Focus Spot 250 error 01er and 03er

HELLO. please check the wiring harness form the PCB to the tilt and pan stepper motors. if there is no coninuity there is a torn wire somewhere in the yoke.

Best regards,
Gines Gines
elation service manager

which is the pcb and tilt and stepper motors? i have the covers off and im trying to find which harness that is, as for the wiring in the yoke, would that be the wires that are all bundled up that run from the base all the way to the yoke?

well, i figured out which are the steppin motors, i unplugged and plugged again the wires to all the motors and nothing, when i power on the unit, the yoke moves, the gobos, the lens as well as the pan movement, it just gives me those errors, and wont get into its reset starting position, your the pro, what am i looking at if i send it in to you for repair? i live in miami, im gettin frustrated

hello there. if you have the covers removed. give us a call at 323 213 4593.this will be faster.

Best Regards,
Gines Gines
Elation service manager

okay, thanks, who do i ask for, i can call tomorrow, tuesday afternoon.

The office is closed now. You need to call between 9am-5pm PSt time (L.A.) I believe the number that was posted is a direct line to Gines himself if not just tell the person who answers your situation and you will be taken care of.
Sincerely,