Skip to main content

Tagged With "Panel Firmware V1.0.15"

Everything
Reply

Re: E-Builder

Jingles8302 ·
Hi! No worries! I actually kept a Dropbox folder of ALL Emulation and E-builder releases i got and that we saved, here is the E-builder folder I have: https://www.dropbox.com/sh/8tg...hO3bOKXx61va_2a?dl=0
Reply

Re: spot and wash 250

Jingles8302 ·
do u have any control over the one that is moving on it's own? is there any type of light that tells u it is recieving a DMX signal? also i just checked and if u have the power spot and washes the spots are 15 channels which would mean the second one should start at A016. and if this is so is it panning and tilting on it own or just one or the other. can u tell me what u have and at what addresses?? i need to know if they are power spots and washes or what. and also if the washes are cmy or not.
Reply

Re: need to know???

Jingles8302 ·
hey guys im doin it now but i find cause i have three reds in this fixture i think i does not sem to want to let me use 3 of em just two! also am i to click on the channels and enter in the numbers and signs for the channels patched to several diffeent outputs?? so for example that says 1= 0+1/40/60 and i enter in that in the box?? am i doin this right??? help me!! peace! jingles out!
Reply

Re: Is there a place where I could. . .

tylerherron ·
ok cool thats just one more thing i need to save up for. arg this is getting expensive for a 15 year-old teenager. jthtiger
Reply

Re: Compu Live Questions

matchless1 ·
Hi John, Thank you for your responses as well. 1. I tried what you said and made my chase a Scene using Easy Step. After that I was able to control the speed via the Live Button Toolbar. So, in other words, I did not need to do anything further using Easy Time. I tried it any way (yellow button making the channels Easy Time), but it just seemed to mess up my chase, so I went back to making all channels Easy Step. I notice that the F7 and F8 keys allow me to adjust the speed up and down. Is...
Reply

Re: Compu Live Questions

elationpro ·
Brian, I am really impressed on how you picked everything up. So to move forward, you can achieve the tempo your looking for by activating the Audio function in Compu Live. Step 1. In the "controller" drop down menu look for "Starting parameters". Then in the Options box, choose "Audio/Midi" and in this new window, click on the check box with the speaker icon. Then close all windows. You will be prompted to restart, and the Audio Analizer box will open automaticly. Minimize this for a...
Reply

Re: compu 2006

evolution78586 ·
Hey Guys, last night i had a show and the compu program ran good! It gave me that shutdown message one time the entire night (3hrs) but im stiil having a problem with one fixture (spot).When i click center so that all the lights can face up, that one fixture faces the front (sound guy)I've tried the RPAN and RTILT and it stays the same.Last night i also ran into a prob. with another spot. I was getting a RSER message from it.I wasnt able to use this fixture last night.Another thing towards...
Reply

Re: Is there a place where I could. . .

anthonywhite ·
You should check to see if they have student pricing with their software. Some companies have educational versions that are fully functional.
Reply

Re: Compatibility Issue solved.

pulighitng ·
Mike, This might be a stupid question but have you addressed the units and the dimmers so that they overlap addresses? Dimmer DMX address 1 along with one of the scans If they overlap they will act like they are carping out when you use an attribute in a moving light. Dimmer unit 1 address =1 Unit 2 address=5 scan 1 address =9 and scan 2 address=15… The magic 260 will allow you to chose what the start address is for each fixture.
Reply

Re: I Can't Decide!!!!

elationpro ·
Hi Choirboy, 2400Watts is exactly 20 amps. the DP-DMX20L can only handle 15 amps or if you change the power cord to a 12gauge cord, then it can do the full 20 amps. I would recommend the following. CYBER PACK - 20 AMPS 2400WATTS ETL APROVED DP-640B - 40 AMPS 4800 WATTS UL APROVED. Best regards,
Reply

Re: Hey Guys!!! I'm Back . . . again

tylerherron ·
Hey John, James told me to tell about this. It is a quick story that I experience on tour. Our lighting guy is 16 (yes they put a 15 and 16 year old in charge of all that equipment, scary huh?) He really isn't a lighting guy he just knows how to run the software. He really just wants to play in a band. Anyways for awhile I have been learning from him, but now it is different. Since I've been on these forums as well as the ADJ forums I have learned ALOT. Well at one of our shows we had the...
Reply

Re: Show Designer 3 manual question

davie ·
I have the printed manual that came with it, every page of it has at LEAST 10-15 missing characters, it's very frustrating. Mostly 'r' 'p' 'w' 'y' and 'n' I figured out my problem, settings were carrying over into other presets, but I figured it out
Reply

Re: Design 36 LED

pulighitng ·
I guess that is what i was waiting for it is a shame that 7 of the 8 programs are bad and that is that. I will be ordering the next twenty units sometime this week only i will be going with the Colorado1 from chauvet. I have ten of this units and the feature sets and service are way better and the price is $100+ better then the design 36. I am also starting to have problems with my design 60 units and will be shoping for another brand to complete my need for 15 more units.
Reply

Re: Stage Pak 1 how to set up?

tylerherron ·
Oh man I can't tell you how much I laughed at that! Ok anyways, DMX, it really is a cool thing. Here are some basics. DMX stands for D igital M ultiple X . It is a way for each and every (DMX Compatible ) light, made by any manufacturer, to interact with an universal DMX controller. In a standard DMX protocol (called 512-DMX protocol) there are a total of 512 "channels" In order to get your lights to interact with the controller, you must address them. There are 2 ways (that I know of) that...
Reply

Re: Stage Pak 1 how to set up?

Jingles8302 ·
on a side note. your spot 250 uses 6 DMX channel and the vue 3 uses 9. 9+6=15 DMX channels total. so you only have room for maybe one or two pars on the stage setter 8. might want to look into a bigger controller. like jthtigers DMX operator 192.
Reply

Re: Compu live Dec. 21, 2007 version; movie record error

perfectmixsoundinc ·
Thx for the info. I have the compu club blue unit so I guess I am out of luck on this feature, WILL THE DEC 2007 VERSION FUNCTION ON MY COMPU CLUB BLUE I/0? the Oct 2006 version worked fine with it. also it seems like a bad decision to restrick recording unless your dongle is connected when you allow us to create without the dongle thus I don't bring it home which is where I do my configs, again I create files at home for client/venue and the interface stays at the venue.
Reply

Re: black lights

serraava ·
I apologize in advance for the very long and off topic post I am about to post. SCR dimmers work by chopping the sine wave of AC. This is how they 'dim'. AC is a wave. DC is a line. Now when power is created, is is created by a magnet spinning in a coil at 60 times per second, thus 60hz AC. This is how and why the wave is created. The little sine wave above, the start as 0 degrees, the first peak point as 90 degrees, the next mid point as 180 degrees, and the bottom peak point is 270 degrees...
Reply

Re: black lights

serraava ·
Continuing on now: The buzzing noise is known as lamp sing, it's caused by the power being turned on and off really fast. The way this is fixed is more expensive dimmers have what is known as a choke after the SCR so the power change is as dramatic as on/off. The better the quality of dimmer, the less lamp sing you will get. Now why non-dim isn't really non-dim. Despite you setting a dimmer to non dim, either via the pack or the console, the power still passes through the SCR and choke. So,...
Reply

Re: Design 36 LED

elationpro ·
Hi PU.. Believe me, I am also glad our R&D department jumped on it. I just wished they would have told me, instead of telling me they couldn't. We will have lens kits for them as well, but it looks like a 15 and 45 degree kit. I know they are working on an 8 or 12 degree lens kit, but nothing yet. FYI.. Price on the DLED 36 went down a few dollars so you'll be able to get a better price, and we are introducing the DLED 108IP, which is a DLED 36 with K2 Leds, and IP65 rated. Send me an...
Reply

Re: Newbie looking for help/advice

christianpyro ·
I am going to try out the compulive software that you guys mentioned. Can you download it from elations website? and if so is this just a trial version, or will it work for me? I also understandd that each light you use takes up a certain amount of dmx space. for instance the moving wash lights that I bought take up 15 dmx channels. If I used the compulive sofware would it have a total of 512 dmx channels that I could use? And if so, would this mean that I could run a total of 34 moving...
Reply

Re: Where do I get fixture profiles for Elation DLED TriBrick 36 and Tri64B?

Jingles8302 ·
hmm the TRi bricks i dont know if i have a 15 chanel profile done for those. you cna try to make one if you would like. all you do is enter the presets and there values for each channel. just like you see in the manual. and what is wrong with the dled 36's? do you own these fixtures? sincerely,
Reply

Re: Where do I get fixture profiles for Elation DLED TriBrick 36 and Tri64B?

bdunard ·
I am going to run the tri brick in 15 channel mode. I am going to use TriPar in 6 channel mode just like my DLED 36's. Yeah, today was supposed to be the day with the new toys...oh well I am plunking away on a Gateway for the time being.
Reply

Re: Where do I get fixture profiles for Elation DLED TriBrick 36 and Tri64B?

Jingles8302 ·
Very cool. ill start on that 15 ch. profile for you. sincerely,
Reply

Re: Newbe Question

chrisbozarth ·
Is there an easy way to make a Blackout seen to make all fixtures in the universe go to 0?
Reply

Re: DMX Programmer Question

djargyx ·
I think I've got it figured out now. I believe that Fade drops all active channels to 0 (EDIT: for black that is; Fade transitions to the next channel values otherwise). Unfortunately I just picked up some Chauvet Colorstrips and their RGB mixing requires channel 1 to be at 210-219 and then mixes RGB values on channels 2-4. EDIT: So, from black it has to fade through programs on channel 1 (I haven't tested, but I believe having black w/ channel 1 @ 210 might be ok for in between steps, still...
Reply

Re: design 108

serraava ·
I think your best bet would probably to go with DLED36s since they come stock with the 39 degree beam angle. You can also get roughly 2 for the price of one DLED108. Have you looked at the Opti RGB with lens kit? This might be an option since it is cheaper then the DLED36s, with the lens kit. Here is another idea, look at the Opti 30 RGB. You should be able to get between 10-15 at that price range. You can use those 10-15 Opti 30s to replace the DLED36s for your back drop wash and move the...
Reply

Re: Fading to black

ronr ·
I just tested a Magic-260 with a Design Spot-250 and was able to program a fade out. To program a fade out, set your dimmer to zero (0), add your desired fade time and save it to a desired page/button location.
Reply

Re: Fading to black

jaym ·
I was back it again this evening and tried several of the recommendations with no luck. ronr -- those where the exact steps I took. Even with my dimmer set to 0 and a fade time to 30 sec, it snaps to a black out. No slow fades. John -- could not find any snap or cross fade feature on the Magic 260 and nothing is mentioned in the documentation. Since we open the show this Friday. I have trained the operator to use the master fader. I'll keep looking for an automated solutions. Let me know if...
Reply

Re: Compu Live Question

partime ·
I don't have an answer for you. I am new to this type of lighting control. I can't find out how to get started with the basic programing for 15 par cans, 3 RGB and 2 Elliosodials. Help. I also receive a message about a faital error. A second install have a problem with a flickering Pro Bar. It seems to destroy the bulbs. Any recommendations? Partime
Reply

Re: Pan Limit on DS250

matchless1 ·
Man, I hate it when I spend the time to type out a long post, then turn around and figure out the answer to my own question!! Anyway, instead of deleting the question, I figured I would post the answer in case anyone else had the same problem: It seems that my INIT scene in my Design Spot 250 PAGE had all the pan channels set to 85...go figure! So, of course I just set them to 0, saved, and now I'm rockin' and rollin' again. I guess sometimes you just have to ask the question to trigger the...
Reply

Re: Major Probs with the Magic 260 App

frankschlender ·
[QUOTE]Originally posted by Surge ProTech: Sergio, thx for the quick reaction. It shouldn't be a prob to run the heads with only 15 channels, it works with the 16 channel preset smoothly. The App does not put them in the right order, that's the problem. When I change the setup of a fixture and load it up again, I get two different sets with the same name, that also shouldn't be the case. Weird. I assume, I will have to erase everything an to try again and again. At some point - I have no...
Reply

Re: Global Edit of Values for One Light + Right Click to Fade

ebaclights ·
There is a way to do fade/no fade using the Midi controller. You can either do it with the virtual controller on the screen, or have an external one. Unfortunately you cannot use a single button to turn the fade on and off with the virtual board, you will have to use 2 buttons, or one of the faders on the board. You can use one button for On/off using the external board because it will latch when you press the button. To set this up... 1. launch the midi controller on the screen. 2. If you...
Reply

Re: lighting que fades

Jingles8302 ·
Are you/ have you tried using the scene fade toolbar? if you simply right click on the blue title bar on the fixture page (the bar that has the text of the fixture for example on the bar it will say Design Spot 250 or w.e. you may have) right click on that bar and you will see a few options come up. select "Scene Fade Toolbar" and it will appear at the top on the fixture page. all you do is click on your scene. check the check box to the left side of the new area. and add a time to only the...
Reply

Re: Show designer 3

serraava ·
You should have no problem transferring to the new console and not have to rewire and readdress your fixtures. The extra universes are in case you need them, meaning more then 512 channels of lighting, or can make your life easier at times. For example, if you have lights at one side of the room and lights on the total opposite, instead of looping them all together, run one DMX line to one side and another to the opposite side to save on cable and stop possible issues that may arise. As for...
Reply

Re: Design wash 250's

wyatt20019 ·
i can set the dimmer to 100% but thats all. it wont even do anything at 0%
Reply

Re: LED diffusion

serraava ·
So you are looking for something very thick like an Octo Strip covering then. Diffusion won't help much. Getting it away from the LEDs more will help eliminate individual LEDs though. As for color shadows: This is 2 DLED 36s 44" away from the wall, 28" apart from each other. The speaker stands are 15" away from the wall and 2" in diameter. The DLED on the left has the stock diffusion filter in it, the one on the right does not. As you can see, without the diffusion, the DLED increases in...
Reply

Re: Resetting a Scene Setter 24CH Dimmer Console

surgeprotech ·
Alex, This is how to restore the password to factory default. Press and hold the following three buttons, "Record", "Edit" and "Hold". Then sequentially press FLASH keys 5, 10, 15, 20 and release the first three buttons. Also make sure that you have the correct power adapter. Let me know what happens
Reply

Re: Radiance hazer profile

Jingles8302 ·
compu Live profile? if so then tell me the dmx values and how many channels. like channel one is duration 0-255 channel two is intensity 0-255. Let me know. Sincerely,
Reply

Re: Design Spot 250 For SPOT LIGHT

damenace ·
Hey guys i a m trying this thing but its really not working out for me.. like i am connecting the master and slave fixtures correctly or so i think the lights follows and everything but then there are some point where the slave fixture wouldnt go or go to somewhere where i dont what it to.. i am using two fixutres on a truss.. i am posting this video soo u know wat i m talking about http://www.youtube.com/watch?v=T9bVCu0vdoI After 0:42 into the video u will see what i am about everythign...
Reply

Re: Understanding the DMX Operator

Jingles8302 ·
Yes that's correct. and DMX is really a constant data stream anyways. there is a certain series binary of code every time the faders moves up or down to any given value and even a "0" value code. which is why you still get a dmx signal even though all your channels are at 0. make sense? but there is no need to think of it at that grand a scale for you yet. haha. Never seen anyone ask that question before. ha. disclaimer i am not a DMX expert so if anyone finds a fault in my explaination...
Reply

Re: operator 192

geek3 ·
Well, Correct me if I am wrong but that board is mainly for intels. you don't need to setup a fixture profile for dimmer packs they simply dimmer (0-255) the dip switch need to be setup for channel for ex if you want dimmer pack one to be channels 1-4 set it as ch 1. if you want dimmer pack 2 to be 5-8 set it as 5. also there is probably a way to make it run on 1ch 2ch or 3ch. if you want ch1-4 turn all dip switch to off. Also note this is not a DMX dimmer pack. it is an NSI Miroplex one...
Reply

Re: DMX OPERATOR CONTROLLER... Strobe help please...

redx ·
COLORKEY LED Par 64 10mm V2 6 channel dmx and Deliya par 64 led 4 channel dmx. One at a time does the same thing. Singularly on a 2 foot DMX cable from the OPERATOR. Ive run speed and fade variations during and after playback still the same.It slows down even more when fade time is set to 0. It has an uneven strobe effect if fade is above 0. I am seeing about 15-20 fps when in program mode. I then either record the scene and remove the program button and the speed slows down to about 5 fps.
Reply

Re: Power Question

serraava ·
Hi Matt and welcome to the forums. What types of fixtures are you plugging into the controller? You say 4-8, but each of those lights might be 2000w a piece (doubtful). The other thing is it is possible the outlet is a 15 amp outlet and not a 20 amp outlet. According to standard, 20 amp Edison has one on the prongs at a 90 degree angle with regards to the other. See this image for what exactly I am talking about. Almost no one follows this standard, but it is possible, especially in newer...
Reply

Re: Power Question

surgeprotech ·
Matt, Is this the American DJ SC8 System? If so, it's limited to 15 amps per switch pack. So you'll need to purchase an additional switch pack in order to run two different circuits.
Reply

Re: Generic profile for a 5 chnl LED PAR can (MBT)

bobc ·
James, Thank you for the help. The manual has no description of the DMX traits. If I could have an OM button with sliders 0%-100% for each of the 5 channels that would be quite helpful. I am still only on page 39 of the manual, so I don't yet know if this is possible, but a few specific color buttons (like that on the X-Scan page I added) would be over and above. I would understand if this not possible, because I suppose I would RGB the colors myself with the sliders and save the scene "as I...
Reply

Re: Reprogramming "Init" page causes issues in other scenes.

Jingles8302 ·
I dont know about every one else but modify the init. so instead of 0 value i have them tilted almost to 127 and panned about to 86. I have never gotten the green value disply like you are tho. Send me your show file and ill take a look. You remember my email? Sincerely,
Reply

Re: noob questions

davidpatton ·
I've learned that on my moving-head lights, the pan/tilt won't go below the value I have set in the init button init-value for example, I hit the init button on the master page, everything init's, then I hit scene 1 on the master page and any lights that should pan/tilt less than where they are at init, won't move I editted the init button on the fixture page back to 0 tilt/pan and then things worked what's keeping them from bring able to move past the init values??? I've read a little about...
Reply

Re: noob questions

davidpatton ·
so the INIT button on each fixture page has to have everything set to 0 (zero)? I had my moving heads at 360-degrees pan and 50% tilt so they do not have to move so far for the first scene, but if the INIT button is setting minimum-values, then I'll change them back I found another thread that appears related: Reprogramming "Init" page causes issues in other scenes when you say you modify the INIT scene, do you mean on the fixture page or Master page? does the INIT scene on the Master page...
Reply

Re: DS250 v. DS250 Pro

serraava ·
Have you tried resetting the fixture via the console and/or on the fixture itself? Every once-in-a-while a fixture will do that on me and a reset fixes it. Also, which console are you using? It might be an issue in the profile if it is doing it across more then one fixture. Are you using an old DS250 profile by chance? The old DS250 was at 0% intensity when channel 12 is at DMX value 15 vs 0 for version 1.3 and the DS250 Pro.
Reply

Re: Design Wash Led Question

serraava ·
Well, the Designs will blow away the Opti Tri. The LED 60 has 180w of LED behind it and the LED Pro has 324w of LED behind it. The Opti Tri has 54w for comparison. Size wise, the DWLED 60 only has a 15 degree beam vs the 25 degree beam of the DWLED Pro and the Opti Tri. Keep that in mind, because you will need more DWLED 60s to wash a stage then the other two fixtures. Also, the Opti Tri is using tri-color LEDs, so no color shadows. Not sure if this is an issue or not for your application,...
 
×
×
×
×