Skip to main content

Upload tool: C-Loader or USB Stick

Fuze Profile Firmware V1.0.12

What's new:

UPDATE NEEDED DUE TO CPU SUPERSEDED 2U/4U/6U CHANGED FROM STM TO GD TYPE. Updating of older unit not needed unless unit is being serviced.




You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com

Last edited by Jingles8302
Original Post

Replies sorted oldest to newest

Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded.

Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×