Skip to main content

Tagged With "Firmware V1.0.10"

Reply

Re: scene setter 24 dmx channel addressing

Carl N ·
Luis, I have tried that numerous times. Granted , it has been about 10 years since I have used DMX lighting. My last controller, An Election was a breeze to address. This is my second Scene Setter 24 in four weeks. The first one my salesperson and I assumed was defective. Now, for many years I have used XLR mic cables and I am learning that they may not work with todays new lighting components. I am assuming there is quit a difference between XLR and DMX cabling... So, I presently have...
Reply

Re: E-Builder

Jingles8302 ·
Hi! No worries! I actually kept a Dropbox folder of ALL Emulation and E-builder releases i got and that we saved, here is the E-builder folder I have: https://www.dropbox.com/sh/8tg...hO3bOKXx61va_2a?dl=0
Reply

Re: Compu Pro 06?

ebaclights ·
I am not using any lights yet, just the viewer. I am only working with conventional fixtures on the program right now, so there is no home position. The lights fade out fine when I make a "fade out" button, but changing between scenes is what I cant get to work. Basically Say if I fade up fixtures 1-5 on my first scene, but on my second I want fixtures 6-10 to fade in, but 1-5 to fade out.
Reply

Re: spot and wash 250

elationpro ·
Hi Gustavo, The power spots all have a channel that does movement. So if you have 1 fader with a lever of 10%, that fixture may move on its own. On the DMX operator, you need to be in program mode, then reset all the faders. I am only guessing that's what it is. If not try addressing them all to A001, to see if it stops.
Reply

Re: need to know???

Jingles8302 ·
hey guys im doin it now but i find cause i have three reds in this fixture i think i does not sem to want to let me use 3 of em just two! also am i to click on the channels and enter in the numbers and signs for the channels patched to several diffeent outputs?? so for example that says 1= 0+1/40/60 and i enter in that in the box?? am i doin this right??? help me!! peace! jingles out!
Reply

Re: pics of my designs on compuware.

Jingles8302 ·
hey flash i was just messing around with like 16 of those demo moving heads. you know the one that load up when you first install the software. i just love those. and i got another 16 performance scans spread out across the stage as well as over 10 (forgot how many lol) par 64's flash let's see some of your renderings my brother!! LOL. i am curious to see others work on compu. peace! jingles!
Reply

Re: Compu Live Questions

matchless1 ·
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply

Re: Compu Live Questions

elationpro ·
Brian, I am really impressed on how you picked everything up. So to move forward, you can achieve the tempo your looking for by activating the Audio function in Compu Live. Step 1. In the "controller" drop down menu look for "Starting parameters". Then in the Options box, choose "Audio/Midi" and in this new window, click on the check box with the speaker icon. Then close all windows. You will be prompted to restart, and the Audio Analizer box will open automaticly. Minimize this for a...
Reply

Re: Easy Stand Alone SW

tylerherron ·
i think that is correct but ill make sure and get back to you on that. ill reply in 10 mins. jthtiger
Reply

Re: Help with buying the best controller

is-real ·
sorry to keep bugging, but i'm new on all of these... can i run multiple scenes at the same time, say, fixtures 1-4 doing something, while 5-10 something else? plus the 8 cans?
Reply

Re: Help with buying the best controller

Jingles8302 ·
on the operator u can run your scene and take over a fixture on the fly. and manually run your pars i believe. but about your earlier question about having fx1-4 do something while 5-10 do something else that u can achhieve but would have to program all within the same scene. understand? let me know if u have any more question. peace! jingles.
Reply

Re: Need .SSL file American DJ Revo III

elationpro ·
This is an easy one guys. create a profile in the 4 ch mode. ch. 1 = mode.. do you want to be in pattern mode or chase mode. You can select this using ch1. Ch. 2 = the pattern or chase your secting. Ch. 3 = speed of either the pattern or chase. you need to select this after you select a pattern or chase. ch. 4 = dimmer.. if you don't have the dimmer on full then you wont see any pattern or chase. The 10 Ch mode is confusing.. I put a call into the ADJ pros and waiting to here back. Best regards,
Reply

Re: Show Designer 3 manual question

davie ·
I have the printed manual that came with it, every page of it has at LEAST 10-15 missing characters, it's very frustrating. Mostly 'r' 'p' 'w' 'y' and 'n' I figured out my problem, settings were carrying over into other presets, but I figured it out
Reply

Re: Need .SSL file American DJ Revo III

stevelynch ·
it doesn't work at all... the only button that works is sound active... I don't need the 10 channel, apparently that's just for independant control of each cluster... so forget that... 4 channel is the best way to run it anyway... that being said, if I make a generic 4 channel fixture file in freestyler dmx, I can console it into doing what I want, but that's not the software I want to use... Can't you guys walk next door, grab a revoIII and work out a file on a working unit? I'm not an...
Reply

Re: Stage Pak 1 how to set up?

tylerherron ·
Oh man I can't tell you how much I laughed at that! Ok anyways, DMX, it really is a cool thing. Here are some basics. DMX stands for D igital M ultiple X . It is a way for each and every (DMX Compatible ) light, made by any manufacturer, to interact with an universal DMX controller. In a standard DMX protocol (called 512-DMX protocol) there are a total of 512 "channels" In order to get your lights to interact with the controller, you must address them. There are 2 ways (that I know of) that...
Reply

Re: Wireless DMX problem

tylerherron ·
Ok, I'm assuming you are using the Elation W-DMX products (since your posting in the Elation forums!) The manual is kinda confusing but I think I may have worked it out. Here is the excerpt from the manual that I read and this is where I came up with this fix. Tell me if you have already tried it: So what this tells me (very vaguely) is that to fix it, you may need to do something to your transmitter. Since your receiver is showing solid red, that should mean it is "free" According to the...
Reply

Re: Compu live Dec. 21, 2007 version; movie record error

perfectmixsoundinc ·
Thx for the info. I have the compu club blue unit so I guess I am out of luck on this feature, WILL THE DEC 2007 VERSION FUNCTION ON MY COMPU CLUB BLUE I/0? the Oct 2006 version worked fine with it. also it seems like a bad decision to restrick recording unless your dongle is connected when you allow us to create without the dongle thus I don't bring it home which is where I do my configs, again I create files at home for client/venue and the interface stays at the venue.
Reply

Re: Riva 80

rain ·
Also planning on a suggestion of moving the projector up flush with the drop ceiling and brining it towards the screen about 10'. Its currently an older model projector and its 24' from the screen.
Reply

Re: black lights

serraava ·
I apologize in advance for the very long and off topic post I am about to post. SCR dimmers work by chopping the sine wave of AC. This is how they 'dim'. AC is a wave. DC is a line. Now when power is created, is is created by a magnet spinning in a coil at 60 times per second, thus 60hz AC. This is how and why the wave is created. The little sine wave above, the start as 0 degrees, the first peak point as 90 degrees, the next mid point as 180 degrees, and the bottom peak point is 270 degrees...
Reply

Re: Need .SSL file American DJ Revo III

Jingles8302 ·
ok but all i have is the 4 channel mode. i haven't tackled 10 ch. yet cause the traits for it are TOO confusing to me. waiting on elaboration from ADJ! chck your mail soon!
Reply

Re: black lights

serraava ·
Continuing on now: The buzzing noise is known as lamp sing, it's caused by the power being turned on and off really fast. The way this is fixed is more expensive dimmers have what is known as a choke after the SCR so the power change is as dramatic as on/off. The better the quality of dimmer, the less lamp sing you will get. Now why non-dim isn't really non-dim. Despite you setting a dimmer to non dim, either via the pack or the console, the power still passes through the SCR and choke. So,...
Reply

Re: Demo Download?

ebaclights ·
Hey Jingles, Nice stage! I am wondering if you can design me a stage, that I can import into compu? I would have you build me one with lights and all, but I am looking at doing several different things with the stage, so I will add my own. I don't care about adding all the details, if you could just do the shape and layout it would be great! The stage is 45' wide, 16' deep, the ceiling peaks at 18' and goes down to 10' on the side walls. The only rounded shape is the front lip of the stage,...
Reply

Re: Design 36 LED

rain ·
Yea, going in two diff. churches. (order will be for Magnolia Music Center - Gulfport, MS) We are new so I'm sure we have to pay for it all up front a few times before we get "terms". HAHA! 8 DLED 36, 2 DLED MH, and 2 Design Spot 250 fixtures go to one church. 10 DLED 36, and 2 Design Spot 250 fixtures go to another church. Both will go Compu Live for control. (and yes, James has laid out one 3D for me and might be working on the 2nd one soon) Plan on having both installed and trained by...
Reply

Re: Design 36 LED

rain ·
Hey John Seems this being our first order, Elation wants a Money Order. So Tony plans on hitting the bank on Monday and getting that mailed off. Alas, these lights need to be installed the week of the 24th. (10 DLED36, 2 Dspot250) Not a large order - sure you have those in stock and ready to ship. Thanks Rain
Reply

Re: Design 36 LED

rain ·
Thanks man! We overnighted the money order and will just keep our fingers crossed that these lights will arrive while the lifts are in the church. I'll also be placing an order for another pair of Design250 and 10 more DLED 36 fixtures within a day or two.(FYI) And next week we will be ordering some AMdj LED pars and a DMX controller (the one that looks like a typewriter with scroll wheels on it). Thanks again for your help Rain
Reply

Re: basic console programing

serraava ·
Out of order isn't as much a problem on cue lists as one may think. As long as you label stuff and are fast, the 'Go to' button is your best friend. I did a dance concert last year with about 500 cues, and it went in a different order each night. So I named each scene and programed in blocks. Like scene one was cues 10 thru 19 with 19 being the blackout, allowing me to record pre-load cues from 19.1-19.9. Worked well. It also gave each number a block of cues that lined up numerically cue...
Reply

Re: SS8 Question

bigbadblule ·
I can not afford to swap this out ... I do this stuff for free. I guess I got bad advise when I bought it. I am going to try to program new chase scenes without channels 9 and 10 and see if that works. Thanks for the help. What should I have bought for a small DJ rig?
Reply

Re: Scene Setter 48 issues, less than 1 year

tylerherron ·
Oh No, We have had this controller for over 10 years (i think. . .at least 7). The problem is that when you push some of the faders up to 100% it skips down to 30% and flashes around. It is kinda hard to explain. You push it up and it hits 100 then jumps back and forth between 30 and 100. Does that make sense? We just need another one. About the 192 not being satisfactory, you would have fast control over lots of faders. All you would do is it one button, and then change the faders. There...
Reply

Re: Riva 80

rain ·
I wanna see em! Have a small church (stage may be 10' across and drop ceiling is 9' high) that I think a Riva system would be PERFECT for. About to send them pricing info this week. Thanks Rain
Reply

Re: Newbe Question

djopt ·
Great! Thanks. You shouldn't of offered for me to call, you may have to block me!!! Lol I am not new to Intelligent lighting, but new to DMX. I have always owned Trackspots and other High End Systems fixtures that had dedicated controllers. So I am starting forom scratch here. I would like to get a good basic show down before Prom season for me starts which is the 2nd Saturday in April. it doesn't have to be extremely detailed, just about 7-10 different looks. I look forward to talking with...
Reply

Re: General uplighting for sanctuary - suggestions?

rain ·
Its the emmanuel baptist install. at cathedral peak the ceiling is 27'. would guess on the sides it was 10-12'. (the church with the vaulted ceiling - remember?) Wonder how much spread a PLED36 would give at that distance.... more of a wash than a pin spot perhaps.. trying not to break the bank here
Reply

Re: General uplighting for sanctuary - suggestions?

Jingles8302 ·
are you looking for a wash type light? and i understand your throwing them 10-12 feet? if u want im on my usual instant messenger servies. hit me up lol.
Reply

Re: What are some other uses for moving heads at weddings?

serraava ·
I don't know if I really should since I technically wire it so it can run 10 amps over spec, even though it would be impossible for me to pull a prefect 60 amps on each leg, let alone 50 amps per leg. But with those specs, I am sure you can find out what it is, lol.
Reply

Re: Newbie looking for help/advice

serraava ·
Yes, you have 96 pages that you can add to 8 different books in different ways for each book. The console doesn't say how many pages per book, so I assume you can use as many as you want. Don't quote me on it though. Sometimes you will see something like number of steps per show or chase. So if it says 40 Steps per Show, that would mean each of your books can have 40 pages in it, but you can make up 96 different pages to use in the case of the DMX Operator Pro. Don't think of CompuLive so...
Reply

Re: Newbe Question

chrisbozarth ·
Is there an easy way to make a Blackout seen to make all fixtures in the universe go to 0?
Reply

Re: lighting intensity and throw distance

serraava ·
Well, that all depends on beam size and throw distance. How bright something is over distance is can be determined by lumen's. How bright something is over a given area is foot candles or lux. Foot candles are lumen's/ft^2, so it is a more actuate method of how bright something will be over just lumen output which is based off of a single point instead of actually beam size. FC is considered old, but one FC equals 10.764 lux, though some just use a factor of 10 to simplify things. Warning,...
Reply

Re: DMX Programmer Question

djargyx ·
I think I've got it figured out now. I believe that Fade drops all active channels to 0 (EDIT: for black that is; Fade transitions to the next channel values otherwise). Unfortunately I just picked up some Chauvet Colorstrips and their RGB mixing requires channel 1 to be at 210-219 and then mixes RGB values on channels 2-4. EDIT: So, from black it has to fade through programs on channel 1 (I haven't tested, but I believe having black w/ channel 1 @ 210 might be ok for in between steps, still...
Reply

Re: Fading to black

jaym ·
Thanks Chris, The only DMX channel I was adjusted was the DIMMER channel (channel 7 according to Magic-260). All other channels remained the same. The piece that eludes me is how do I get a slow fade between the scenes from full illumination to a black out and unfortuately the fade time did not appear to work. I did some experimenting and the only time I got the fade time to work is when I was repositioning lights from point A to point B. In this scenario I could use the fade to say do it in...
Reply

Re: design 108

serraava ·
I think your best bet would probably to go with DLED36s since they come stock with the 39 degree beam angle. You can also get roughly 2 for the price of one DLED108. Have you looked at the Opti RGB with lens kit? This might be an option since it is cheaper then the DLED36s, with the lens kit. Here is another idea, look at the Opti 30 RGB. You should be able to get between 10-15 at that price range. You can use those 10-15 Opti 30s to replace the DLED36s for your back drop wash and move the...
Reply

Re: Fading to black

ronr ·
I just tested a Magic-260 with a Design Spot-250 and was able to program a fade out. To program a fade out, set your dimmer to zero (0), add your desired fade time and save it to a desired page/button location.
Reply

Re: Fading to black

jaym ·
I was back it again this evening and tried several of the recommendations with no luck. ronr -- those where the exact steps I took. Even with my dimmer set to 0 and a fade time to 30 sec, it snaps to a black out. No slow fades. John -- could not find any snap or cross fade feature on the Magic 260 and nothing is mentioned in the documentation. Since we open the show this Friday. I have trained the operator to use the master fader. I'll keep looking for an automated solutions. Let me know if...
Reply

Re: design 108

serraava ·
Yes it does. I am still wondering if they are going to make different plates for them like Coemar has for their ParLite LED series, which is the direct comparison to Elation's DLED36. I have actually found that musicians love the LEDs over conventionals do to the lack of heat. They also love that I can get 'high' powered lights into a space with little to no power and not have to worry about tripping breakers. The nice part when someone thinks something is too bright, dim it. And then when...
Reply

Re: Pan Limit on DS250

matchless1 ·
Man, I hate it when I spend the time to type out a long post, then turn around and figure out the answer to my own question!! Anyway, instead of deleting the question, I figured I would post the answer in case anyone else had the same problem: It seems that my INIT scene in my Design Spot 250 PAGE had all the pan channels set to 85...go figure! So, of course I just set them to 0, saved, and now I'm rockin' and rollin' again. I guess sometimes you just have to ask the question to trigger the...
Reply

Re: Compu Live Question

ebaclights ·
No you can't use faders with the Compu Box. It simply senses the momentary closing of the switch to change the presets, it will not allow you to manually fade. You can get the low voltage buttons at Radio Shack, and MAYBE they can order the 10 pin IDC connector.
Reply

Re: Global Edit of Values for One Light + Right Click to Fade

ebaclights ·
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply

Re: lighting que fades

Jingles8302 ·
Are you/ have you tried using the scene fade toolbar? if you simply right click on the blue title bar on the fixture page (the bar that has the text of the fixture for example on the bar it will say Design Spot 250 or w.e. you may have) right click on that bar and you will see a few options come up. select "Scene Fade Toolbar" and it will appear at the top on the fixture page. all you do is click on your scene. check the check box to the left side of the new area. and add a time to only the...
Reply

Re: Scene Fade Suddenly Not Working

matchless1 ·
John, My Page Settings were correct...Fade option was checked on every scene. I eventually determined that the problem had to do with my fixture patches, and now I have a new (bigger problem): I am totally baffled by how patches work in CompuLive. It seems that every time I open a different show, then try to open the 3D viewer for that show, it says the patch has changed, then it asks me if I want to update automatically. If I say yes, it totally jacks up the positioning of my fixtures. If I...
Reply

Re: Haze question.

serraava ·
How long haze sticks around depends on a few factors. First, oil based or water based. Oil based tends to linger longer then water does. Second, what is the air flow like in the room in question? If you are moving a lot of air, haze won't linger as long. Poor air flow and haze will stay forever. So if the room has poor air flow, some fans drawing air in and out (like a wind tunnel) would help quite a bit. As for a good, small hazer, I would recommend water based due to the need to clear the...
Reply

Re: Scene Fade Suddenly Not Working

matchless1 ·
John, 1. Ok, I checked the Page Settings like you said and all of the "channels" do have the FADE function enabled. They're grayed out, but they ARE checked. I'm using DLED36's (8), AMDJ P64LEDPros (8), and DS250's (4). 2. You say, "If you have more than one page, then you will have conflicting issues". I do have more than one page...one page for each type of fixture. Is this a problem? If so, how can I possibly add fixtures without adding pages? 3. I'm fine with saving it in the default...
Reply

Re: newbie question

bige ·
I really need some help from someone Maybe one of you knows someone who would be willing to help me by drawing out a wiring diagrams of the dmx cale and how to set channels in the show designer 3. We have to mount 10 more lights this weekend and have 3 saturdays left till our first Sunday service and I need help This is what I have Show designer 3 12 -Elation Cyber Pak 4 channel dimmer 32- American par cans 16- Altman Ellipsoidals 6 -chauvet Colorado 3’s led cyc light 8 -chauvet L.E.D. par...
 
×
×
×
×