Skip to main content

Hi All,

I was wondering if it is possible to use the Compulive software with a Scene Setter 24? I want to program all of my scenes using the Compulive and then use the Scene Setter for fade times between each scene. I am using 6 Elation Design Spot 250s, 21 American DJ Mega Bar LEDs, 4 American DJ Mega Strobes, and an Antari Fazer. So I would do all my programing on Compulive and then simply want to set the scenes to faders on the scene setter. If possible I would like to have manual control of the fixtures too, but that would be a luxury at this point.

Thanks for the help!
Original Post

Replies sorted oldest to newest

I found out the kicker. You have to assign a scene to a channel and when you move that channel fader it will play that scene. but since you only have a SS24 you limited I think to only 24 scenes being triggered with that unit as DMX input. not sure if you can "stack" triggers or have multiple scenes trigger by the same channel fader.
Sincerely,

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×