I have an enode 4 connected to a Strand Palette Vl via a router. Desk is setup to output 4 universes over the network. I have checked all the IP addresses. The node shows I have a network link and when I send output from the desk the activity light flashes. However the output ports I have set up are not being activated. Running dmx universe 1 direct to an input port does activate the corresponding output so it seems I have missed something in the network. Any ideas?

Original Post

Try resetting the unit to Factory Settings. Go to User Preset menu, and select Factory Settings. After the reset, the IP address will be set to 2.10.10.2 by default. Set the IP address to something unique; something that isn't already being used by other devices in your network.

Add Reply

×
×
×
×