Tagged With "Fuze Pendant Firmware V1.09"
Topic
Fuze Profile CW Firmware
Upload tool: C-Loader or USB Stick Fuze Profile CW Firmware V1.0.10 What's new: Improved cooling. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Reply
Re: Fuze Par Z60IP Firmware V1.07
Hi I have one trouble about FuzePar Z60IP Firmware Update. I updated my FuzePar Z60IP Firmware, original V.1.03 to latest V1.07. I did it with C-Loader2, and got it successful, and It showed V.1.07 on fixtures display. but I operate with my console, each time move colors(RGBW) encorders up and down, FusePar flash, I can't get exact level and smooth fade. without console, I tried by manual mode, it also happened same flash. I wonder what I should do next. Could you advice me how to deal with...
Reply
Re: Fuze Par Z60IP Firmware V1.07
Greetings would you be able to send us a video?? if so please send to support at elation lighting dot com
Reply
Re: Fuze Par Z60IP Firmware V1.07
I tried V1.06 on your web already, but it didn't improve. If you have older version of firmware, V1.05,V1.04,V1.03, send me somehow. V1.03 is original I'll try them one after another.
Topic
Fuze Profile Fixture Firmware
Upload tool: C-Loader or USB Stick Fuze Profile Firmware V1.0.15 What's new: Noncritical update due to IC change and global supply issues. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not...
Reply
Re: Fuze Profile Fixture Firmware
Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded. Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.
Reply
Re: Fuze Profile Fixture Firmware
make sure you are using a 2.0 usb. also where there any issues prior to the upload? any errors
Reply
Re: Fuze Profile Fixture Firmware
I'm using a USB Stick plugged into the lamp. No Hub. One of the lamps had the same error before the update. Now another one has that empty Module 6 to and the Zoom and Focus doesn't work either. The two other lamps are working well as before, after the update.
Reply
Re: Fuze Profile Fixture Firmware
shoot me an email with your info.. gines dot gines at elation lighting dot com
Topic
Power connection for Fuze Pendent Light
Hello, I am looking to install Fuze Pendent lights for one of the projects. I need to know how is power connections can be done for multiple lights mounted in ceiling? Can I do loop in loop out connections or each Pendent needs to be connected with individual power connections? Can you please help with proper connectivity between multiple lights. Thanks & Regards, Manav
Reply
Re: Power connection for Fuze Pendent Light
greetings, you only have power in option, please visit our website for further details. https://www.elationlighting.com/fuze-pendant
Reply
Re: Power connection for Fuze Pendent Light
As per the below there are 2 power supply Internal and External? Can you please advice how does that work? How the connectivity gets connected to make sure all the PD lights are connected and we get them working? My question is that do we need External Power or we can use Internal Power? If we can use Internal Power how will it work and what will be connectivity? Thanks!!!
Reply
Re: Power connection for Fuze Pendent Light
where are you located? also on page 10 the general power connections are outlined. this should be sufficent information for the electrician. between this information and current load, the electrician should be able to calculate how many outlets etc would be needed based on your particular needs/ also local building codes as well.
Reply
Re: Power connection for Fuze Pendent Light
go ahead and email me at gines dot gines at elation lighting dot com
Reply
Re: Power connection for Fuze Pendent Light
Great!!! Thanks for the help I shall send you email soon.
Reply
Re: Power connection for Fuze Pendent Light
Can you please share connectivity diagram if possible? This would really help? How can we connect multiple PD Lights? If you can share some insight it would be really helpful.
Reply
Re: Power connection for Fuze Pendent Light
Greetings.. there is no connectivity diagram per se since they only have one power in. your electrical contractor would have to design a grid. the specs are listed on the web page, your electrical contractor will need this information for load calculations.
Reply
Re: Power connection for Fuze Pendent Light
are you going to hard wire or use the power cable?
Reply
Re: Power connection for Fuze Pendent Light
Well can you please provide both methods as we would need to work with electrical contractor. As of now I don't have any information. I am new to this and would need your help to guidance as of in typical scenario how can we do the connection? Once you share this info I can get back to my electrical contractor and provide him our options and ask him to choose how they want to go with same. Thanks!!!
Reply
Re: Power connection for Fuze Pendent Light
We are Located in Canada - Toronto!!! If you have any direct contact number or email to reach I can share my details or you can share with me some local contact who can help us with our questions? Your help would be really appreciated !!! Thanks & Regards, Manav
Topic
Colour Pendant Fixture Firmware
Firmware Tool Required: C-Loader Colour Pendant Firmware V1.15 What's new: V1.15 25KHZ REFRESH RATE ADDED V1.14 UPDATED CPU V1.13 MASTER/SLAVE CHANGED TO PRIMARY/SECONDARY & HUE COLOR ORDER BUG SOLVED V1.10 DMX FLICKER ISSUE RESOLVED You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section...
Topic
Fuze Wash FR Fixture Firmware
Firmware Tool Required: C-Loader II or USB Fuze Wash FR Firmware V1.0.9 What's new: V1.0.9; DISPLAY BUG FIXED V1.0.8 INTERNAL OPTIMIZIATION V1.0.7 INTERNAL OPTIMIZATION You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your...
Topic
Fuze z350 home position pan 90deg off
We have six (6) of these fixtures installed since 2017, and have recently sent all 6 back to Elation for repair (had two started dying within weeks of each other, so just sent all 6 in to have the identical replacement process done preemptively). three (3) of the six came back from Elation with their "home" position 90 degrees off (the yoke perpendicular to the menu screen), while the others remain as they were (home is yoke parallel with the menu screen). Console/control is JandsVista V3 A...
Topic
Fuze Profile/Spot/Max Series Feature Request
Hi, All! Don't know if this is a forum post or an email, but I would like the ability to turn all of the fans on at full from the menu without having to get the fixture hot enough to turn them on. Right now it seems that the fan settings are referenced when the fixture determines that it is hot enough to have the fans turn on, but if I have the fans set to MAX, I want them to be spinning at max speed at all times and not just when the fixture thinks that it is hot. Otherwise, could we get a...
Reply
Re: Fuze Profile/Spot/Max Series Feature Request
Greetings, you are correct the fans are regulated, this is meant to minimize fan noise. also yes it is possible for an affected PCB to produce a "phantom" error as a result however you should be able to confirm Fan RPM via the menu and confirm fans are operational.
Topic
First fixture in DMX chain keeps getting fried
We have been experiencing this problem ever since moving into this venue. If anyone has any insight we would greatly appreciate it. We have had an electrician come look and install a UPS in case this was a power surge issue but it is still happening. Our house lights are the color pendant series. We have a second, smaller room for other events that has newly installed sixpar 100's as the house lights. In the main room (with ther color pendants) the first fixture in the DMX chain continually...
Reply
Re: Power connection for Fuze Pendent Light
@Cesarsalad the fuze pendant includes a power locking cable. it also has a bare wire block as well.
Topic
Profile for Showtec Shark One scan
Hi i need a profile for a Showtec Shark scan for the emulation software (old) I added the manual Thanks in advance Peter
Topic
Fuze Spot Firmware
Firmware Tool Required: C-Loader II or USB Fuze Spot Firmware V1.0.16 What's new: Color Macro bug Sync SOLVED. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed,...
Topic
Fuze SFX Fixture Firmware
Firmware Tool Required: C-Loader II and/or USB Fuze SFX Firmware V1.0.14 What's new: CMY Speed optimization. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed,...
Reply
Re: eNode 8 PRO Firmware (VERSION 1 ONLY)
you have to determine via the menu/ software version, physically they are identical. if you have to replace the main pcb on an older unit (V1) the board will now be a V2. basically the update was needed due to end of life components.
Topic
FUZE MAX Profile
Uploader Tool needed: C-Loader Or USB FUZE MAX Profile What's new: - touch screen lock up bug solve - internal optimizations - prism reset optimized - RDM improved You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs...
Topic
Fuze Pendant
Firmware Tool Required: C-Loader II Fuze Pendant Firmware V1.11 (Applies to Fuze Pendant/ Fuze Pendant White/ Fuze Pendant (HW) What's new: RDM Improved You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures.
Topic
fuze wash Z120 home position
We have six (6) of these fixtures installed and have recently had to replace one. The "home" position 90 degrees off (the yoke perpendicular to the menu screen). On the old units that were already installed (home is yoke parallel the with the menu screen). I am running Grand MA interface. I know it has to be something on the light as I switch DMX address with the light next to it and it worked as expected. So I am at a loss. Any help would be awesome. I called Elation and the service person...
Topic
Problem during motor reset
When starting up my elation fuze wash z120 fixture it gets stuck in a pan, has a lot of noise and is not controllable. It does this most times (not all the time) and it doesn't matter if it is connected to dmx or not. I took it to service but they could not help. What to do? Does anyone hva experience with this problem. My fixture has had it since it was new...
Topic
Fuze Max Spot Firmware
Uploader Tool needed: C-Loader Or USB Fuze Max Spot V1.07 What's new: V1.0.4 LED PROTECTION OPTIMIZED V1.0.5 INTERNAL OPTIMIZATION V1.0.6 ZOOM BUG RESOLVED V1.0.7 PRISM INSERTING BUG SOLVED / UNRESPONSIVE TOUCH SCREEN BUG SOLVED RDM OPTIMIZED You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader...
Topic
FUZE Wash 500 Fixture Firmware
Uploader Tool needed: C-Loader Or USB FUZE Wash 500 V1.3.6 What's new: Barndoor Optimization. You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact ...
Topic
Fuze Z350 Wash Conundrum
We have several Fuze z350 wash fixtures at the venue I work at. When they are controlled by the house Avo Titan Mobile, they work flawlessly. However, when a touring act rolls through with a GrandMA console, and they strobe the fixtures vigorously, the intensity may randomly decide to stop working. In rare instances, the fixture will get stuck on, and in place. Only a hard reset from the breakers fixes this problem. Tours have told me they have encountered this problem with these fixtures...
Reply
Re: Fuze Z350 Wash Conundrum
While I'm locating the C-loader, can you give me some clue as to why this glitch only effected MAs talking to these fixtures? This is something that has been hurting my head as an Avo guy. Thanks in advance! - Bird
Reply
Re: Fuze Z350 Wash Conundrum
Personally speaking i've had this happen on my Fuze Z120s running an Obsidian NX2 console before as well, its mostly a bug in the strobe controller and I can confirm the firmware upgrade fixes it. It's not just Ma and AVO its a fixture firmware issue.
Reply
Re: Fuze Z350 Wash Conundrum
Thanks for that information ! I never managed to trigger it with my Avo, and I definitely use the strobe function for metal show. I'm just glad to hear this will fix the problem with certainty. You are my hero.
Reply
Re: Fuze Z350 Wash Conundrum
Hi, it sounds like a firmware upgrade is needed for the fixtures, email Firmware@elationlighting.com and tell them the current firmware version of the Z350s you have now and they can advise on a newer firmware that should fix this issue.
Reply
Re: FUZE MAX Profile
Greetings, can you tell me what software version you are on? this info is available via the display in Information.