In This forum you can discuss tips, tricks, and troubleshooting for Elation's Next Generation Compu Live software, "Compu Show".

If your curious to know the difference between a compu cue and a compu Cue Basic or all of out other new interfaces Look here.

Any questions please post here.
Original Post
Jingles, I'm a little confused. I inquired from you on this before but never got a decisive answer. I have an SD3 but wish to have a dongle to allow me to visualize what I'm programming on the console utilizing 3D EasyView. Now this chart show me that I have to at least get the CompuCue to do so. However, only the CompuCue Basic shows having (512) IN but no acess to EasyView. Thoughts on the matter or am I missing something?
Lazer, as you can see above the Compu cue Basic, has 1x512 IN and 1x512 OUT. So you should be fine with a compu Cue Basic. Unless you need more than one universe of input.
is there a way to get past the 64 bit os, is there a newer version of software available. I loaded software from a CD. software shows compu 2006 up on top.
I think the latest Compu Show is downloadable from Elation's web site.

The concept of having to immediately download new software off a maker's web site isn't anything new or unusual these days. Drivers and whole software packages can be obtained and installed in this manner.

This works just fine on 64-bit Windows 7 Ultimate. I know. I did some major shows with it this way.
Hey James

I have the compu 1024 EC module for compu live my question is.. does it work with compu show (the new software) ... if not .. why?

Thanks Danny
Hi. Welcome to the forums. No the 1024EC will not work on compu show. the compu show software was designed to be used with newer updated interfaces. Those interfaces are the Compu cue Basic. compu cue, and compu Show SD and SD+. We needed to design new hardware due to the fact that the 1024EC and 2048FC models were incompatible on a 64 bit operating system. also we wanted to add new features to the hardware. BUT, you can or maybe able to upgrade your 1024Ec to one of the new models for a fee.
see this thread.
however you must be within your warranty period for your 1024EC.
HI, My current compu show program has crashed. I have uninstalled on my windows 7 and installed your current version of compu show. Although now I am not getting a connection to my compu cue basic interface. Have I downloaded an updated version of compu show that is now not compatible to my interface? Thanks.
Hi C-Spar, most likely you just need to update the firmware maybe.

go to your C drive, then compu show folder, go to tools, then in the firmware tab try doing the update. Let it run and restart the dongle. Once it is done, close tools and try to re-start compu show.
Let me know.

Add Reply

Link copied to your clipboard.