Tagged With "Paladin Panel Firmware V1.06"
Reply
Re: Show Designer 2
Ok, then I have got to do some wire tracing and see where the dimmer is for the house lights. It is not anywhere that I would have expected to see it, so that probably means it is hidden behind some wall or panel somewhere.
Reply
Re: Show Designer 2
You can try taking your sd2 over to that jack panel, plug in, and try out every dmx channel till you find what works. It might just be the first couple of channels. There should be a power switch somewhere that turns on the system. I would think they would have put all the dimmer racks in the same place.
Reply
Re: Issues with driver on Windows Vista
Its giving me the same error of 'The device driver installation wizard did not update any of your software for your hardware device because it was not better then the software you currently have installed' Driver name: Visual Production (VPCueCAble) USB (01/06/2011 1.0.0.1) Then I click finish and I get 'Failed to install drivers. Did you connect CueCable?' Same thing I have been getting, and yes the cue cable is in place.
Reply
Re: dip switch settings..
Hi where do I set my dip switches so my control panel can work all 16 lights as I wish? I have 2 DP-415's and a stage setter 8
Reply
Re: Need to add light... Monoprice... 612745 to Emulation SW.
Can someone please help, I need to add light. to control with Emulation: Brand of light: *MFL.* Features: Ultra bright,18pcs 15w High Brightness RGBWA 5-in-1 Led Lamps .Red, Green, Blue, White, Amber colors mixing Electronic Dimming: 0 - 100% Beam angle: 38 degrees 4-button, DMX digital display on rear panel Operational modes: Static Color Mode, Program Mode, Sound Active Mode and DMX Control, Master/Slave model. 5/9 channels Built-In Programs Static color, macro colors, strobe and strobe...
Reply
Re: Scene to Scene Transition
I know jingles is the master at this stuff but just to make it a little easier for you if your not finding the fade time in Compu 06. Click on the page that has you design spot 250's(great light choice btw) and then go to page (on the toolbar at the top) down to display and click scene-fade toolbar. a toolbar should pop up on you ds 250 page. now you can control the fade time on any scene on that page. just select the scene and control the fade times at the top. let me know if this helps!!! ...
Topic
Dimmer noise - DP-DMX20L
I've got a dozen older DP-DMX20L units that are sending noise back into the electrical system and ultimately showing up in the sound system. Goes quiet at 0, 50 & 100% and the closer to 25 & 75% the louder the hum. Is this simply inexpensive dimmers or should I be looking elsewhere? It should be noted that ALL audio signal cables are balanced XLR type, everything is powered from the same panel with the same ground (I know, I installed it.) I actually didn't have this issue when I...
Topic
Blizzard HOTBOX exa Profiles
Are there profiles available for the Blizzard Hotbox exa LED PAR for the Emulation controller? I am especially interested in the 10-channel version.
Topic
default personality file?
Good morning. I'm learning to control our lighting rig, so I recently downloaded and installed Emulation 1.04.03 on my Macbook Pro (macOS Mojave). It appears that the default personality file is missing. I was able to get a limited set of personalities from one of my colleagues, and I can control everything via our MidiCon control panel, but I was hoping to get the default package (the download page cites, "2100+ Personality Files"). Is there an obvious place to find this file? Thanks in ...
Topic
Color 5 and CW Current Firmwar
Could someone please tell me the latest firmware/software for these units? Thanks
Topic
250 Design Spot plastic cover panels
I have had these Design Spot 250 lights for about 9 years and the rubberized coating on the plastic covers of the lights had deteriorated into a sticky oily mess. You couldnt touch the units you'd end up with hands full of a greasy glop. No spray solvent I tried would remove this stuff. Elation couldn't help me, they wanted to sell me new replacement covers. They couldn't even tell me what the coating was made of. Each time I touched the lights I had to run and wash my hands. My workers...
Topic
Eurolite Stage Panel 32
We need for our new Equiptment Profiles. 48-Channel LED Panels from Eurolite. Product Name: Eurolite Stage Panel 32. At the Picture you can se the Channels. Gehts from Germany.
Topic
Needing two profiles to add to Emulation software.
Needing profiles built for Chauvet Intimidator Spot 110 10 w and Blizzard Lighting Lazer Blade G. I have attached the manuals with the information. Any help would be greatly appriciated!
Topic
would the Light CoPilot II Control SRP8 power pack ?
Hi I have some SRP8 POWER PACKS and have the opportunity to get a Light CoPilot II Control Panel. My question is if the copilot II would control the SRP8 power packs Let me know Thanks
Topic
Another Successful show. Another batch of problems observed
Last night I did an event, where Easy Show was used to drive audio and lighting design. 1: The software did not reliably stop on marks as was selected in the show file. This NEEDS to be reliable. Sometimes it flat out would not do it. If there is a mark and you select "stop on marks", it needs to stop on the marks 2: Speaking of marks, this really angered me from a client perspective and then wasted time come show time. The client forgot to have a song in for whatever reason(who cares why at...
Topic
Easy View 3D: Meters vs. Feet
Ok, I've tried changing the Stage Settings units from meters to feet, which seems to work fine but only for the stage itself. Any objects I try adding still seem to be represented in meters. Any ideas? Thanks, -Brian Compu Show Build Date: 12/06/2013 Easy View Build Date: 12/05/2013 Easy View Version: 13.1205.0.347 Windows XP Pro SP2
Topic
No DMX signal?
I have a DP-415, just sliced through the tape on the box. It turns on when plugged into the wall, but I have the DIP switches set to "1", with the DMXIS control panel configured appropriately, and the "DMX" signal present light on the 415 isn't lighting up. I have a number of other DMX lights, and they're all working OK, just the 415 isn't showing a DMX signal based on it's indicator. Any thoughts? Questions? Thanks Chip Tredo
Topic
e spot led vs e spot led II
Hi everyone Does anybody know the exact differences between V1 and V2? The led seems to be higher power 45W vs 60W, any other differences? Does anybody know if an upgrade kit will become available for V1? thank you Best regards Raphael
Topic
575E not responding to DMX
I have a pair of Design Spot 575E fixtures that no longer respond to DMX. They are first in line in the DMX chain, and all other fixtures downline work. I can control the fixture using the control panel, but not via a DMX signal. Any ideas? Thanks,
Topic
Cannot download Compu Club 2006 manual
For some reason when I click on this link: http://www.elationlighting.com...es/compu-club-06.pdf ...it says that my pdf reader (Adobe) cannot read the file. Any help?
Topic
HOW to set dimmer switches on DP-415
Hi how do I set my dip switches so my control panel can work all 16 lights as I wish? I have 2 DP-415's and a stage setter 8
Topic
Intermittent error 05, 06 & 07 DS 250
I keep getting intermittent error. When I brings the lights home, I get no error but at the show the fixture gives me 05, 06 & 07 error, I transport in the elation ATA dual case. I don't want to ship it n, because that alone is $100 round trip from Georgia, Also I have owner 6 of these fixture and error 5, 6 & 7 are the only errors I get ever get.
Topic
ART SSC not responding to eManager
My ART SSC has a firmware v1.14. I want to upgrade it, presumably using eManager. After installing eManager, it properly lists my device at the correct IP address, indicates that it is "Ready", but lists no other specs for the device in the right-hand panel. When I try to perform any task, specifically 'Upgrade', it says 'Preparing' but sits there forever with no progress. What could be causing this software to not communicate properly with my device? I also installed ArtMan, which connects...
Topic
front button control on ART-1024
I am an end user of a system put in by a local company, with limited knowledge of the system, other than trying different things in the programming of the controller, using the software provided. I have a few questions: When the system is on, I can select a scene using the front panel of the controller, but that scene only last about 60 seconds, then the controller reverts back to it’s original state. Question #1: Is there any way to program these buttons and/scenes to run for an extended...
Topic Featured
Emulation & Emulation PRO Fixture profiles
Elation Lighting XML fixture library file. This XML contains all of the Elation Lighting products as listed below. This list was last updated Feb 27 2017. If you do not see a fixture you need, please email Support@elationlighting.com and request it. ACL 360i Arena Par Arena Par Zoom Arena Q7 Zoom CMY zoom 575 ColorTone 100 ColorTone 50 Colour 5 Profile Colour Chorus 24 Cuepix Batten Cuepix Blinder WW2 Cuepix Blinder WW4 Cuepix Panel Cuepix Par 300 Cuepix Strip TRI Cuepix Strip WW Cyber Pak...
Topic Featured
Elation Fixture profiles for GrandMA2
ACL 360 Bar ACL 360 Matrix ACL Bar Arena Par Zoom Artiste Dali Artiste Davinci Artiste Picasso Artiste Van Gogh Chorus Line 16 Colour Chorus Dartz 360 DTW Blinder 350IP DTW Blinder 700IP ELAR Quad Panel eMotion Fuze Par Z120 IP Fuze Wash 575 Fuze Wash Z120 Fuze Wash Z350 Level Q7 Paladin Platinum 1200 Wash Platinum BX Platinum FLX Platinum Profile LED Platinum SBX Platinum Seven Platinum Spot III Platinum Wash 16R Pro Platinum Wash ZFX Pro Proteus Beam Proteus Hybrid Protron 3K Color Protron...
Topic
AYRA INTENZ CB600 LED
Who can create the profile for elation Evolution for the device .... Ayra IntenZ CB600 LED Matrix Panel .. Please help. I could send the data via mail or dropbox mfg
Topic
Compu Pro 06
Anyone having a problem with CompuPro crashing a lot? I've tried it on two different PC's and it happens on both. Usually when I double click on an Init button. I downloaded the latest version fro Oct. 06 but it still happens. I won't be able to use this software in a show if its going to crash at any point during the concert.
Topic
need some info about changing from XP to vista on compuware!!
hey all. i presume mikey will answer this question. i am about to buy a new laptop a dell inspirion 1501 to be exact. with AMD Turion™ 64 X2 Dual-Core Mobile Technology TL-50 and FREE Upgrade to Genuine Vista Windows Home Premium with 1GB of memory LCD panel 15.4 inch Wide Screen XGA Display with TrueLife™ MEMORY 512MB DDR2 SDRAM 533MHZ, 1 DIMM VIDEO CARD ATI RADEON® Xpress1150 256MB HyperMemory™ (Integrated). i was wondering if this is enough to run compuware and get good speed and graphics...
Topic
Compu Pro 06?
I am interested in purchasing the Compu controller for my church. I have a couple of questions before I do. We have been using a Show Designer 2 for the past 5 years, so playing around with the Compu Pro has been very different for me. In order for me to change over I will have to set it up to work close the SD2. I have had the software downloaded for a couple days and have been trying to figure it out, I have all my fixtures installed and my stage layed out. The first question is, when you...
Topic
Compu 06 Question
I am wondering if I can rearrange the order of the scenes on the master page? When in the page mode, you just right click and drag it where you want it, when in the master page, when you right click and drag it copys the scene... All I can get it to do is put them in alphabetic order.
Topic
Compu Live: What is the proper name?
In the manual it is called Compu Live. In the product page of the website it is called Compu 1024EC, Compu 2048FC, Compu 2048FC+. At various internet stores it's been called Compu 02, 04 and 06, and Compu Club and Compu Pro. And I've seen references in this forum to Compu Pro 06 and Compuware and multiple variations of that. What is the proper name(s) and what are the differences? Thanks!!
Topic
Has anyone made a profile for Design spot 250 yet?
Just purchased some design spot 250's I need a profile Fast for this weekends shows. I know how to edit compu-club 06 files and will edit the power spot profile to meet the needs of the design spot BUT I don't have time to do so before my shows this weeked, can anyone help by sending a profile they created?
Topic
DMX help with Compu 06
I'm setting up CompuPro to work with existing lights at a club. They have 6 Track Spots that use 7 channels each but are addressed at 16 channel intervals, 1, 17, 33, ect. When I add them to a page in CompuPro it addresses them in order. Whats the best way to set them up so they have 9 blank channels between them. Thanks.
Topic
Basics of Compu Live 06
I work for a DJ/Production Company and was given the task of trying to get 8 Coemar Pro Spot 150lx's to work with the compu live software. Thus far, I have basically just added 2 fixtures (8 takes up too much room in the house) to turn on with the software. what do i do next, how do i adjust pan/tilt/gobo/color of these lights with this software. i click on those demo buttons that show up in the beginner mode and nothing happens. and how do you do just the basic of programming for these things?
Topic
Need help with compuware
HI, hope someone can help with this. I am running compuware 06 with the 2048fc+ box and i have created a lighting intro in easyshow and created a video to go along with it. i am running the video through a numark dual dvd system with the avm01 mixer. the question i have is how can if possible make the video trigger the light show to start at the same time . right now the way i am doing this is by hitting the button to the video at the same time i start easyshow and its always off by a second...
Topic
Question About Compu Live 06 Compatibility
Hey guys, I have read the various threads on the compu names and version but still want to make sure... If I buy the Blue Compu Club Dongle, will it be compatible with Compu Live 06? -Homeboy
Topic
Is there a place where I could. . .
Is there a place where I could just buy the DMX to USB dongle that I need. If my understanding is correct the software that comes with the bundles is the Compu Live '06. Am I right??? That way you can just download the free version and get the dongle??? Is this possible or should I just buy the whole thing??? Thanks. Jthtiger
Topic
Compu 06 Help
I just changed our house lighting over to a dmx dimmer but I am having a problem. It seems that when it is dimming the lights, its doing it in small steps, which is making it impossible for me to do much of a fade without it not being very noticible. I have used the same dimmer on the stage lights for a while now, and have never noticed it, but Ive never had fade times over 5 seconds on them, the house lights are around 20-60. Thanks, Justin
Topic
Easy Show: Show Video on Second Monitor
I am using Easy Show with Compu 06. I have a question about video playback. How can I have the video show full screen on a secondary monitor? (The primary monitor is the laptop screen, and the secondary monitor is what would be projected during performance.) I can drag the monitor window to the secondary monitor, but when I hit the full screen button, it still displays on the primary monitor. It seems like there should be an option to control this, but I can't find one. Thanks!
Topic
compuware 2048fc
hi, i have a question, the '06 version that i am using right now, cannot seem to recognize the interface that was included with the package, i've installed the dmx driver, i've read the manual over and over, but i still cant fix the problem. . the manual says that when i open the program i should see the release date and the one with red letters, the only thing i see is the release date (compu 2006 jul 3 2006) thats what it says what seems to be the problem? and how could i fix it? thanks
Topic
compulive 06 (easy show)
Hi, I have just purchased elation compu live and i am trying to sync a show to music. I have found that useing easy show will work best. However i can't get my saved scene into easy show. Every time i try and import it, a new bar on easy show will pop-up but no lights. Please help!! Thanks, sky
Topic
show designer 3 complex chase problem
I have a disco dance floor that I am trying to control/chase. Each square panel has 9 concentric rings of dimmable neon tubes in three colors controlled by DMX. There is an outer, middle, and inner neon tube of red, white and blue. I created a fixture profile with nine attributes, each one of type dimmer. I then programmed 9 presets so that I could turn on different colors of neon. For instance, an outer red, a middle red, an inner red, outer white, etc. I then created a complex chase,...
Topic
Compu 06 - 3D Viewer - Construction Mode
Hey guys, Just a long question, but hopefully a quick answer: When I'm in the Construction Mode of the 3D Viewer, there are 4 windows: Top Left - 3D Stage View Top Right - Object Parameters Bottom Left - Plan View of Stage Bottom Right - Front View of Stage My question is, is there any way to zoom in/out in the two bottom views? I tried the obvious scroll wheel that works in the 3D Stage View, but no luck on the bottom windows. It DOES say "Limited Mode" in each of these windows. Does that...
Topic
Transparatent Chases With The DMX Operater Pro
Hey guys, I have a question about how to program transparent chases with the DMX Operator Pro. I have 8 Led's Fixtures setup on 2 Fixture buttons on the DMX Operator Pro console. 8 Led's 4 DMX channels per LED.So 2 LED'S per bank per fixture (4 leds on fixture 1,and 4 on fixture 2). The Led Break down is Channel 1 Strobe/dimmer 2-4 is RGB Color's. With that configuration in mind, here's my question. While running a scene from the top panel, I want to use a chase as a transparent chase to...
Topic
Microh led panel profile
Hey guys I'm looking to get a microh led panel profile made up here's a link to the manual. http://www.microhpro.com/man/ledpan.pdf Please email it to my email when you get the chance. Thanks in advance
Topic
Global Edit of Values for One Light + Right Click to Fade
Hi, Currently I am running 4 Design Spot 250s and an assortment of Elation LED fixtures on CompuLive 06. I often find myself getting to a gig and spending an hour or more adjusting the X/Y and Focus channels for EACH DS250 in EVERY (50+) scene using these lights. I adjust the X/Y so that when the beams hit the floor at THAT venue it hits the right performer. I adjust the Focus so that the gobo is clear (focused) at that [new] location. I would like to know if there is a way to adjust one...
Topic
X-Keys Compatibility with CompuLive?
Does anyone know if X-Keys are compatible with CompuLive 06? http://www.xkeys.com/xkeys/xk12884.php Thanks, Brian
Topic
Fading between scenes
Jingles: I have the compu live 06 software. The lights I have are the elation pro spot 250, I've been trying to fade into scences, via programing...slowly bring the lights onto the crystal ball, instead of a fast bang etc...I've read some of the other posts where you duplicate the scene and try to bring it in by fade times etc, but when I do it I get the same a jumping of the color and strobing somewhat...I read an old email, I think it was under basic programming...posteed on the 17th of...
Topic
External MIDI Trigger for BMP Rate
Hi, I'm running CompuLive 06. I currently have chase switches (Step 1 = Red, Step 2 = Blue, Step 3 = Green, etc.) set up using Easy Time. In the Easy Time editor I have linked the appropriate channels to BPM, as explained to me by John Lopez in a previous post a while back. This allows me to control the chase rate via the Audio Analysis interface using "Analysis", "Manual", or "Learning". I want to take it one step further now... Is there any way to allow an external MIDI device to control...