Skip to main content

We have a music room with stage in our home. Son has 6 different lights (strobe, disco ball, etc...) that we would like to plug into one control board and set to the beat of music.

Any suggestions for a budget friendly board to acheive this? Each of the existing lights have regular 110 v plug.

Any advice / help is much appreciated!
Original Post

Replies sorted oldest to newest

Hi Seth. Welcome to the forums.
If your current lights do not have
DMX ( a 3 or 5 pin port that looks like a microphone cable plug) then you will need a Dimmer/Switch pack. Then with the switch pack you would plug in your lights power plug and then use a DMX board like the ADJ DMX operator. Take a look at the following links:
Dimmer/Switch pack: http://www.elationlighting.com...mmers%20and%20Relays
DMX board: http://www.elationlighting.com...20By%20American%20DJ
and also a good guide is the DMX 101 PDF we have.
http://www.elationlighting.com...dmx-101-handbook.pdf

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×