3.ssl Chauvet Q wash LED 260 9ch: https://www.dropbox.com/s/ebkh...0260%20LED%209ch.ssl DS1200C 24ch: https://www.dropbox.com/s/0xzq...t1200%20C%2024CH.ssl Plat Beam 5R 11ch: https://www.dropbox.com/s/xw74...205R%20BA%2011ch.ssl Sincerely,
Reply

Re: For Design Spot 250

serviceg ·
hello, im afraid there are not optional lens to convert yours to a beam per se.
Reply

Re: Profile For Chauvet Intimidators 350 Beam And Spot LED

djerikhouston ·
Chauvet Intimidator Beam LED 350 http://www.chauvetlighting.com...D_350_UM_Rev1_WO.pdf Chauvet Intimidator Spot LED 350 http://www.chauvetlighting.com...D_350_UM_Rev5_WO.pdf
Reply

Re: 5R Beam Extreme

foolstar ·
I just received 4 new Beam Extreme fixtures. They all have this same problem in extended mode. The only strobe function that works for me is the random. They are all ver 1.2. Any ideas on how to fix this problem? I have tested with the Martin M1 and Avo Titan One. Thanks!
Reply

Re: Profile For Chauvet Intimidators 350 Beam And Spot LED

scotth 2 ·
Did these profiles ever get posted? I could use the 350 beam profile for compulive Thanks
Reply

Re: Platinum spot 5r pro profile

soulmgmttech ·
hey jingles I am having an issue with this light on the program. I can t seem to get the beam to turn on . every other function works . any help? 17 channel mode
Reply

Re: Platinum 5r Beam Hotspot

Jingles8302 ·
Eddie, actually looking at your picture, you aren't trying to use these beam fixtures as a projection are you? The platinum beam 5R is an amazing aerial performer, the actual gobo output and image itself may not look good or crisp, but when in the air with fog or haze, it looks great! but if you look at the gobo on a wall and from even 40-50 feet away there will always be a hotspot from the gobo. you can try the frost filter to enable a softer looks to the beam but this will never clear up...
Reply

Re: Satura Spot LED Pro Profile

Jingles8302 ·
Hi Richard, I see, that's a tricky one as the 3D doesn't do so well with light fixtures that have more than one beam output. what channel mode are you using mostly? The reason why you have so many fixture representations in the editor is we give you a square PER lightbeam output/pixel. But if you let me know what channel mode you are running yours in, i maybe able to tweak it for you.
Reply

Re: Platinum 5r Beam Hotspot

elationpro ·
Hi Eddie, regarding the Platinum "Beam" 5r. This fixture naturally has a hotspot. It is not intended to have a flat field as it is also not intended to work as a "Spot" fixture on a stage. The intention of this light is to produce a sharp "Beam" of light at 200 feet away. Using the fixtures frost filter, you can open up the beam and get a great wash out of it. as a wash this frost filter eliminates the very tight hot spot.. but if you are using to project gobos.. the hot spot will always be...
Reply

Re: Platinum 5r Beam Hotspot

eddiie ·
Totally makes sense. I could not find the projection distance in the manual. I unfortunately do not have 40 feet (maybe I do; still not enough) of test room to try it out on. These lights come with 11 different Gobos, too (which I don't have). Just not sure why they bother if you need 41+ feet. I really wish I had one to compare it against. I'm will to make the hike up there, meet some people, too. Let's do it.
Reply

Re: Platinum 5r Beam Hotspot

eddiie ·
200 feet away, no we're talking!!! The gobos are so tiny. How in the heck..... Why gobos at all? Let's get together and compare. Thank you all.
Reply

Re: Platinum 5r Beam Hotspot

elationpro ·
Hi Eddie, again, its aerial beam effect.. think about shooting it into the sky.. you will never really see the gobo projected on any surface... yet what the gobos do is give shape to the beam of light as it shoots across the sky.
Reply

Re: I need profile files for a Chauvet Rouge2 WASH fixture

davidh ·
Thanks James. Do you also happen to have the Chauvet Rogue2 beam? Thanks
Reply

Re: Need to add light... Monoprice... 612745 to Emulation SW.

djalfa ·
Can someone please help, I need to add light. to control with Emulation: Brand of light: *MFL.* Features: Ultra bright,18pcs 15w High Brightness RGBWA 5-in-1 Led Lamps .Red, Green, Blue, White, Amber colors mixing Electronic Dimming: 0 - 100% Beam angle: 38 degrees 4-button, DMX digital display on rear panel Operational modes: Static Color Mode, Program Mode, Sound Active Mode and DMX Control, Master/Slave model. 5/9 channels Built-In Programs Static color, macro colors, strobe and strobe...
Reply

Re: Profile needed

dj-luis ·
Hey Jingles . Can you make a profile for me ? I have Chinese moving heads : Beam Spot 280W . Thanks.
Reply

Re: Profile needed

Jingles8302 ·
email me, jamesk at Elationlighting dot com and be sure to tell me it is for compu Live ssl and also include the DMX traits.
Topic

Proteus Beam Fixture Firmware

Zach.S ·
Upload tool: E Loader III Proteus Beam_V1.6.0 Only for V1.6.X units Proteus Beam_V1.5.1 Only for V1.5.X units You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed,...
Topic

Platinum 5r beam lamps off randomly

Zack Fuehring ·
Hey all, I am an audio guy with a basic background in lighting. I have a Platinum 5r beam that will randomly lamp off and lamp back on after sufficient cool down time. I changed the lamp and left it on for awhile and it lamped off again after 10-15 minutes. I am assuming there could be a few things that cause this but I am stuck on how I should troubleshoot next. Thanks in advance!
Topic

New profile for SD3

truwrshp ·
How do I get a fixture profile for a new one I have. I have attached the user manual. I want to use the 16 channel set up.
Topic

Blizzard HOTBOX exa Profiles

John Leonard ·
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic

Platinum 5r Frost

LukusPrime1 ·
Sorry to be a pain but its that time of year when all our kit is being tested and serviced, one of our fixtures is having a frost problem, the frost will not fully close, it leaves a 45 degree angle on the beam. Is it just a case of re-positioning the frost on their mountings. Cheers.
Topic

Spot Briteq BT-Theatre 60FC Black LED theaterspot

Technican ·
Spot Briteq BT-Theatre 60FC Black LED theaterspot I have got an demo. The spot Briteq BT-Theatre 60FC Black LED theaterspot is very good. We want to buy 10 of them but without fixture we can’t use them with Emulation. Can you do the job? If we have the fixture, how can we update Emulation with teh fixture, Best regards, Deschamps Koen.
Topic

R2x beam and spot profile needed

Scott H ·
i need a profile for both rouge r2x beam and spot for compu live please!
Topic

M-PC profile for ADJ VIZI BEAM 5RX

Leonard- ·
I need a profile for "ADJ VIZI BEAM 5RX" for M-PC. My version of M-PC has a profile for "ADJ VIZI BEAM 5R" but it does not work with "ADJ VIZI BEAM 5RX". M-PC Build 3.42.570.0 Please let me know where i can download it if it is already available. If not please let me know what i need to do to get it created. Thanks in advance.
Topic

Add fos 5000rgb diode lasers and the FOS Beam 150W Led on Emulation Software

Mark.t ·
hello i need some help. I'm using Emulation Software for PC 1.03.97 and want to add the fos 5000rgb diode lasers and the FOS Beam 150W Led. my problem is that they are not on the list of other manufacturers, what should i do to work? thank you very much.
Topic

New Platinum Beam 5R Not Working

Moongoose243 ·
So I received new fixtures this last week. 6 Platinum Beam 5R Extreme. I placed all six at the front of our stage. DMX and power works. We tested them and all of them worked fine. I've had them for only three days and one of the fixtures will not produce a beam. I have checked everything and reset stuff on the fixture and on the lighting console. It is still getting all the commands to Pan and Tilt. The Beam is just off completely. I did check the temperature on the fixture is stuck between...
Topic

Any Programming sources for Elation Beam?

FCBC ·
I’m new to programming and trying to program Vibrio on an IPad to control my (2) proteus beams. All they do is wiggle back and forth over and over. Are there any sources to help with programming? Ive used the manual to map the DMX addresses starting with 1.
Topic

scan profile for INTIMIDATOR BEAM LED 350

viccmedia ·
Does anyone have the .ssl file for Chauvet Intimidator Beam Led 350. I am using Elation Compu Live and Easy Stand Alone. Thanks.
Topic

Dec. 6th 2013 official Release!

Jingles8302 ·
http://www.elationlighting.com...es/Compushow.exe.zip Download the latest Dec 6th 2013 release of compu show! Below is a list of new features. ********NEW FEATURES******** _______________________________________________________________________________ copy group from master to other pages ------------------------------------ Add new icon to open and close beam in fixtures window with the selected fixtures ------------------------------------ Del Key now works in the cycle editor...
Topic

Futurelight PLB-130 Fixture

nikolaus ·
Hi, could you create me a profile for the Futurelight PLB-130 Beam please? Very Thanks Niklas The manual: http://media.steinigke.de/documents/00080928.pdf
Topic

Profile needed for the "Elation Platinum Beam 5R Extreme" for SD3

gamerlink1 ·
Hello everybody, I'm needing the fixture profile for the "Elation Platinum Beam 5R Extreme" for the SD3 Cody@gadgetsuite.com Thanks in advance, Cody
Topic

Emulation entry programming

nathanmdh ·
Hi everyone. I am new to DMX programming. I have watched a lot of youtube tutorials and done quite a bit of research, but things aren't meshing very well with my set up. Right now I just have 2 Chauvet Qspot 560 Led lights hooked up wirelessly with a Blizzard lightcaster and 2 blizzard Wicicles. Using Elation emulation cue cable I can gain control over the lights. However when I make a patch and record it into the program. Nothing plays back. the head of the light moves around like i...
Topic

platinium beam extreme

djkaoz ·
hello, I have 3 extreme fixtures and all 3 have had the same problem with the frost option... once I set it... it cant be removed unless I shut down the DMX program. I olso have visi beams that work just fine... all channels..
Topic

Platinum 5r Beam Hotspot

eddiie ·
Hello, I have a Platinum 5r Beam, it has one heck of a hotspot making the light unusable, except for dark colors. Is there a hotspot adjustment like there is for HTI150 bulbs? There's 4 screws that hold the bulb in place but I don't they they are meant to be adjustment screws. OR is it the bulb? Attached is a picture.
Topic

Preset patterns

nrpinc ·
When I have a preset pattern with a gobo and color and I switch to a different preset pattern the color goes to white and the gobo goes to the solid beam. This is with every fixture I have in my system. How do I keep the same color and gobo but be able to switch between patterns without having to create new switches or buttons for every pattern?
Topic

Level Q7 Profile

richard89 ·
I am attempting to use the Level Q7 fixture in EasyView 3D and have some questions about the profile. First, the fixture itself shows up as a flat bar and not as a par can or some other shape. Second, even with the "Show the Light Beam" checked for everything on the master page as well as the fixtures page, there is still no light beam shown on the walls or floors it is pointed towards. I have downloaded the profile from the site again and replaced the existing just in case the original...
Topic

Platnium beam 5r

planetmusicdj ·
I have a problem with my tilt. Light was working good then stop I reset it and it said tilt error sensor? Any ideas how to fix this
Topic

For Design Spot 250

scenedevis ·
Hello, I bought two of Design Spot 250 first generation, and I like this product very well, even if I cannot buy this old product because Is out of order.. :S But my question is.. With the new moving with beam, is it possible to change the lens of the DS 250 by a beam lens?.. I know the DS250 have an iris inside and can do the similar beam effect, but I aske just in case.. Thanks you very much..
Topic

Moving Head X-Y Mapping

pitman ·
Is there a resource that explains the virtual X-Y mapping of a Mover relative to the x-y grid in compushow? For instance on scanners its pretty easy to determine location of fixture beam based on the x-y coordinates in CS....On movers upper right quadrant of x-y grid is not upper right quadrant for the beam. I have struggled with this since I got my elation movers....i have just managed until now....I would like to know how I can run the programmed movemnts so that the mover is limited to...
Topic

CompuShow and Spot Pro issues

kenpetersen ·
I am just going to copy in here the discussion I've had on a Facebook group of CompuShow users... CompuShow issues abound! 1) Compushow repeatedly "forgets" the MidiCon button assignments (all of them). Mid-run, or on an app restart. 2) Comupshow is continually 'repatching' fixture placments in the 3-D workspace. I lose instantly over 20+ mins of fixture arrangements in one dialogue box. What am I doing wrong? I'd think if I saved as I go, it'd stay as I wanted. Common issues? Common fixes?
Topic

Profile For Chauvet Intimidators 350 Beam And Spot LED

djerikhouston ·
Hello, I Was Wodering If Anyone Can Help Me On Getting The Profiles For The Chauvet Intimidator Beam 350 LED And Chauvet Intimidator Spot 350 LED Please And Thanks (:
Topic

5R Beam Extreme

tonyvision ·
Howdy, I think there may be a firmware problem with the new 5R Beam Extreme. The shutter channel does not react correctly in extended mode. It works fine in basic and standard mode. I have tried this on MA2 (user created profile), Avo (Avo created personality), and direct raw dmx. I find the same issue every time. I will test with Hog3 and Chamsys tomorrow. Am I the only one to find this? Tony
×
×
×
×