Re: Fuze Profile Fixture Firmware

What's new:

Noncritical update due to IC change and global supply issues.

You should not attempt uploading the firmware to the fixture unless you have read and fully understand the instructions that came with the relevant Fixture firmware uploader for your fixture. Clicking this link will take you to the Software uploader section of our website so you can pick the correct uploader tool for your needs and fixtures. If you do not see your fixture listed, please contact Firmware@elationlighting.com

9/29/201:22 PM

❤️ 0

Original Post

Replies sorted oldest to newest

RainschnMember

Itriedto update 4 Fuze Profile to the 1.09 via USB-Stick, but two of them are showing me that module 6 is empty now. The result is, that wether Focus nor Zoom is working on that two lamps. The other two lamps are working well and they show the module 6 as loaded.

Is there any idea what I can do to have module 6 loaded as well in the other two lamps? I tried several times with different USB-Sticks, but no result.

5/19/219:40 AM

❤️ 0

ELA GINESLighting Designer

make sure you are using a 2.0 usb. also where there any issues prior to the upload? any errors

5/19/219:46 AM

❤️ 0

RainschnMember

I'm using a USB Stick plugged into the lamp. No Hub.

One of the lamps had the same error before the update. Now another one has that empty Module 6 to and the Zoom and Focus doesn't work either.

The two other lamps are working well as before, after the update.

5/19/2110:30 AM

❤️ 0