I am running CompuLive2006. I have scenes programmed into a PAGE named "Design Spot 250" that only control 4 DS250's. I also have scenes programmed into a PAGE named "Master" that control LED fixtures as well as the DS250's.
When I go to create or edit a scene in the Master PAGE, the pan (x) channel for all 4 DS250's has the value "85" highlighted in green. The problem is that when I increase the fader value, the number does not increase and the light does not move until I get above 85. Once I clear 85, the number increases, the light starts panning, and the highlight changes to a maroon color. I have noticed that the little red dot in the "space box" for each DS250 in the editor DOES move like it should.
When I go to create or edit a scene in the Design Spot 250 PAGE, everything works correctly, except I still see the value "85" highlighted in green. Even though the value does not increase until I get above 85, the light pans like it should from 0 to 85.
Does anyone know what might be causing this and how I can fix it to where I get the full range of pan out of the light, including the lower 85 values, in the Master PAGE scenes?
If it helps, the light (physically and profile) is set to 540 degrees of total pan. This problem is limiting my pan to 360 degrees. It's interesting to note that 360/540 = (255-85)/255.