Cyberlight Turbo Compulive Profile

I am pretty sure that I can make one of the existing profiles work...However, the CMY channels although they are the correct colora appear to be reversed. What I mean is to get white light I have to max them all out which exactly the opposite of what you get when you use the color wheel thingy on the preprogrammed buttons. When all three channels are at zero it should be white, instead no light...Not to mention the fact that the color on the "color thingy" in no way matches what the cyber beam is. Anyway I hope this makes sense. Is there any way to fix this condition either in the page setup or in the profile. Thanks in advance.

Pitman, sorry I didn't see this post earlier. You may be able to go into the page settings and invert the CMY channels output.
Sincerely,

Here is how you do this.
go into the page settings and go to the channels. Then expand your cyberlights and find the CMY channels. Click on the Cyan first. Then you will find a box that tells you the channel number.
Here is a pic:

you see where it shows on my pic 2=? and i have a highlighted section that gives an example of the min and max values. so if you do say 2= 2/255/0 that should reverse the output of the channel. do this for all the CMY channels for all of your fixtures. Let me know how it works.
Sincerely,

Will do buddy...Thanks.

Shane

Thanks for pointing me in the correct direction...Got it fixed....One thing to not is that the setting works off of percentage as indicated by the "%" so I changed the patch to be "2= 2/100/0" and it worked like a charm...When I used the dmx value even though it accepted the value it didn't work as expected.

Thanks again

Shane

Ahh ok. Cool. I had never used that function before. So we both learned something.
Glad you got it.
Sincerely,

Yes we did.

Thanks again for your help.

Shane